Open Access

Uçucu Küllü Geopolimer Harcın Özellikleri

Hayrettin Tokay1*, Osman Gençel2
1Bartın Üniversitesi  , Bartın , Türkiye  
2Bartın Üniversitesi  , Bartın , Türkiye  
* Corresponding author: hayrettin.tokay@hotmail.com

Presented at the 3rd International Symposium on Innovative Approaches in Scientific Studies (Engineering and Natural Sciences) (ISAS2019-ENS), Ankara, Turkey, Apr 19, 2019

SETSCI Conference Proceedings, 2019, 4, Page (s): 184-189

Published Date: 01 June 2019

Bu çalışmanın hedefi, silis kumu (SK) ve Termik Santralinden elde edilen uçucu kül (UK) kullanılarak geopolimer harç üretmektir. Bu çalışmada uçucu külü aktive etmek için çimento yerine, aktivatör (Na2SiO3 ve NaOH) ve uçucu kül (UK) birleştirilip bağlayıcı madde olarak elde edilmiştir. NaOH derişimi 10 Molar (M) ve 15M olarak hazırlanmıştır. Daha sonra alkali çözelti olan sodyum hidroksit (SH) çözeltisi, sodyum silikat (SS) ile birleştirilmiştir. Ardından hacimce %50 ve %70 olan uçucu kül ile karıştırılmıştır.. Bunlara ilaveten silis kumu ve karışım suyu katılarak geopolimer harç numunesi üretilmiştir. Üretilen numunelere, su emme, taze ve kuru birim hacim ağırlığı, basınç dayanımı ve en son Mikroyapı Analizi için Taramalı Elektron Mikroskobu (SEM) deneyi yapılmıştır. Numuneler 4*4*16 cm boyutlarına sahiptir. Her seri üçer adet numuneden meydana gelmektedir.  

Keywords - Uçucu kül, aktivatör, alkali çözelti, geopolimer harç

[1] Aruntaş,H.Y. (2006). Uçucu küllerin inşaat sektöründe kullanım potansiyeli [The potential of fly ash usage in construction sector] Engineering and Architectural Faculty of Gazi University, 21-1, 193-203.

[2] Duxon P., Fernandez-Jimenez A., Provis J.L., Lukey G.C., Palomo A. ve van Deventer J.S.J. (2007). Geopolymer technology: The current state of the art, Journal of Materials Science, 42, 2917-293.

[3] Mahmut, O. (2015). Geopolimer Harç Üretiminde Elazığ Ferrekrom Cürufunun Kullanılması [Examination on the use of Elazığ Ferrochromium slag in the production of production of geopolymer concrete mortar] Master of Science Thesis, Düzce University, Institute of Science, Department of Civil Engineering, Düzce, 53p.

[4] Morrison. R.E. (1970). A Review of Ash Specifications. Symposium on Fly Ash Utilization. Pp. 24-31. Pittsburgh.

[5] Kantarcı, F. (2013). Elazığ Ferrekrom Cürufundan Alkali Aktivasyon Metoduyla Üretilen Geopolimer Çimentolu Betonların Yangın Dayanımının Araştırılması [Investıgatıon of fire resistance of geopolymer concrete produced from Elazığ ferrochrome slag by alkali activation method]Master’s Dissertation,Inönü University Graduate School of Natural and Applied Sciences Department of Civil Engineering ,Malatya, 131p.

[6] Görhan, G., Kürklü, G. (2014). Alkali Tuz İçeriğinin Geopolimer Cephe Kaplama Malzemesi Özelliklerine Etkisi [The effect of alkaline salt content on geopolymer surface materials properties] The 7th. National Symposium of Roof and Facade, 3-4 April 2014. Yıldız Technical University, Beşiktaş – İstanbul.

[7] Arıöz, E. (2015). Geopolimer Elde Edilmesi ve Katyon, pH ve Isıl İşlemin Geopolimer Üzerine Etkisi [Acquirement of geopolymer and the effect of cation, ph and curing conditions on the properties of geopolymers] Anadolu University Graduate School of Natural and Applied Sciences Chemical Engineering Program, Master’s Dissertation, Eskişehir, 236 p.

[8] Mahmut, O. (2015). Geopolimer Harç Üretiminde Elazığ Ferrekrom Cürufunun Kullanılması [Examination on the use of Elazığ Ferrochromium slag in the production of production of geopolymer concrete mortar] Master of Science Thesis, Düzce University, Institute of Science, Department of Civil
Engineering, Düzce, 53p.

[9] Girgin, S. (2016). NaOH ile Aktifleştirilmiş Metakaolin Katkılı Geopolimer Malzeme ÖzelliklerininAraştırılması [The investigation of properties of metakaolin additive geopolymer material activated with NaOH] Master’s Dissertation, Afyon Kocatepe University Graduate School of Natural and Applied Sciences Civil Engineering Department, Afyon, 64p.

[10] TS EN 12390-7,(2010). Sertleşmiş beton yoğunluğunun tayini, TSE, Ankara.

[11] TS EN 1015-11, (2000). Kagir Harcı Deney Metotları-Bölüm 11: Sertleşmiş Harcın Basınç ve Eğilme Dayanımının Tayini. Ankara: Türk Standartları Enstitüsü.

[12] Fernandez-Jimenez, A., Palomo, A. (2005). Composition and Microstructure of Alkali Activated Fly Ash Binder: Effect of the Activator, Cement and Concrete Research, 35, 1984-1992.

[13] Güler, G., Güler, E., İpekoğlu, Ü. veMordoğan,H.(2005). Uçucu Küllerin Özellikleri ve Kullanım Alanları. [The Properties and Using of Fly Ash] Turkey 19th International Mining Congress and Exhibition, IMCET2005, İzmir, Türkiye.

[14] Erdoğan, T. Y. (2013). Beton (4. bs.) [Concrete (4th ed.)]. METU Publishing, Ankara, 757p.

[15] Somna K., Jaturapitakkul C., Kajitvichyanukul P. ve Chindaprasirt P. (2011), NaOH-activated ground fly ash geopolymer cured at ambient temperature”, Fuel,90, 2118-2124.

[16] Aydın, T., Pehlivanlı, Z.O. (2017). Jeopolimer Esaslı Gözenekli Hafif Yapı Malzemelerinin Geliştirilmesi. Mühendislik dergisi, 8(1): 227-236.

0
Citations (Crossref)
16.8K
Total Views
324
Total Downloads

Licence Creative Commons This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
SETSCI 2026
info@set-science.com
Copyright © 2026 SETECH
Tokat Technology Development Zone Gaziosmanpaşa University Taşlıçiftlik Campus, 60240 TOKAT-TÜRKİYE