Presented at the 3rd International Symposium on Innovative Approaches in Scientific Studies (Engineering and Natural Sciences) (ISAS2019-ENS), Ankara, Turkey, Apr 19, 2019

SETSCI Conference Proceedings, 2019, 4, Page (s): 374-378 , https://doi.org/

Published Date: 01 June 2019    | 688     8

This work is about a system that generates electrical energy with the heat energy from the evaporator of the air conditioner and cools the environment. It is applicable to all types of air conditioner and air conditioning systems. It generates electrical energy using pressure generated by pumps and compressors used in closed loop using the coolant of the air conditioner. It is a system that ensures recycling by exchanging heat between coolant passing through heat exchangers and cycles. It consists of at least a fan, a main evaporator, a main pressurizing element connected to the main evaporator, a condenser and expansion valves. It is a design similar to turbines that operate with closed circuit, include at least one turbine and increase the pressure of the refrigerant at the turbine inlet allowing the refrigerant gas to rotate the turbine, allow the gas to be recirculated in the outlet of the turbine. It is the system that obtains electrical energy at the output of the alternator by increasing the speed by means of multiplexer with the energy received from the turbine. In other words, it is a system that provides electricity generation using the heat pump system in general.

Keywords - Heat pump, Electricity Generation, Turbine, Steam, Closed-cycle, System Design, Evaporator, Condenser, Heat Transfer, Heat Exchanger, Gas

[1] Savaş,S., Yalçın.E.,”Soğutma Sistemlerinde Bakım Onarım Revizyon (Bor) Öncesi Soğutucu Akışkan Stoklanması ”Mühendis ve Makina Dergisi,574,60, (2007)

[2] (2004) Üsküdar Mühendishanesi web site Erişim: http://uskudar.biz/m%C3%BChendishane/makaleler/kapal%C4%B1-devre-buhar-t%C3%BCrbini.html

[3] Lus,T.,”Submarine Hybrid Propulsion System”, Gydania, (2001)

[4] Dikici, A.,Esen M.,”Hava Kaynaklı Isı pompasının Elazığ Şartlarında Kullanımının Deneysel Olarak Araştırılması”, Fırat Üniversitesi, Teknik Eğitim Fakültesi, Makine Eğitimi Bölümü, Elazığ, (2005)

[5] Devecioğlu, A.,Oruç,V., Berk,U., Ender, S.,”İklimlendirme sistemlerinde R22 yerine R442A kullanılmasının enerji parametrelerine etkisinin incelenmesi”, Dicle Üniversitesi, Makine Mühendisliği Bölümü, Diyarbakır, (2016)

[6] Kabul,A., Kızılkan,Ö., Yakut,A., Süleyman Demirel Üniversitesi, Teknik Eğitim Fakültesi, Makine Eğitimi Bölümü,Isparta, (2010)

[7] Erdoğan,S, Yılmaz,M., Şahin,B., Özyurt,Ö., ”Isı Pompası Sistemlerinin Seçimi” ,Tesisat Mühendisliği Dergisi, 92, 40-49, (2006)