{
    "article_id": 801,
    "public_id": "002794b1-b7f2-4dca-9b5b-c5b8809d2065",
    "internal_identifier": null,
    "source_identifier": "39:166",
    "status": "published",
    "type": "research_article",
    "title": "Human Hair Fiber as a Reinforcement Material in Composite Structures",
    "title_secondary": null,
    "abstract": "In the last century, there has been an ever-increasing demand for novel materials namely known as composites.\r\nBiological fibers are reinforcement materials of composite structures owing to their economic and ecological advantages. Among\r\nthese fibers, plant fibers are mostly preferred as reinforcement materials. However, studies using animal fibers are also\r\nnoteworthy. Human hair, which considered as a waste material, is a favored biological non-degradable fiber in the field of\r\nadvanced engineering materials in recent years. Their low cost, elasticity, smoothness and tolerable mechanical properties\r\nascended their usage rates in composite structures. In addition to the utilization in thermoplastic and thermoset resins, human\r\nhair fiber also used in concrete materials. In this study, brief information about human hair fiber and its usage in composite\r\nmaterials are given and general information about the previous studies about human hair reinforced composites are discussed.  ",
    "language": "en",
    "english_title": null,
    "english_abstract": null,
    "doi": null,
    "doi_url": null,
    "resource_url": "https://www.set-science.com/a/002794b1-b7f2-4dca-9b5b-c5b8809d2065",
    "pdf_url": "https://www.set-science.com/a/002794b1-b7f2-4dca-9b5b-c5b8809d2065/pdf",
    "og_image": "https://www.set-science.com/assets/img/og-card-v2.png",
    "authors": [
        {
            "public_id": "2924ecc4-a191-40f6-a1c4-f9952de986b0",
            "given": "Hande",
            "family": "Zengin",
            "full": "Hande Zengin",
            "literal": null,
            "orcid": null,
            "orcid_url": null,
            "email": "sezginh@itu.edu.tr",
            "corresponding": true,
            "sequence": "first",
            "affiliations": [
                {
                    "name": "İstanbul Technical University",
                    "department": null,
                    "country": null,
                    "country_code": null,
                    "ror": null,
                    "ror_url": null
                }
            ]
        },
        {
            "public_id": "00604d8b-b799-4a5e-8e1f-5c6371921447",
            "given": "İpek",
            "family": "Yalçın Enis",
            "full": "İpek Yalçın Enis",
            "literal": null,
            "orcid": null,
            "orcid_url": null,
            "email": "sezginh@itu.edu.tr",
            "corresponding": false,
            "sequence": "additional",
            "affiliations": [
                {
                    "name": "İstanbul Technical University",
                    "department": null,
                    "country": null,
                    "country_code": null,
                    "ror": null,
                    "ror_url": null
                }
            ]
        }
    ],
    "keywords": [
        "textiles, composites, recycling, human hair fiber, concrete"
    ],
    "translations": [
        {
            "language": "en",
            "title": "Human Hair Fiber as a Reinforcement Material in Composite Structures",
            "abstract": "In the last century, there has been an ever-increasing demand for novel materials namely known as composites.\r\nBiological fibers are reinforcement materials of composite structures owing to their economic and ecological advantages. Among\r\nthese fibers, plant fibers are mostly preferred as reinforcement materials. However, studies using animal fibers are also\r\nnoteworthy. Human hair, which considered as a waste material, is a favored biological non-degradable fiber in the field of\r\nadvanced engineering materials in recent years. Their low cost, elasticity, smoothness and tolerable mechanical properties\r\nascended their usage rates in composite structures. In addition to the utilization in thermoplastic and thermoset resins, human\r\nhair fiber also used in concrete materials. In this study, brief information about human hair fiber and its usage in composite\r\nmaterials are given and general information about the previous studies about human hair reinforced composites are discussed.  \r\n",
            "keywords": [
                "textiles, composites, recycling, human hair fiber, concrete"
            ]
        }
    ],
    "subjects": [],
    "subject_names": [],
    "published_date": "2018-12-31",
    "published_year": "2018",
    "received_date": null,
    "accepted_date": null,
    "volume": "3",
    "issue": null,
    "page_first": "880",
    "page_last": "883",
    "article_number": null,
    "conference": {
        "short_name": "ISAS2018-Winter",
        "full_title": "2nd International Symposium on Innovative Approaches in Scientific Studies",
        "name": "2nd International Symposium on Innovative Approaches in Scientific Studies",
        "acronym": "ISAS2018-Winter",
        "location": "Samsun, Türkiye",
        "start_date": "2018-11-30",
        "end_date": null,
        "public_id": "b8a703cc-09f7-4d5b-ae60-eb31a1050720"
    },
    "proceedings": {
        "title": "2nd International Symposium on Innovative Approaches in Scientific Studies",
        "series_title": "Setsci conference indexing system",
        "publisher": "SET Technology",
        "isbn": null,
        "eisbn": null,
        "issn": "2618-6446",
        "eissn": null,
        "doi": null,
        "doi_prefix": null,
        "slug": "setsci-volume-3-2018-legacy-39",
        "public_id": "641f522e-9cf0-4c89-be17-c6037f3d1bca",
        "url": "https://www.set-science.com/p/setsci-volume-3-2018-legacy-39"
    },
    "license": {
        "name": "CC BY 4.0",
        "url": "https://creativecommons.org/licenses/by/4.0/",
        "code": "CC-BY-4.0",
        "open_access": true
    },
    "copyright": {
        "holder": "SET Technology",
        "year": "2018"
    },
    "funding_statement": null,
    "funders": [],
    "references": [
        {
            "order": 1,
            "raw": "S. Choudhry, and B. Pandey, “Mechanical behaviour of polypropylene and human hair fibres and polypropylene reinforced polymeric composites,” Int. J. Mech. Ind. Eng., vol. 2(1), pp. 118-121, 2012.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 2,
            "raw": "S. Manivel, S. Nisanth Kumar, S. Prakashchandar, and S. Anil Kumar, “Experimental Study on Human hair fiber reinforced concrete with partial replacement of cement by GGBFS,” Int. J. Civ. Eng. Technol., vol. 8(4), pp. 1123–1131, 2017.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 3,
            "raw": "W. A. Butt, B. A. Mir, and J. N. Jha, “Strength behavior of clayey soil reinforced with human hair as a natural fibre,” Geotech. Geol. Eng., vol. 34, pp. 411-417, 2016.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 4,
            "raw": "D. Jain, and A. Kothari, “Hair fibre reinforced concrete,” Res. J. Recent. Sci., vol. 1, pp. 128-133, 2012.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 5,
            "raw": "K. J. Vengatesan, T. Prasanth, V. K. S. Swagath Kumar, K. Suresh, and Prof. P. Chokkalingam, “Study on mechanical properties and structural\r\nanalysis of human hair fiber reinforced epoxy polymer,” Int. J. Adv. Res. Basic Eng. Sci. Technol., vol. 3, pp. 754-759, 2017.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 6,
            "raw": "B. P. Nanda, and Alok Satapathy, “Processing and characterization of epoxy composites reinforced with short human hair,” IOP Conf. Series: Mater. Sci. Eng., vol. 178, pp. 1-6, 2017.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 7,
            "raw": "V. G. Hiwarkar, P. S. Lanjewar, A. D. Bonode, and S. V. Somnathe, “Hair fibre reinforced concrete,” Int. J. Res. Sci. Eng., vol. 3, pp. 1-12, 2017.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 8,
            "raw": "A. Kumar, “A study on mechanical behaviour of hair fiber reinforced epoxy composites,” Bachelor Thesis, National Institute of Technology, Rourkela, 2014.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 9,
            "raw": "P. Divakara Rao, C. Udaya Kiran, and K. Eshwara Prasad, “Tensile studies on random oriented human hair fiber reinforced polyester composites,” J. Mech. Eng., vol. 47, pp. 37-44, 2017.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 10,
            "raw": "G. Sreevani, and B. Ajitha, “Human hair as fibre reinforcement in concrete,” Int. J. Eng. Sci. Comput., vol. 7, pp.11358- 11364, 2017.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 11,
            "raw": "M. V. Robles Velasco, T. C. de Sá Dias, A. Z. de Freitas, N. D. Vieira Júnior, C. A. Sales de Oliveira Pinto, T. M. Kaneko, and A. R. Baby,\r\n“Hair fiber characteristics and methods to evaluate hair physical and mechanical properties,” Braz. J. Pharm. Sci., vol. 45, pp. 1-10, 2009.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 12,
            "raw": "S. Gupta, and A. Sharma, “Human hair as fibre material in reinforced concrete,” International Conference on Advances in Construction Materials and Structures, Uttarakhand, India, March 7-8, 2018.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 13,
            "raw": "D. Senthilnathan, A. Gnanavel Babu, G. B. Bhaskar, and K. G. S. Gopinath, “Characterization of glass fibre – coconut coir– human hair hybrid composites,” Int. J. Eng. Technol., vol. 6(1), pp. 75-82, 2014.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 14,
            "raw": "S. Panneer Selvan, V. Jaiganesh, and K. Selvakumar, “Investigation of mechanical properties and optimization in drilling of jute and human hair hybrid composite,” International Conference on Advances in Design and Manufacturing, pp. 631-636, 2014.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 15,
            "raw": "G. Ragul, V. Jayakumar, S. U. Sha, R. Biswas, and C. Kumar, “Tensile strength improvement using human hair reinforcement in recycled high density polyethylene,” J. Sci. Ind. Res., vol. 77, pp. 410-413, 2018.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        }
    ],
    "statements": {
        "acknowledgements": null,
        "conflict_of_interest": null,
        "data_availability": null,
        "ai_disclosure": null
    },
    "credit": [],
    "history": {
        "published": "2018-12-31"
    }
}