{
    "article_id": 1107,
    "public_id": "0933547f-9ab8-4fb0-9c75-d775230c88e1",
    "internal_identifier": null,
    "source_identifier": "42:112",
    "status": "published",
    "type": "research_article",
    "title": "YANMA VE AĞAÇ MALZEME ÜZERİNE ETKİSİ",
    "title_secondary": null,
    "abstract": "Günümüzde ahşap malzeme hayatımızın her alanında kullanılmakta olup, sürekli kullanımdaki tercih edilebilirliği devam eden bir malzeme olarak karşımıza çıkmakta ve ahşap malzemenin önemini daha da arttırmaktadır. Yangın her zaman yaşadığımız ortamda meydana gelebilecek ve karşılaşabileceğimiz büyük tehlikeli bir olaydır. Hatta, yangına karşı en iyi bir şekilde korunmuş olan ahşap yapılarda dahi yangın tehlikesi tamamen ortadan kaldırılamamaktadır. Ahşabın kullanımı ile insanların tehlikelere karşı korunmalarının öneminin artmış olması nedeniyle yangında karşılaşabileceği olumsuz durumlara karşı ahşabın dayanımının arttırılması için çalışmaların yapılmasını daha da zorunlu hale getirmiştir. Malzemenin kullanım yerine uygun direnç ve dayanım özellikleri göstermesi, yangına dayanıklı olması malzeme seçiminde önemli bir etkendir. Ağaç malzemenin yangına karşı dayanımındaki verilerin ortaya çıkarılması oldukça önem arz etmektedir. Geçmişten günümüze kadar ülkemizde yanma deneylerinin ağaç malzeme üzerindeki etkisi konusundaki bilimsel gelişmeler kronolojik sıra göz önünde tutularak incelenmiştir.",
    "language": "tr",
    "english_title": "COMBUSTION AND EFFECT ON WOOD MATERIAL",
    "english_abstract": "Nowadays, wood material is used in every area of our life and it is seen as an ongoing material in continuous use and it increases the importance of wooden material. The fire is always a dangerous and dangerous event that can occur in the environment we live in. Even in the case of wooden structures that are best protected against fire, the fire hazard cannot be completely eliminated. As the importance of protecting people against hazards has increased due to the use of wood, it has become even more necessary to carry out studies to increase the strength of the wood against the negative situations that may be encountered in the fire. Resistance and resistance of the material to the place of use of the material, fire resistant is an important factor in material selection. It is very important to reveal the fire resistance of wood materials. The scientific developments on the effects of combustion tests on wood materials in our country from past to present have been examined by considering the chronological order.",
    "doi": null,
    "doi_url": null,
    "resource_url": "https://www.set-science.com/a/0933547f-9ab8-4fb0-9c75-d775230c88e1",
    "pdf_url": "https://www.set-science.com/a/0933547f-9ab8-4fb0-9c75-d775230c88e1/pdf",
    "og_image": "https://www.set-science.com/assets/img/og-card-v2.png",
    "authors": [
        {
            "public_id": "7701997f-e984-423b-9096-6ea6de8085e7",
            "given": "Hatice   ",
            "family": "ULUSOY",
            "full": "Hatice    ULUSOY",
            "literal": null,
            "orcid": null,
            "orcid_url": null,
            "email": "peker100@hotmail.com",
            "corresponding": false,
            "sequence": "first",
            "affiliations": [
                {
                    "name": "Muğla Sıtkı Koçman Üniversitesi  ",
                    "department": null,
                    "country": null,
                    "country_code": null,
                    "ror": null,
                    "ror_url": null
                }
            ]
        },
        {
            "public_id": "3eb14533-a443-4af0-b2a9-afabfb16677d",
            "given": "Hüseyin   ",
            "family": "PEKER",
            "full": "Hüseyin    PEKER",
            "literal": null,
            "orcid": null,
            "orcid_url": null,
            "email": "peker100@hotmail.com",
            "corresponding": true,
            "sequence": "additional",
            "affiliations": [
                {
                    "name": "Artvin Çoruh Üniversitesi  ",
                    "department": null,
                    "country": null,
                    "country_code": null,
                    "ror": null,
                    "ror_url": null
                }
            ]
        }
    ],
    "keywords": [],
    "translations": [
        {
            "language": "en",
            "title": "COMBUSTION AND EFFECT ON WOOD MATERIAL",
            "abstract": "Nowadays, wood material is used in every area of our life and it is seen as an ongoing material in continuous use and it increases the importance of wooden material. The fire is always a dangerous and dangerous event that can occur in the environment we live in. Even in the case of wooden structures that are best protected against fire, the fire hazard cannot be completely eliminated. As the importance of protecting people against hazards has increased due to the use of wood, it has become even more necessary to carry out studies to increase the strength of the wood against the negative situations that may be encountered in the fire. Resistance and resistance of the material to the place of use of the material, fire resistant is an important factor in material selection. It is very important to reveal the fire resistance of wood materials. The scientific developments on the effects of combustion tests on wood materials in our country from past to present have been examined by considering the chronological order.",
            "keywords": [
                "Yanma, Ağaç malzeme, Boyutsal stabilite, Fiziksel değişim"
            ]
        }
    ],
    "subjects": [],
    "subject_names": [],
    "published_date": "2019-06-01",
    "published_year": "2019",
    "received_date": null,
    "accepted_date": null,
    "volume": "4",
    "issue": null,
    "page_first": "585",
    "page_last": "587",
    "article_number": null,
    "conference": {
        "short_name": "ISAS2019-ENS",
        "full_title": "3rd International Symposium on Innovative Approaches in Scientific Studies (Engineering and Natural Sciences)",
        "name": "3rd International Symposium on Innovative Approaches in Scientific Studies (Engineering and Natural Sciences)",
        "acronym": "ISAS2019-ENS",
        "location": "Ankara, Türkiye",
        "start_date": "2019-04-19",
        "end_date": null,
        "public_id": "ed3b36e9-38cf-4aeb-a135-833c969cc89f"
    },
    "proceedings": {
        "title": "3rd International Symposium on Innovative Approaches in Scientific Studies (Engineering and Natural Sciences)",
        "series_title": "Setsci conference indexing system",
        "publisher": "SET Technology",
        "isbn": null,
        "eisbn": null,
        "issn": "2618-6446",
        "eissn": null,
        "doi": null,
        "doi_prefix": null,
        "slug": "setsci-volume-4-2019-legacy-42",
        "public_id": "24d215ef-a545-4351-9725-6e9bdb167b3c",
        "url": "https://www.set-science.com/p/setsci-volume-4-2019-legacy-42"
    },
    "license": {
        "name": "CC BY 4.0",
        "url": "https://creativecommons.org/licenses/by/4.0/",
        "code": "CC-BY-4.0",
        "open_access": true
    },
    "copyright": {
        "holder": "SET Technology",
        "year": "2019"
    },
    "funding_statement": null,
    "funders": [],
    "references": [
        {
            "order": 1,
            "raw": ".Sunar, Ş., \"Bina yangın güvenliği\", I. Yangın Ulusal Kurultayı, Ankara, 281-291 (1983).",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 2,
            "raw": ". Uysal, B., \"Çeşitli kimyasal maddelerin ağaç malzemenin yanmaya dayanıklılığı üzerine etkileri\", Doktora Tezi, Gazi Üniversitesi Fen Bilimleri Enstitüsü, Ankara, 6, 8, 9, 23-26 (1997).",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 3,
            "raw": ".. Eriç, M., \"Dünün ve bugünün ahşap ve ahşaptan üretilmiş malzemesinin türkiye şartları içinde yapıda rasyonel kullanılma imkanlarının araştınlması\", Doktora Tezi, İ.T.ÜMimarlık Fakültesi, İstanbul, 54-78 (1985).",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 4,
            "raw": ". Uysal, B., \"Çeşitli kimyasal maddelerin ağaç malzemenin yanmaya dayanıklılığı üzerine etkileri\", Doktora Tezi, Gazi Üniversitesi Fen Bilimleri Enstitüsü, Ankara, 6, 8, 9, 23-26 (1997).",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 5,
            "raw": ". White, R.H., \"Reporting of fire incidents in heavy timber structures\", Forest Products Laboratory Research Paper, USA, 464, 9 (1985).",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 6,
            "raw": ". Le Van, S.L., \"Thermal degredation\", Concise encylopedia of wood & wood based materials, Pergamon Press, New York, 271-273 (1989).",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 7,
            "raw": ". Kolman, F, Cote, J. R., Principles of Wood Science and Technology, I. Solid Wood: 149-151, Springer –Verlag, (1968).",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 8,
            "raw": ".Uysal, B., \"Çeşitli su itici ve yangın geciktirici kimyasal maddelerin kızılağaç odununun yanma özellikleri, Z.K.Ü.K.T.E.F. Teknoloji Dergisi, 2: 81-89 (1998).",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 9,
            "raw": ". Yalınkılıç, M.K., Demirci, Z. ve Baysal, E., \"Çeşitli emprenye maddelerinin duglas [Pseudotsuga menziesii (Mirb.) Frankco] odununun yanma özellikleri üzerine etkileri, Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi, 4(1-2): 613-624 (1998).",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 10,
            "raw": ". Baysal, E., Peker, H., Çolak, M., Tarımer, İ., \"Verniklenmiş ağaç malzemenin yanma özellikleri ve borlu bileşiklerle ön emprenye işleminin yanmayı geciktirici\r\nEtkisi\", F.Ü. Fen ve Mühendislik Bilimleri Dergisi, 15 (4): 645-653 (2003).",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 11,
            "raw": ". Terzi E (2008) Amonyum Bileşikleri ile Emprenye Edilen Ağaç Malzemenin Yanma Özellikleri. Yüksek Lisans Tezi (yayımlanmamıs), İÜ Fen Bilimleri Enstitüsü, Orman Endüstri Mühendisliği Anabilim Dalı, İstanbul, 106 s.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 12,
            "raw": ". Cavdar, A. D., Mengeloglu, F., Karakus, K., 2015. Effect of boric acid and borax on mechanical, fire and thermal properties of wood flour filled high density\r\npolyethylene composites. Measurement, 60: 6-12.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 13,
            "raw": ". Price, D., Anthony, G., Carty, P., 2001. Polymer combustion, condensed phase pyrolysis and smoke formation. Fire retardant materials. Cambridge, UK, 1-30.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 14,
            "raw": ". Chai, Y. B., Liu, J. L., Xing, Z., 2012. Dimensional stability, mechanical properties and fire resistance of MUFBoron treated wood. Material and Manufacturing Technology Ii, Pts 1 and 2, 341-342, pp.80-84.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 15,
            "raw": ".. Wu, G. F., Xu, M., 2014. Effects of boron compounds on the mechanical and fire properties of wood-chitosan and high-density polyethylene composites. Bioresources, 9(3): 4173-4193",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 16,
            "raw": ".Ayrilmis, N., 2013. Combined effects of boron and compatibilizer on dimensional stability and mechanical properties of wood/HDPE composites. Composites Part BEngineering, 44(1): 745-749.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 17,
            "raw": ".Altuntaş, E.,Karaoğul, E.,Alma, M.H., Odun plastik kompozitlerintermal ve yanma özellikleri üzerine borlu bileşiklerin etkisi, SDÜ Türkiye Ormancılık Dergisi, 2017, 18(3): 247-250",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 18,
            "raw": ". Sözen, E., Aydemir, D., Gündüz, G., Taş Suyu (Firetex) ile Emprenye Edilmiş Bazı Ağaç Türlerinin Termal (TGA) Özelliklerinin Belirlenmesi, 6. ASM Uluslararası Tarım ve Çevre Kongresi, 2018 Tam Metin Kitabı",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        }
    ],
    "statements": {
        "acknowledgements": null,
        "conflict_of_interest": null,
        "data_availability": null,
        "ai_disclosure": null
    },
    "credit": [],
    "history": {
        "published": "2019-06-01"
    }
}