{
    "article_id": 893,
    "public_id": "37613775-391b-4795-9de6-434826290bdb",
    "internal_identifier": null,
    "source_identifier": "39:258",
    "status": "published",
    "type": "research_article",
    "title": "LATTICE STRUCTURE OPTIMIZATION for ADDITIVE MANUFACTURING",
    "title_secondary": null,
    "abstract": "One of the major problems encountered designers working in the developing industry is how product can get better\r\ndesigns in the first stages. There are many structural optimization methods for weight reduction operations. One of them is the\r\nlattice structural optimization method. First, topology optimization process is applied on the model, then lattice structural\r\noptimization method is applied. The goal of topology optimization is to distribute the material for the best structural performance.\r\nThen the unnecessary material is removed from the model and the lattice structure is applied. The lattice contains complicated\r\nstructures using minimal material to fill the volume while maintaining rigidity of the model. After optimization, the structure has\r\na complicated geometry that it can’t be produced by conventional methods. In this case, the 3d printer/additive manufacturing is\r\nused for producing.\r\nThe statically analysis of the final model, obtained from the optimization, was conducted using the finite element method and\r\nthe results was compared with the initial design of the model. Positive results is obtained as a result of the comparison and it is\r\nshow that topology optimization and lattice structural optimization can be used in the design of vehicle elements.  ",
    "language": "en",
    "english_title": null,
    "english_abstract": null,
    "doi": null,
    "doi_url": null,
    "resource_url": "https://www.set-science.com/a/37613775-391b-4795-9de6-434826290bdb",
    "pdf_url": "https://www.set-science.com/a/37613775-391b-4795-9de6-434826290bdb/pdf",
    "og_image": "https://www.set-science.com/assets/img/og-card-v2.png",
    "authors": [
        {
            "public_id": "4503e41a-a930-46e3-a014-6faba5dcb058",
            "given": "Büşra",
            "family": "Aslan",
            "full": "Büşra Aslan",
            "literal": null,
            "orcid": null,
            "orcid_url": null,
            "email": "busra.aslan@btu.edu.tr",
            "corresponding": true,
            "sequence": "first",
            "affiliations": [
                {
                    "name": "Uludağ University",
                    "department": null,
                    "country": null,
                    "country_code": null,
                    "ror": null,
                    "ror_url": null
                }
            ]
        },
        {
            "public_id": "9f6d175a-c0d8-4845-849e-a2d5c8a497f4",
            "given": "Ali Rıza",
            "family": "Yıldız",
            "full": "Ali Rıza Yıldız",
            "literal": null,
            "orcid": null,
            "orcid_url": null,
            "email": "busra.aslan@btu.edu.tr",
            "corresponding": false,
            "sequence": "additional",
            "affiliations": [
                {
                    "name": "Bursa Technical University",
                    "department": null,
                    "country": null,
                    "country_code": null,
                    "ror": null,
                    "ror_url": null
                }
            ]
        }
    ],
    "keywords": [
        "Topology Optimization, Additive Manufacturing, Lattice Structure Optimization, Size Optimization, Finite Element Method"
    ],
    "translations": [
        {
            "language": "en",
            "title": "LATTICE STRUCTURE OPTIMIZATION for ADDITIVE MANUFACTURING",
            "abstract": "One of the major problems encountered designers working in the developing industry is how product can get better\r\ndesigns in the first stages. There are many structural optimization methods for weight reduction operations. One of them is the\r\nlattice structural optimization method. First, topology optimization process is applied on the model, then lattice structural\r\noptimization method is applied. The goal of topology optimization is to distribute the material for the best structural performance.\r\nThen the unnecessary material is removed from the model and the lattice structure is applied. The lattice contains complicated\r\nstructures using minimal material to fill the volume while maintaining rigidity of the model. After optimization, the structure has\r\na complicated geometry that it can’t be produced by conventional methods. In this case, the 3d printer/additive manufacturing is\r\nused for producing.\r\nThe statically analysis of the final model, obtained from the optimization, was conducted using the finite element method and\r\nthe results was compared with the initial design of the model. Positive results is obtained as a result of the comparison and it is\r\nshow that topology optimization and lattice structural optimization can be used in the design of vehicle elements.  \r\n",
            "keywords": [
                "Topology Optimization, Additive Manufacturing, Lattice Structure Optimization, Size Optimization, Finite Element Method"
            ]
        }
    ],
    "subjects": [],
    "subject_names": [],
    "published_date": "2018-12-31",
    "published_year": "2018",
    "received_date": null,
    "accepted_date": null,
    "volume": "3",
    "issue": null,
    "page_first": "1331",
    "page_last": "1334",
    "article_number": null,
    "conference": {
        "short_name": "ISAS2018-Winter",
        "full_title": "2nd International Symposium on Innovative Approaches in Scientific Studies",
        "name": "2nd International Symposium on Innovative Approaches in Scientific Studies",
        "acronym": "ISAS2018-Winter",
        "location": "Samsun, Türkiye",
        "start_date": "2018-11-30",
        "end_date": null,
        "public_id": "b8a703cc-09f7-4d5b-ae60-eb31a1050720"
    },
    "proceedings": {
        "title": "2nd International Symposium on Innovative Approaches in Scientific Studies",
        "series_title": "Setsci conference indexing system",
        "publisher": "SET Technology",
        "isbn": null,
        "eisbn": null,
        "issn": "2618-6446",
        "eissn": null,
        "doi": null,
        "doi_prefix": null,
        "slug": "setsci-volume-3-2018-legacy-39",
        "public_id": "641f522e-9cf0-4c89-be17-c6037f3d1bca",
        "url": "https://www.set-science.com/p/setsci-volume-3-2018-legacy-39"
    },
    "license": {
        "name": "CC BY 4.0",
        "url": "https://creativecommons.org/licenses/by/4.0/",
        "code": "CC-BY-4.0",
        "open_access": true
    },
    "copyright": {
        "holder": "SET Technology",
        "year": "2018"
    },
    "funding_statement": null,
    "funders": [],
    "references": [
        {
            "order": 1,
            "raw": "Çelik, İsmet, et al. \"HIZLI PROTOTİPLEME TEKNOLOJİLERİ VE UYGULAMA ALANLARI.\" Dumlupınar Üniversitesi Fen Bilimleri Enstitüsü Dergisi 031 (2013): 53-70.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 2,
            "raw": "http://www.acikbilim.com/2014/09/dosyalar/daha-hafif-daha-cevreciarabalar-cagi-2.html.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 3,
            "raw": "Işık, Efe. Topoloji optimizasyonu: Çatallı flanş uygulaması. Diss. DEÜ Fen Bilimleri Enstitüsü, 2009.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 4,
            "raw": "Yıldız, A. R., N. Kaya, and F. Öztürk. \"Taşıt elemanlarının optimum topoloji yaklaşımı ile tasarımı.\" Mühendis ve Makina44.516 (2003).",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 5,
            "raw": "http://blog.s-t.com.tr",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 6,
            "raw": "http://analizsimulasyon.com/2015/01/06/yapisal-optimizasyon",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 7,
            "raw": "Wong, Kaufui V., and Aldo Hernandez. \"A review of additive manufacturing.\" ISRN Mechanical Engineering 2012 (2012).",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 8,
            "raw": "Li, Qiang, Ibrahim Kucukkoc, and David Z. Zhang. \"Production planning in additive manufacturing and 3D printing.\" Computers & Operations Research 83 (2017): 157-172.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 9,
            "raw": "Thompson, Mary Kathryn, et al. \"Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints.\" CIRP annals 65.2 (2016): 737-760.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 10,
            "raw": "Guo, Nannan, and Ming C. Leu. \"Additive manufacturing: technology, applications and research needs.\" Frontiers of MechanicalEngineering 8.3 (2013): 215-243.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 11,
            "raw": "Hyperworks 14.0 Optistruct Tutorials and Examples",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        }
    ],
    "statements": {
        "acknowledgements": null,
        "conflict_of_interest": null,
        "data_availability": null,
        "ai_disclosure": null
    },
    "credit": [],
    "history": {
        "published": "2018-12-31"
    }
}