{ "article_id": 678, "public_id": "59d97881-aeca-41e8-917a-8c79c7f0b049", "internal_identifier": null, "source_identifier": "39:43", "status": "published", "type": "research_article", "title": "Impact Energy Consumption Capabilities of 3D Printed Specimens", "title_secondary": null, "abstract": "Additive manufacturing which is developed in the last half century is promising manufacturing technology. It uses\r\nlayer-wise production method for obtaining finished product. In recent years, thousand researches were made but there was still\r\ngaps about impact studies. In this study, the effect of fill pattern, filament material and layer thicknesses were investigated on\r\nthe impact energy consumption capabilities of 3D printed samples via drop weight impact test. The specimens were produced\r\nusing Fused Deposition Modelling (FDM) Method with various fill patterns, different filament material types and different layer\r\nthicknesses. PLA/ PHA, CPE, ABS and PC materials were used for the samples. 0.2, 0.15, 0.1 mm layer thickness were examined\r\nfor PLA/PHA material products. Concentric, Cubic, Cubic Subdivision, Linear, Triangle and Tetrahedral infill types are used.\r\nThe effect of room temperature was also investigated during printing of samples. For this aim, the printing area was scanned by\r\nthermal camera. As a result of this work, it is concluded that linear fill pattern had a significant difference in energy consumption\r\nby comparing other fill patterns. Infill rate and energy consumption capabilities of specimens were directly proportional for\r\nlinear and cubic subdivision infill type. It was observed that when thickness of layers is increased, the specimen strength was\r\nalso increased.  ", "language": "en", "english_title": null, "english_abstract": null, "doi": null, "doi_url": null, "resource_url": "https://www.set-science.com/a/59d97881-aeca-41e8-917a-8c79c7f0b049", "pdf_url": "https://www.set-science.com/a/59d97881-aeca-41e8-917a-8c79c7f0b049/pdf", "og_image": "https://www.set-science.com/assets/img/og-card-v2.png", "authors": [ { "public_id": "9dca8a3b-2498-4390-a50d-40ef49b1c6d9", "given": "Mümin", "family": "Bıyıklıoğlu", "full": "Mümin Bıyıklıoğlu", "literal": null, "orcid": null, "orcid_url": null, "email": "mumin.biyiklioglu@btu.edu.tr", "corresponding": false, "sequence": "first", "affiliations": [ { "name": "Bursa Technical University", "department": null, "country": null, "country_code": null, "ror": null, "ror_url": null } ] }, { "public_id": "8a3d3dda-c70d-4b3c-8762-b8e078da851f", "given": "Bahattin ", "family": "Kanber", "full": "Bahattin  Kanber", "literal": null, "orcid": null, "orcid_url": null, "email": "bahattin.kanber@btu.edu.tr", "corresponding": true, "sequence": "additional", "affiliations": [ { "name": "Bursa Technical University", "department": null, "country": null, "country_code": null, "ror": null, "ror_url": null } ] } ], "keywords": [ "Drop Weight Impact Test, FDM, Additive Manufacturing, Printing Properties, Energy Consumption" ], "translations": [ { "language": "en", "title": "Impact Energy Consumption Capabilities of 3D Printed Specimens", "abstract": "Additive manufacturing which is developed in the last half century is promising manufacturing technology. It uses\r\nlayer-wise production method for obtaining finished product. In recent years, thousand researches were made but there was still\r\ngaps about impact studies. In this study, the effect of fill pattern, filament material and layer thicknesses were investigated on\r\nthe impact energy consumption capabilities of 3D printed samples via drop weight impact test. The specimens were produced\r\nusing Fused Deposition Modelling (FDM) Method with various fill patterns, different filament material types and different layer\r\nthicknesses. PLA/ PHA, CPE, ABS and PC materials were used for the samples. 0.2, 0.15, 0.1 mm layer thickness were examined\r\nfor PLA/PHA material products. Concentric, Cubic, Cubic Subdivision, Linear, Triangle and Tetrahedral infill types are used.\r\nThe effect of room temperature was also investigated during printing of samples. For this aim, the printing area was scanned by\r\nthermal camera. As a result of this work, it is concluded that linear fill pattern had a significant difference in energy consumption\r\nby comparing other fill patterns. Infill rate and energy consumption capabilities of specimens were directly proportional for\r\nlinear and cubic subdivision infill type. It was observed that when thickness of layers is increased, the specimen strength was\r\nalso increased.  \r\n", "keywords": [ "Drop Weight Impact Test, FDM, Additive Manufacturing, Printing Properties, Energy Consumption" ] } ], "subjects": [], "subject_names": [], "published_date": "2018-12-31", "published_year": "2018", "received_date": null, "accepted_date": null, "volume": "3", "issue": null, "page_first": "236", "page_last": "238", "article_number": null, "conference": { "short_name": "ISAS2018-Winter", "full_title": "2nd International Symposium on Innovative Approaches in Scientific Studies", "name": "2nd International Symposium on Innovative Approaches in Scientific Studies", "acronym": "ISAS2018-Winter", "location": "Samsun, Türkiye", "start_date": "2018-11-30", "end_date": null, "public_id": "b8a703cc-09f7-4d5b-ae60-eb31a1050720" }, "proceedings": { "title": "2nd International Symposium on Innovative Approaches in Scientific Studies", "series_title": "Setsci conference indexing system", "publisher": "SET Technology", "isbn": null, "eisbn": null, "issn": "2618-6446", "eissn": null, "doi": null, "doi_prefix": null, "slug": "setsci-volume-3-2018-legacy-39", "public_id": "641f522e-9cf0-4c89-be17-c6037f3d1bca", "url": "https://www.set-science.com/p/setsci-volume-3-2018-legacy-39" }, "license": { "name": "CC BY 4.0", "url": "https://creativecommons.org/licenses/by/4.0/", "code": "CC-BY-4.0", "open_access": true }, "copyright": { "holder": "SET Technology", "year": "2018" }, "funding_statement": null, "funders": [], "references": [ { "order": 1, "raw": "O.S Cornerio et. al. / Materials & Design 83(2015)768-776", "doi": null, "title": null, "authors": null, "source": null, "year": null, "volume": null, "pages": null }, { "order": 2, "raw": "R. Zou et. al. / Composites Part B 99(2016)506-513", "doi": null, "title": null, "authors": null, "source": null, "year": null, "volume": null, "pages": null }, { "order": 3, "raw": "M. Domingo – Espin et. al. / Material & Design 83(2015)670-677", "doi": null, "title": null, "authors": null, "source": null, "year": null, "volume": null, "pages": null }, { "order": 4, "raw": "J.S. Chacon / Materials and Design 124(2017)143-157", "doi": null, "title": null, "authors": null, "source": null, "year": null, "volume": null, "pages": null }, { "order": 5, "raw": "A. Tsouknidas et. al. / Materials and Design 102(2016)41-44", "doi": null, "title": null, "authors": null, "source": null, "year": null, "volume": null, "pages": null } ], "statements": { "acknowledgements": null, "conflict_of_interest": null, "data_availability": null, "ai_disclosure": null }, "credit": [], "history": { "published": "2018-12-31" } }