{
    "article_id": 784,
    "public_id": "7ab4674b-1ef8-439f-a8a4-427c9f138d33",
    "internal_identifier": null,
    "source_identifier": "39:149",
    "status": "published",
    "type": "research_article",
    "title": "Kaolenlerin Jeopolimer Üretiminde Kullanılabilirliği",
    "title_secondary": null,
    "abstract": "Bu çalışmanın amacı, Al2O3 ve SiO2 kaynağı olarak seramik üretiminde kullanılan 5 farklı kaolenin jeopolimer üretiminde\r\nkullanılabilirliğinin araştırılmasıdır. Bu amaçla beraber öğütülen kaolen-NaOH karışımları su ile birleştirilip preslenmiştir. Taze\r\njeopolimerlere farklı (40, 80 ve 120˚C) sıcaklıklarda kür uygulanmıştır. Kür sonrası sertleşen jeopolimerlerin birim hacim ağırlık,\r\nultrases hızı, basınç dayanımı testleri ve XRD, SEM-EDX analizleri yapılmıştır. SEM-EDX analizlerinde kaolen taneleri\r\nyüzeylerinde oluşan jeopolimerleşme net olarak görülmüştür. Tane-tane bağlarının oluşan jeopolimerik yapı ile güçlendirilmesi\r\nsonucu en yüksek dayanım yaklaşık 55 MPa olarak elde edilmiştir. En yüksek dayanımı veren kaolenin ham özelikleri ve bu\r\nkaolen ile yapılan jeopolimerin mineralojik ve içyapı özelikleri detaylı olarak çalışılmıştır. Çalışmada jeopolimer üretimi için\r\nher kaolenin uygun olmayacağı bu nedenle de kaolen örneklerinin jeopolimerizasyon mekanizmalarının incelenerek\r\nkullanılabileceği görülmüştür.  ",
    "language": "tr",
    "english_title": "Usability of Kaolins in Geopolymer Production",
    "english_abstract": "The purpose of this study is to investigate the usability of 5 different kaolin used in ceramic production as a source of Al2O3 and SiO2 in geopolymer production. For this purpose, co-grinded kaolin-NaOH mixtures were combined with water and pressed. Fresh geopolymers are cured at different temperatures (40, 80 and 120℃). Unit weight, ultrasonic pulse velocity, compressive strength tests and XRD, SEM-EDX analyzes were performed on hardened geopolymer samples. Geopolymerization on kaolin grain surfaces was clearly seen in SEM-EDX analysis. As a result of the strengthening of the grain-grain bonds with the geopolymeric structure, the highest strength was approximately 55 MPa. The raw properties of kaolin which gives the highest strength and the mineralogical and internal structures of geopolymer made with this kaolin were studied in detail. In this study, it was observed that not every kaolin would be suitable for geopolymer production and therefore geopolymerization mechanisms of kaolin samples could be analysed before using.",
    "doi": null,
    "doi_url": null,
    "resource_url": "https://www.set-science.com/a/7ab4674b-1ef8-439f-a8a4-427c9f138d33",
    "pdf_url": "https://www.set-science.com/a/7ab4674b-1ef8-439f-a8a4-427c9f138d33/pdf",
    "og_image": "https://www.set-science.com/assets/img/og-card-v2.png",
    "authors": [
        {
            "public_id": "6c2bfdca-8cca-4723-8d74-1ce7106331e2",
            "given": "Özgül",
            "family": "Boyacı",
            "full": "Özgül Boyacı",
            "literal": null,
            "orcid": null,
            "orcid_url": null,
            "email": "mugur.toprak@dpu.edu.tr",
            "corresponding": false,
            "sequence": "first",
            "affiliations": [
                {
                    "name": "Kütayha Dumlupınar University",
                    "department": null,
                    "country": null,
                    "country_code": null,
                    "ror": null,
                    "ror_url": null
                }
            ]
        },
        {
            "public_id": "692d7ff8-bdee-4a95-a419-25d52e6e8ea5",
            "given": "Veli",
            "family": "Uz",
            "full": "Veli Uz",
            "literal": null,
            "orcid": null,
            "orcid_url": null,
            "email": "mugur.toprak@dpu.edu.tr",
            "corresponding": false,
            "sequence": "additional",
            "affiliations": [
                {
                    "name": "Kütayha Dumlupınar University",
                    "department": null,
                    "country": null,
                    "country_code": null,
                    "ror": null,
                    "ror_url": null
                }
            ]
        },
        {
            "public_id": "4d374771-18c6-4f77-8e73-36ac5389d8b6",
            "given": "Mehmet Uğur",
            "family": "Toprak",
            "full": "Mehmet Uğur Toprak",
            "literal": null,
            "orcid": null,
            "orcid_url": null,
            "email": "mugur.toprak@dpu.edu.tr",
            "corresponding": true,
            "sequence": "additional",
            "affiliations": [
                {
                    "name": "Kütayha Dumlupınar University",
                    "department": null,
                    "country": null,
                    "country_code": null,
                    "ror": null,
                    "ror_url": null
                }
            ]
        },
        {
            "public_id": "120a6a43-dbf9-43ad-a62c-d63e7c7dbe27",
            "given": "Nihal",
            "family": "Derin Çoşkun",
            "full": "Nihal Derin Çoşkun",
            "literal": null,
            "orcid": null,
            "orcid_url": null,
            "email": "nihalderincoskun@odu.edu.tr",
            "corresponding": false,
            "sequence": "additional",
            "affiliations": [
                {
                    "name": "Ordu University",
                    "department": null,
                    "country": null,
                    "country_code": null,
                    "ror": null,
                    "ror_url": null
                }
            ]
        }
    ],
    "keywords": [],
    "translations": [
        {
            "language": "en",
            "title": "Usability of Kaolins in Geopolymer Production",
            "abstract": "The purpose of this study is to investigate the usability of 5 different kaolin used in ceramic production as a source of Al2O3 and SiO2 in geopolymer production. For this purpose, co-grinded kaolin-NaOH mixtures were combined with water and pressed. Fresh geopolymers are cured at different temperatures (40, 80 and 120℃). Unit weight, ultrasonic pulse velocity, compressive strength tests and XRD, SEM-EDX analyzes were performed on hardened geopolymer samples. Geopolymerization on kaolin grain surfaces was clearly seen in SEM-EDX analysis. As a result of the strengthening of the grain-grain bonds with the geopolymeric structure, the highest strength was approximately 55 MPa. The raw properties of kaolin which gives the highest strength and the mineralogical and internal structures of geopolymer made with this kaolin were studied in detail. In this study, it was observed that not every kaolin would be suitable for geopolymer production and therefore geopolymerization mechanisms of kaolin samples could be analysed before using.",
            "keywords": [
                "Jeopolimer, Kaolen, SEM-EDX, Basınç dayanımı"
            ]
        }
    ],
    "subjects": [],
    "subject_names": [],
    "published_date": "2018-12-31",
    "published_year": "2018",
    "received_date": null,
    "accepted_date": null,
    "volume": "3",
    "issue": null,
    "page_first": "772",
    "page_last": "778",
    "article_number": null,
    "conference": {
        "short_name": "ISAS2018-Winter",
        "full_title": "2nd International Symposium on Innovative Approaches in Scientific Studies",
        "name": "2nd International Symposium on Innovative Approaches in Scientific Studies",
        "acronym": "ISAS2018-Winter",
        "location": "Samsun, Türkiye",
        "start_date": "2018-11-30",
        "end_date": null,
        "public_id": "b8a703cc-09f7-4d5b-ae60-eb31a1050720"
    },
    "proceedings": {
        "title": "2nd International Symposium on Innovative Approaches in Scientific Studies",
        "series_title": "Setsci conference indexing system",
        "publisher": "SET Technology",
        "isbn": null,
        "eisbn": null,
        "issn": "2618-6446",
        "eissn": null,
        "doi": null,
        "doi_prefix": null,
        "slug": "setsci-volume-3-2018-legacy-39",
        "public_id": "641f522e-9cf0-4c89-be17-c6037f3d1bca",
        "url": "https://www.set-science.com/p/setsci-volume-3-2018-legacy-39"
    },
    "license": {
        "name": "CC BY 4.0",
        "url": "https://creativecommons.org/licenses/by/4.0/",
        "code": "CC-BY-4.0",
        "open_access": true
    },
    "copyright": {
        "holder": "SET Technology",
        "year": "2018"
    },
    "funding_statement": null,
    "funders": [],
    "references": [
        {
            "order": 1,
            "raw": "P.C. Aiitcin, Cements of yesterday and today: Concrete of tomorrow, Cem. Concr. Res., 30, 1349-1359, 2000.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 2,
            "raw": "M.C.G. Juenger; F. Winnerfeld; J.L. Provis; H.H. Ideker, Advances in alternative cementitious binders. Cem. Concr. Res., 41, 1232-1243, 2011.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 3,
            "raw": "N.V. Castaldelli, J.L. Akasaki, J.L.P. Melges, M.M. Tashima, L. Soriano, M.V. Borrachero, J. Monzo, J.Paya, Use of Slag/Suger Cane Bagasse Ash (SCBA) Blends in\r\nthe Production of alkali-Activated Materials, Materials 6, 3108-3127, 2013.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 4,
            "raw": "J. Davidovits, Geopolymer Chemistry and Applications, Saint Quantin, France, 2008.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 5,
            "raw": "P. Duxson, J.L. Provis, G.C. Lukey, S.W. Mallicoat, W.M. Kriven ve J.S.J. Deventer, Understanding The Relationship Between Geopolymer Composition, Microstructure And Mechanical Properties, Colloids and Surfaces A: Physicochem. Eng. Aspects, 269, 47-58, 2005.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 6,
            "raw": "A. Fernandez-Jimenez, A. Palomo, Composition and Microstructure of Alkali Activated Fly Ash Binder: Effect of the Activator, Cement and Concrete Research, 35, 1984- 1992, 2005.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 7,
            "raw": "R.R. Lloyd, J.L. Provis, ve J.S.J. Deventer, Microscopy And Microanalysis Of Inorganic Polymer Cements.2: The gel binder, J. Mater. Sci, 44, 620-631, 2009.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 8,
            "raw": "A. Palomo, M.W. Grutzeck, ve M.T. Blanco, Alkali – activated fly ashes A cement fort he future, Cement and Concrete Research, 29: 1323-1329, 1999.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 9,
            "raw": "D. Panias, I.P. Giannopoulou, ve T. Perraki, Effect of synthesis parameters on the mechanical properties of fly ash-based geopolymers, Colloids and Surfaces A:\r\nPhysicochem. Eng. Aspects, 301, 246-254, 2007.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 10,
            "raw": "Ç. Salam, Fiziksel ve kimyasal işlemlerin kaolinin yapısına etkisi, Yüksek Lisans Tezi, Balıkesir Üniversitesi Fen Bilimleri Enstitüsü, Balıkesir, 2004.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 11,
            "raw": "S. ThokchoM, P. Ghosh, S. Ghosh Effect of Na2O Content on Durability of Geopolymer Mortars in Sulphuric Acid, International Journal of Natural Sciences and\r\nEngineering, 77-82, 2009.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 12,
            "raw": "M. Tokyay, P. Ayturan, Mineral katkıların alkali ile aktive edilmesi: Bölüm 2, Çimento ve Beton Dünyası, 15-89, 77-91, 2010.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 13,
            "raw": "H. Xu, ve J.S.J. Deventer, The Geopolymerisation Of Alumino-Silicate Minerals, Int. J. Miner. Process, S.59, 247-266, 2000.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 14,
            "raw": "H. Binici, M. Eken, O. Aksoğan, Cüruf, uçucu kül, silis kumu ve pomza esaslı geopolimerlerin fiziksel, mekanik ve radyasyon geçirgenlik özellikleri, Yapı Teknolojileri Elektronik Dergisi, Cilt: 8, No: 2, 2012 (12-25).",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 15,
            "raw": "Z. Li, Z. Ding, Y. Zhang, Development of sustainable cementitious materials, Int. Workshop on Sustainable Development and Concrete Technology, China, 55-76,\r\n2004.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 16,
            "raw": "B.V. Rangan, Fly Ash-Based Geopolymer Concrete, Research Report, No.4, Engineering Faculty, Curtin University of Tech., Perth, Australia, 44s, 2008.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 17,
            "raw": "U. Rattanasak, ve P. Chindaprasirt, Influence of NaOH solution on the synthesis of fly ash geopolymer, Minerals Engineering, 22: 1073-1078, 2009.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 18,
            "raw": "B. Özgül, Farklı kaolenlerin metakaolen ve spinel yapılarda geopolimer davranışı, Yüksek Lisans Tezi, Dumlupınar Üniversitesi, Fen Bilimleri Enstitüsü, Kütahya, 2018.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        }
    ],
    "statements": {
        "acknowledgements": null,
        "conflict_of_interest": null,
        "data_availability": null,
        "ai_disclosure": null
    },
    "credit": [],
    "history": {
        "published": "2018-12-31"
    }
}