{
    "article_id": 639,
    "public_id": "849ec175-7d53-4c3e-bac3-fd896ec2e8b5",
    "internal_identifier": null,
    "source_identifier": "39:4",
    "status": "published",
    "type": "abstract_only",
    "title": "Atık Isı Kazanımının Deneysel Tasarım Metoduyla Optimizasyonu",
    "title_secondary": null,
    "abstract": "Bu çalışma; havadan havaya bir atık ısı geri kazanım uygulamasında ısıl performansı etkileyen faktörlerin optimum değerlerinin araştırılması üzerinedir. Sistemde ısı transferini gerçekleştirmek üzere polimer malzemeden imal edilmiş çapraz akışlı plakalı ısı değiştirici kullanılmıştır. Taze hava giriş sıcaklığı, hava akış hızı ve egzoz havası giriş sıcaklığı çalışma parametreleri olarak belirlenmiştir. Her parametre için ikişer düzey seçilerek L8 tam faktöriyel deney tasarımı uygulanmıştır. Analizler için Minitab istatistiksel yazılım programından faydalanılmıştır. Deneysel çalışma ve hesaplamalar neticesinde ısıl etkenlik üzerinde en etkili faktörün hava hızı olduğu sonucuna varılmıştır. Son olarak maksimum ısı transferine imkân verecek parametre kombinasyonları ortaya konmuştur  ",
    "language": "tr",
    "english_title": "Optimization of Waste Heat Recovery Using Experimental Design Method",
    "english_abstract": "This study focuses on investigating the optimum values ​​of factors affecting thermal performance in an air-to-air waste heat recovery application. A cross-flow plate heat exchanger made of polymer material was used to perform heat transfer in the system. Fresh air inlet temperature, air flow velocity, and exhaust air inlet temperature were determined as operating parameters. An L8 full factorial experimental design was applied by selecting two levels for each parameter. Minitab statistical software was used for the analyses. As a result of the experimental study and calculations, it was concluded that the most effective factor on thermal efficiency is air velocity. Finally, parameter combinations that allow for maximum heat transfer were determined.",
    "doi": null,
    "doi_url": null,
    "resource_url": "https://www.set-science.com/a/849ec175-7d53-4c3e-bac3-fd896ec2e8b5",
    "pdf_url": null,
    "og_image": "https://www.set-science.com/assets/img/og-card-v2.png",
    "authors": [
        {
            "public_id": "f2f231b7-427a-4f91-8a45-8a83fffb1533",
            "given": "Ahmet Fevzi",
            "family": "Savaş",
            "full": "Ahmet Fevzi Savaş",
            "literal": null,
            "orcid": null,
            "orcid_url": null,
            "email": "ahmetfevzi.savas@bilecik.edu.tr",
            "corresponding": true,
            "sequence": "first",
            "affiliations": [
                {
                    "name": "Bilecik Şeyh Edebali University ",
                    "department": null,
                    "country": null,
                    "country_code": null,
                    "ror": null,
                    "ror_url": null
                }
            ]
        },
        {
            "public_id": "865aa4e9-8de2-45db-9b53-8f600348c52f",
            "given": "Ceyda",
            "family": "Kocabaş",
            "full": "Ceyda Kocabaş",
            "literal": null,
            "orcid": null,
            "orcid_url": null,
            "email": "ceyda.pak@bilecik.edu.tr",
            "corresponding": false,
            "sequence": "additional",
            "affiliations": [
                {
                    "name": "Bilecik Şeyh Edebali University ",
                    "department": null,
                    "country": null,
                    "country_code": null,
                    "ror": null,
                    "ror_url": null
                }
            ]
        }
    ],
    "keywords": [
        "Deney tasarımı",
        "Plakalı ısı değiştirici",
        "Polimer",
        "Atık ısı geri kazanımı",
        "Isıl etkenlik"
    ],
    "translations": [
        {
            "language": "en",
            "title": "Optimization of Waste Heat Recovery Using Experimental Design Method",
            "abstract": "This study focuses on investigating the optimum values ​​of factors affecting thermal performance in an air-to-air waste heat recovery application. A cross-flow plate heat exchanger made of polymer material was used to perform heat transfer in the system. Fresh air inlet temperature, air flow velocity, and exhaust air inlet temperature were determined as operating parameters. An L8 full factorial experimental design was applied by selecting two levels for each parameter. Minitab statistical software was used for the analyses. As a result of the experimental study and calculations, it was concluded that the most effective factor on thermal efficiency is air velocity. Finally, parameter combinations that allow for maximum heat transfer were determined.",
            "keywords": [
                "Experimental design",
                "Plate heat exchanger",
                "Polymer",
                "Waste heat recovery",
                "Thermal conductivity"
            ]
        }
    ],
    "subjects": [],
    "subject_names": [],
    "published_date": "2018-12-31",
    "published_year": "2018",
    "received_date": null,
    "accepted_date": null,
    "volume": "3",
    "issue": null,
    "page_first": "20",
    "page_last": "24",
    "article_number": null,
    "conference": {
        "short_name": "ISAS2018-Winter",
        "full_title": "2nd International Symposium on Innovative Approaches in Scientific Studies",
        "name": "2nd International Symposium on Innovative Approaches in Scientific Studies",
        "acronym": "ISAS2018-Winter",
        "location": "Samsun, Türkiye",
        "start_date": "2018-11-30",
        "end_date": null,
        "public_id": "b8a703cc-09f7-4d5b-ae60-eb31a1050720"
    },
    "proceedings": {
        "title": "2nd International Symposium on Innovative Approaches in Scientific Studies",
        "series_title": "Setsci conference indexing system",
        "publisher": "SET Technology",
        "isbn": null,
        "eisbn": null,
        "issn": "2618-6446",
        "eissn": null,
        "doi": null,
        "doi_prefix": null,
        "slug": "setsci-volume-3-2018-legacy-39",
        "public_id": "641f522e-9cf0-4c89-be17-c6037f3d1bca",
        "url": "https://www.set-science.com/p/setsci-volume-3-2018-legacy-39"
    },
    "license": {
        "name": "CC BY 4.0",
        "url": "https://creativecommons.org/licenses/by/4.0/",
        "code": "CC-BY-4.0",
        "open_access": true
    },
    "copyright": {
        "holder": "SET Technology",
        "year": "2018"
    },
    "funding_statement": null,
    "funders": [],
    "references": [
        {
            "order": 1,
            "raw": "C. T. Joen, Y. Park, Q. Wang, A. Sommers, X. Han and A. Jacobi, “A review on polymer heat exchangers for HVAC&R applications,” International Journal Of Refrigerations, vol. 32, pp. 763-779, 2009.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 2,
            "raw": "S.H. Noie, “Investigation of thermal performance of an air-to-air thermosyphon heat exchanger using ε NTU method,” Applied Thermal Engineering, vol. 26, pp. 559-567, 2006.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 3,
            "raw": "L. Chen, Z. Li ve Z.-Y. Guo, “Experimental investigation of plastic finned-tube heat exchangers, with emphasis on material thermal conductivity,” Experimental Thermal and Fluid Science, vo. 33, pp. 922–928, 2009.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 4,
            "raw": "J. Fernandez-Seara, R. Diz, F.J. Uhia, A. Dopazo ve J. M Ferro, “Experimental analysis of an air-to-air heat recovery unit for balanced ventilation systems in residential buildings,” Energy Conversion and Management, vol. 52, pp. 635–640, 2011.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 5,
            "raw": "C. Kocabaş and A.F. Savaş, “Comparison of waste heat recovery performances of plate-fin heat exchangers produced from different materials,” Contemporary Engineering Sciences, vol. 8(11), pp. 453 – 466, 2015.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 6,
            "raw": "C. Danışman, “ Plakalı eşanjör etkinlik parametrelerinin deneysel analizi,” Yüksek Lisans Tezi, Osmangazi Üniversitesi, Fen Bilimleri Enstitüsü, Eskişehir, 2010.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 7,
            "raw": "B. Gökçe, “Metalürjik deneylerin taguchi ve genetik algoritmalar yöntemleri kullanılarak tasarımı,” Doktora Tezi, Afyon Kocatepe Üniversitesi, Fen Bilimleri Enstitüsü, Afyon, 2009.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 8,
            "raw": "C. Kocabaş, “Farklı malzemelerden imal edilmiş plakalı ısı değiştiricilerinin atık ısı geri kazanım performanslarının deneysel analizi,” Yüksek Lisans Tezi, Bilecik Şeyh Üniversitesi, Fen Bilimleri Enstitüsü, Bilecik, 2014.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 9,
            "raw": "M. Şirvancı, Kalite İçin Deney Tasarımı Taguçi Yaklaşımı, 1. Baskı, İstanbul, Türkiye: Literatür Yayınları, 1997.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        }
    ],
    "statements": {
        "acknowledgements": null,
        "conflict_of_interest": null,
        "data_availability": null,
        "ai_disclosure": null
    },
    "credit": [],
    "history": {
        "published": "2018-12-31"
    }
}