{ "article_id": 312, "public_id": "8d219622-27bf-4b42-b1cd-aedd594471e9", "internal_identifier": null, "source_identifier": "1:37", "status": "published", "type": "research_article", "title": "The resistance spot weldability of AISI 430 ferritic stainless steel", "title_secondary": null, "abstract": "In this study, AISI 430 ferritic stainless steel sheet with 0.6 mm thickness was joined by resistance spot welding at different welding times and currents. The effects of welding parameters on the mechanical properties of welded samples are defined in terms of peak load. The hardness profile and the microstructure of the joint were also evaluated. Experimental results have shown that the welding time must be reduced while the welding current is increased in order to increase the tensile strength. According to microstructure investigation, the grain coarsening occurs in the HAZ in all the samples.  ", "language": "en", "english_title": null, "english_abstract": null, "doi": null, "doi_url": null, "resource_url": "https://www.set-science.com/a/8d219622-27bf-4b42-b1cd-aedd594471e9", "pdf_url": "https://www.set-science.com/a/8d219622-27bf-4b42-b1cd-aedd594471e9/pdf", "og_image": "https://www.set-science.com/assets/img/og-card-v2.png", "authors": [ { "public_id": "62e4304d-2abc-41e2-bf61-670a6c1e2279", "given": "Yahya", "family": "Altunpak", "full": "Yahya Altunpak", "literal": null, "orcid": null, "orcid_url": null, "email": "altunpak_y@ibu.edu.tr", "corresponding": true, "sequence": "first", "affiliations": [ { "name": "Abant Izzet Baysal University  ", "department": null, "country": null, "country_code": null, "ror": null, "ror_url": null } ] } ], "keywords": [ "Resistance spot welding; CuCr electrode; ferritic stainless steel" ], "translations": [ { "language": "en", "title": "The resistance spot weldability of AISI 430 ferritic stainless steel", "abstract": "In this study, AISI 430 ferritic stainless steel sheet with 0.6 mm thickness was joined by resistance spot welding at different welding times and currents. The effects of welding parameters on the mechanical properties of welded samples are defined in terms of peak load. The hardness profile and the microstructure of the joint were also evaluated. Experimental results have shown that the welding time must be reduced while the welding current is increased in order to increase the tensile strength. According to microstructure investigation, the grain coarsening occurs in the HAZ in all the samples.  \r\n", "keywords": [ "Resistance spot welding; CuCr electrode; ferritic stainless steel" ] } ], "subjects": [], "subject_names": [], "published_date": "2017-12-08", "published_year": "2017", "received_date": null, "accepted_date": null, "volume": "1", "issue": null, "page_first": "160", "page_last": "162", "article_number": null, "conference": { "short_name": "ISMSIT2017", "full_title": "International Symposium on Multidisciplinary Studies and Innovative Technologies", "name": "International Symposium on Multidisciplinary Studies and Innovative Technologies", "acronym": "ISMSIT2017", "location": "Tokat, Türkiye", "start_date": "2017-12-02", "end_date": null, "public_id": "a63b4822-97d6-4580-83b6-aec40f3f7964" }, "proceedings": { "title": "International Symposium on Multidisciplinary Studies and Innovative Technologies", "series_title": "Setsci conference indexing system", "publisher": "SET Technology", "isbn": "978-605-81988-1-4", "eisbn": null, "issn": "2618-6446", "eissn": null, "doi": null, "doi_prefix": null, "slug": "setsci-volume-1-2017-legacy-1", "public_id": "1ecf7302-3692-408b-b680-50001a9ab62c", "url": "https://www.set-science.com/p/setsci-volume-1-2017-legacy-1" }, "license": { "name": "CC BY 4.0", "url": "https://creativecommons.org/licenses/by/4.0/", "code": "CC-BY-4.0", "open_access": true }, "copyright": { "holder": "SET Technology", "year": "2017" }, "funding_statement": null, "funders": [], "references": [ { "order": 1, "raw": "M. Alizadeh-Sh, S. P. H. Marashi, and M. Pouranvari, “Resistance spot welding of AISI 430 ferritic stainless steel: phase transformations and mechanical properties,” Materials & Design., vol. 56, pp. 258-263, 2014.", "doi": null, "title": null, "authors": null, "source": null, "year": null, "volume": null, "pages": null }, { "order": 2, "raw": "M. Alizadeh-Sh, M. Pouranvari, and S. P. H. Marashi, “Welding metallurgy of stainless steels during resistance spot welding Part II–heat affected zone and mechanical performance,” Science and Technology of Welding and Joining., vol. 20.6, pp. 512-521, 2015.", "doi": null, "title": null, "authors": null, "source": null, "year": null, "volume": null, "pages": null }, { "order": 3, "raw": "J. VIŇÁŠ, Ľ. KAŠČÁK, and M. Abel, \"Analysis of Materials for Resistance Spot Welding Electrodes.\" Strojarstvo: časopis za teoriju i praksu u strojarstv.,, vol. 54.5, pp. 393-397, 2012.", "doi": null, "title": null, "authors": null, "source": null, "year": null, "volume": null, "pages": null }, { "order": 4, "raw": "P. Sathiya, S. Aravindan, and A. N. Haq, “Effect of friction welding parameters on mechanical and metallurgical properties of ferritic stainless steel,” The International Journal of Advanced Manufacturing Technology, vol. 31.11-12, pp. 1076-1082, 2007.", "doi": null, "title": null, "authors": null, "source": null, "year": null, "volume": null, "pages": null }, { "order": 5, "raw": "A K. Lakshminarayanan, K. Shanmugam, and V. Balasubramanian, “Effect of Autogenous Arc Welding Processes on Tensile and Impact Properties of Ferritic Stainless Steel Joints, Journal of Iron and Steel Research International., vol. 16(1), pp. 62-68, 2009.", "doi": null, "title": null, "authors": null, "source": null, "year": null, "volume": null, "pages": null }, { "order": 6, "raw": "L. Wang, C. Song, F. Sun, L. Li, and Q. Zhai, “Microstructure and Mechanical Properties of 12 wt.% Cr Ferritic Stainless Steel with Ti and Nb Dual Stabilization,” Materials and Design., vol. 30, pp. 49–56, 2009.", "doi": null, "title": null, "authors": null, "source": null, "year": null, "volume": null, "pages": null }, { "order": 7, "raw": "Ó. Martín, P. De Tiedra, M. López, M. San-Juan, C. García, F. Martín, and Y. Blanco, “Quality prediction of resistance spot welding joints of 304 austenitic stainless steel,” Materials & Design., vol. 30(1) pp. 68-77, 2009.", "doi": null, "title": null, "authors": null, "source": null, "year": null, "volume": null, "pages": null } ], "statements": { "acknowledgements": null, "conflict_of_interest": null, "data_availability": null, "ai_disclosure": null }, "credit": [], "history": { "published": "2017-12-08" } }