{
    "article_id": 279,
    "public_id": "92a81e4d-e4c2-4176-bde8-27002613b1f6",
    "internal_identifier": null,
    "source_identifier": "1:4",
    "status": "published",
    "type": "research_article",
    "title": "Lif Katkılı Kompozit Kiriş İle Çelik Kutu Profilin Darbe Deneyi Altındaki Davranışı",
    "title_secondary": null,
    "abstract": "İnsanoğlunun hayatını devam ettirebilmesi için, yaşamı boyunca her türlü yapıya ihtiyaç duymaktadır. Bu bazen çok katlı bir yapı, bazen ise köprü kolonu ya da kirişi olabilmektedir. Yapısal bir eleman olan kolon veya kiriş ister köprüde ister binada kullanılsın mutlaka üzerine gelme ihtimali olan yüklere karşı yeterli dayanıma sahip olması gerekmektedir. Bu yükler yapının kullanım amacına göre çeşitlilik göstermektedir. Köprü kolonlarında bir geminin ya da bir buz kütlesinin çarpması köprü kolonu için olası bir durum olmaktadır. Aynı zamanda bir gökdelene uçak çarpması günümüz şartlarında yapının maruz kalabileceği yük durumları arasında sayılabilir. Bu tür yüklemeler yapı elemanları farklı bile olsa aynı yükleme durumunda yani darbe etkisi olarak ifade edilebilmektedir. Bu tür yüklemeler karşısında elemanların istenilen performansta çalışması için bazı katkı maddeleri kullanılabilir. Fiber malzemesinin çok güçlü çekme mukavemetine sahip olması istenilen performans için aranan malzeme olmasını sağlamıştır. Bu çalışmada içi fiber katkılı beton ile doldurulmuş çelik kutu profil ile içi boş çelik kutu profilin, aynı yükseklikten, aynı vurma yükü karşısındaki deneysel davranışı incelenmiştir.",
    "language": "tr",
    "english_title": "Behavior of Fiber Reinforced Composite Beam and Steel Box Profile Under Impact Test",
    "english_abstract": "Human beings need various structures throughout their lives to sustain themselves. This can sometimes be a multi-story building, and sometimes a bridge column or beam. Whether used in a bridge or a building, a column or beam, as a structural element, must have sufficient resistance to the loads it may face. These loads vary depending on the intended use of the structure. For bridge columns, a collision with a ship or an ice floe is a possible scenario. Similarly, a skyscraper being struck by an airplane is another load situation a structure might face under current conditions. These types of loads, even if the structural elements are different, can be described as the same loading situation, i.e., impact effects. To ensure that the elements perform at the desired level under such loads, certain additives can be used. The very strong tensile strength of fiber material has made it the preferred material for achieving the desired performance. In this study, the experimental behavior of steel box profiles filled with fiber-reinforced concrete and hollow steel box profiles under the same impact load from the same height was investigated.",
    "doi": null,
    "doi_url": null,
    "resource_url": "https://www.set-science.com/a/92a81e4d-e4c2-4176-bde8-27002613b1f6",
    "pdf_url": "https://www.set-science.com/a/92a81e4d-e4c2-4176-bde8-27002613b1f6/pdf",
    "og_image": "https://www.set-science.com/assets/img/og-card-v2.png",
    "authors": [
        {
            "public_id": "207ee29a-faba-40fc-9a78-baf6702ec0e2",
            "given": "Elif",
            "family": "Ağcakoca",
            "full": "Elif Ağcakoca",
            "literal": null,
            "orcid": null,
            "orcid_url": null,
            "email": "elifd@sakarya.edu.tr",
            "corresponding": false,
            "sequence": "first",
            "affiliations": [
                {
                    "name": "Sakarya University",
                    "department": null,
                    "country": null,
                    "country_code": null,
                    "ror": null,
                    "ror_url": null
                }
            ]
        },
        {
            "public_id": "4be061ac-54f9-4d38-a056-f42fa052842b",
            "given": "Zeynep",
            "family": "Yaman",
            "full": "Zeynep Yaman",
            "literal": null,
            "orcid": null,
            "orcid_url": null,
            "email": "zdyaman@sakarya.edu.tr",
            "corresponding": true,
            "sequence": "additional",
            "affiliations": [
                {
                    "name": "Sakarya University",
                    "department": null,
                    "country": null,
                    "country_code": null,
                    "ror": null,
                    "ror_url": null
                }
            ]
        },
        {
            "public_id": "084af695-72fc-4347-8e3c-56b00bae601d",
            "given": "Yunus Emre",
            "family": "Yazıcı",
            "full": "Yunus Emre Yazıcı",
            "literal": null,
            "orcid": null,
            "orcid_url": null,
            "email": "yunus.yazici@ogr.sakarya.edu.tr",
            "corresponding": false,
            "sequence": "additional",
            "affiliations": [
                {
                    "name": "Sakarya University",
                    "department": null,
                    "country": null,
                    "country_code": null,
                    "ror": null,
                    "ror_url": null
                }
            ]
        }
    ],
    "keywords": [
        "Impact",
        "steel",
        "fiber"
    ],
    "translations": [
        {
            "language": "en",
            "title": "Behavior of Fiber Reinforced Composite Beam and Steel Box Profile Under Impact Test",
            "abstract": "Human beings need various structures throughout their lives to sustain themselves. This can sometimes be a multi-story building, and sometimes a bridge column or beam. Whether used in a bridge or a building, a column or beam, as a structural element, must have sufficient resistance to the loads it may face. These loads vary depending on the intended use of the structure. For bridge columns, a collision with a ship or an ice floe is a possible scenario. Similarly, a skyscraper being struck by an airplane is another load situation a structure might face under current conditions. These types of loads, even if the structural elements are different, can be described as the same loading situation, i.e., impact effects. To ensure that the elements perform at the desired level under such loads, certain additives can be used. The very strong tensile strength of fiber material has made it the preferred material for achieving the desired performance. In this study, the experimental behavior of steel box profiles filled with fiber-reinforced concrete and hollow steel box profiles under the same impact load from the same height was investigated.",
            "keywords": [
                "Impact",
                "steel",
                "fiber"
            ]
        }
    ],
    "subjects": [
        {
            "name": "Materials Chemistry",
            "label": "Natural Sciences › Chemistry › Materials Chemistry",
            "path": "natural-sciences/chemistry/materials-chemistry",
            "is_primary": true
        }
    ],
    "subject_names": [
        "Materials Chemistry"
    ],
    "published_date": "2017-12-08",
    "published_year": "2017",
    "received_date": null,
    "accepted_date": null,
    "volume": "1",
    "issue": null,
    "page_first": "15",
    "page_last": "17",
    "article_number": null,
    "conference": {
        "short_name": "ISMSIT2017",
        "full_title": "International Symposium on Multidisciplinary Studies and Innovative Technologies",
        "name": "International Symposium on Multidisciplinary Studies and Innovative Technologies",
        "acronym": "ISMSIT2017",
        "location": "Tokat, Türkiye",
        "start_date": "2017-12-02",
        "end_date": null,
        "public_id": "a63b4822-97d6-4580-83b6-aec40f3f7964"
    },
    "proceedings": {
        "title": "International Symposium on Multidisciplinary Studies and Innovative Technologies",
        "series_title": "Setsci conference indexing system",
        "publisher": "SET Technology",
        "isbn": "978-605-81988-1-4",
        "eisbn": null,
        "issn": "2618-6446",
        "eissn": null,
        "doi": null,
        "doi_prefix": null,
        "slug": "setsci-volume-1-2017-legacy-1",
        "public_id": "1ecf7302-3692-408b-b680-50001a9ab62c",
        "url": "https://www.set-science.com/p/setsci-volume-1-2017-legacy-1"
    },
    "license": {
        "name": "CC BY 4.0",
        "url": "https://creativecommons.org/licenses/by/4.0/",
        "code": "CC-BY-4.0",
        "open_access": true
    },
    "copyright": {
        "holder": "SET Technology",
        "year": "2017"
    },
    "funding_statement": null,
    "funders": [],
    "references": [
        {
            "order": 1,
            "raw": "Liew, J., Y., R., Sohel K., M., A., Koh, C., G., Impact tests on steel concretesteel sandwich beams with lightweight concrete core. Engineering Structures 31 (9), 2045-2059, 2008.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 2,
            "raw": "Gezer, O., Çelik ve kompozit borların çarpma davranışı ve koryucu yapıların etkileri. Gazi Üniversitesi, Fen Bilimleri Enstitüsü, İnşaat Mühendisliği Bölümü, Yüksek Lisans Tezi, 2012.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 3,
            "raw": "Fujikake, K, Li, B, Soeun, S., Impact response of reinforced concrete beam and its analytical evaluation. ASCE Journal of Structural Engineering 135(8): 938–950 2009.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 4,
            "raw": "Cotsovos, D., M., A Simplified approach for assessing the loadcarrying capacity of reinforced concrete beams under concentrated load applied at high rates, International Journal of Impact Engineering 37 (8), 907-917, 2010.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 5,
            "raw": "Cömert, M., Betonarme yapıların patlamalar karşısındaki performanslarının değerlendirilmesi, İstanbul Teknik Üniversitesi, Fen bilimler Enstitüsü, İnşaat Mühendisliği Bölümü, Yüksek lisans Tezi, 2010.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 6,
            "raw": "Özbaşaran, H., Deprem Esnasında çok katlı yapıların çarpışması etkisi, Eskişehir Osmangazi Üniversitesi, Fen Bilimleri Enstitüsü, İnşaat Mühendisliği Anabilim Dalı, Yapı Bilim Dalı, Yüksek Lisans Tezi, 2007",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        }
    ],
    "statements": {
        "acknowledgements": null,
        "conflict_of_interest": null,
        "data_availability": null,
        "ai_disclosure": null
    },
    "credit": [],
    "history": {
        "published": "2017-12-08"
    }
}