{
    "article_id": 697,
    "public_id": "9cd6b379-3236-4fc7-a44f-0a8f684fe9fb",
    "internal_identifier": null,
    "source_identifier": "39:62",
    "status": "published",
    "type": "research_article",
    "title": "The Investigation of Microstructure and Mechanical Properties of Austenitic Stainless Steel Joints Obtained by Different Welding Methods and Different Welding Parameters",
    "title_secondary": null,
    "abstract": "In this study, two different welding methods as TIG and TIG Pulse are used for joining 304 series stainless steel\r\nsheets having 2 mm thickness. In preparation of welded specimens were used three different welding currents ranging from 70\r\nA to 110 A by rise of 20 A.. The microstructure differences of the weld joints obtained by using two different welding methods\r\nand three different welding currents were investigated. Tensile specimens prepared according to standards were exposed to\r\ntensile testing at as speed of 20 mm/s. Fracture surfaces obtained from tensile test of welded specimens were examined and\r\ntheir mechanical properties were compared.  ",
    "language": "en",
    "english_title": null,
    "english_abstract": null,
    "doi": null,
    "doi_url": null,
    "resource_url": "https://www.set-science.com/a/9cd6b379-3236-4fc7-a44f-0a8f684fe9fb",
    "pdf_url": "https://www.set-science.com/a/9cd6b379-3236-4fc7-a44f-0a8f684fe9fb/pdf",
    "og_image": "https://www.set-science.com/assets/img/og-card-v2.png",
    "authors": [
        {
            "public_id": "7cb25b74-3838-44aa-9ecf-3737d6a6ce7f",
            "given": "Mehmet Ali",
            "family": "Bayrak",
            "full": "Mehmet Ali Bayrak",
            "literal": null,
            "orcid": null,
            "orcid_url": null,
            "email": "vonar@pau.edu.tr",
            "corresponding": true,
            "sequence": "first",
            "affiliations": [
                {
                    "name": "Pamukkale University",
                    "department": null,
                    "country": null,
                    "country_code": null,
                    "ror": null,
                    "ror_url": null
                }
            ]
        },
        {
            "public_id": "1099e307-4937-4306-b07b-db52ee7e1f1a",
            "given": "Volkan",
            "family": "Onar",
            "full": "Volkan Onar",
            "literal": null,
            "orcid": null,
            "orcid_url": null,
            "email": "vonar@pau.edu.tr",
            "corresponding": false,
            "sequence": "additional",
            "affiliations": [
                {
                    "name": "Pamukkale University",
                    "department": null,
                    "country": null,
                    "country_code": null,
                    "ror": null,
                    "ror_url": null
                }
            ]
        },
        {
            "public_id": "92c8d223-60ba-4b70-9800-6f663fa68d7a",
            "given": "Arzum",
            "family": "Işıtan",
            "full": "Arzum Işıtan",
            "literal": null,
            "orcid": null,
            "orcid_url": null,
            "email": "aisitan@pau.edu.tr",
            "corresponding": false,
            "sequence": "additional",
            "affiliations": [
                {
                    "name": "Pamukkale University",
                    "department": null,
                    "country": null,
                    "country_code": null,
                    "ror": null,
                    "ror_url": null
                }
            ]
        }
    ],
    "keywords": [
        "TIG Welding, TIG Pulse Welding, Austenitic Stainless Steel"
    ],
    "translations": [
        {
            "language": "en",
            "title": "The Investigation of Microstructure and Mechanical Properties of Austenitic Stainless Steel Joints Obtained by Different Welding Methods and Different Welding Parameters",
            "abstract": "In this study, two different welding methods as TIG and TIG Pulse are used for joining 304 series stainless steel\r\nsheets having 2 mm thickness. In preparation of welded specimens were used three different welding currents ranging from 70\r\nA to 110 A by rise of 20 A.. The microstructure differences of the weld joints obtained by using two different welding methods\r\nand three different welding currents were investigated. Tensile specimens prepared according to standards were exposed to\r\ntensile testing at as speed of 20 mm/s. Fracture surfaces obtained from tensile test of welded specimens were examined and\r\ntheir mechanical properties were compared.  \r\n",
            "keywords": [
                "TIG Welding, TIG Pulse Welding, Austenitic Stainless Steel"
            ]
        }
    ],
    "subjects": [],
    "subject_names": [],
    "published_date": "2018-12-31",
    "published_year": "2018",
    "received_date": null,
    "accepted_date": null,
    "volume": "3",
    "issue": null,
    "page_first": "324",
    "page_last": "327",
    "article_number": null,
    "conference": {
        "short_name": "ISAS2018-Winter",
        "full_title": "2nd International Symposium on Innovative Approaches in Scientific Studies",
        "name": "2nd International Symposium on Innovative Approaches in Scientific Studies",
        "acronym": "ISAS2018-Winter",
        "location": "Samsun, Türkiye",
        "start_date": "2018-11-30",
        "end_date": null,
        "public_id": "b8a703cc-09f7-4d5b-ae60-eb31a1050720"
    },
    "proceedings": {
        "title": "2nd International Symposium on Innovative Approaches in Scientific Studies",
        "series_title": "Setsci conference indexing system",
        "publisher": "SET Technology",
        "isbn": null,
        "eisbn": null,
        "issn": "2618-6446",
        "eissn": null,
        "doi": null,
        "doi_prefix": null,
        "slug": "setsci-volume-3-2018-legacy-39",
        "public_id": "641f522e-9cf0-4c89-be17-c6037f3d1bca",
        "url": "https://www.set-science.com/p/setsci-volume-3-2018-legacy-39"
    },
    "license": {
        "name": "CC BY 4.0",
        "url": "https://creativecommons.org/licenses/by/4.0/",
        "code": "CC-BY-4.0",
        "open_access": true
    },
    "copyright": {
        "holder": "SET Technology",
        "year": "2018"
    },
    "funding_statement": null,
    "funders": [],
    "references": [
        {
            "order": 1,
            "raw": "C. Odabaş, Paslanmaz Çelikler, As-Kaynak, www.askaynak.com.tr/contents/34/20110704120329_paslanmazcelikl er.pdf .",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 2,
            "raw": "Paslanmaz Çelik Çeşitleri, Ekip Mühendislik, http://www.ekipmuhendislik.com.tr/paslanmaz-celik-cesitleri.html.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 3,
            "raw": "J. Yan, M. Gao, X. Zeng, “Study on microstructure and mechanical properties of 304 stainless steel joints by TIG , laser and laser-TIG hybrid welding”, Optics and Lasers in Engineering, 48,512-517, 2010.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 4,
            "raw": "R. Nakhaei, A. Khodabandeh, H. Najafi, “Effect of Active on Weld Shape and Microstructure of Advanced A-TIG-Welded Stainless Steel”, Acta Metall.Sin. (Engl. Lett.), 29(3), 295-300 , 2016.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 5,
            "raw": "S. Kumar, A.S. Shahi, “Effect of heat input on the microstructure and mechanical properties of gas tungsten arc welded AISI 304 stainless steel joints”, Materials and Design , 32 , 3617-3623 , 2011.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 6,
            "raw": "K. Pal, S.K. Pal, “Effect of Pulse Parameters on Weld Quality in Pulsed Gas Metal Arc Welding: A Review”, ASM International , 20 , 918-931 , 2011.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 7,
            "raw": "G. Lothongkum, P. Chaumbai, P. Bhandhubanyong, “TIG pulse welding of 304L austenitic stainless steel in flat, vertical and overhead positions”, Journal of Materials Processing Technology , 89-90 , 410-414 , 1999.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 8,
            "raw": "C. Meric, O. Karabas, Y. Babayev, K. Demirkıran, “An investigation of the weld region of AISI 304, AISI 316L and AISI 431 stainless steels joined by GTAW”, Journal of Qafqaz University-Mechanical and Industrial Engineering, Volume1, Issue 1, 73-81 , 2013. (2002) The IEEE website. [Online]. Available: http://www.ieee.org/",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 9,
            "raw": "U. Eşme, M. Bayramoğlu, N. Geren, H. Serin, “TIG Kaynağında Kaynak Dayanımının Taguchi Metoduyla Optimizasyonu”, TİMAK- Tasarım İmalat Analiz Kongresi , Balıkesir , 2006.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 10,
            "raw": "T. Shinoda, Y. Ueno, I. Masumoto, “Effect of Pulsed Welding Current on Solidification Cracking in Austenitic Stainless Steel Welds”, Transactions of the Japan Welding Society , Vol. 21 , No. 1 ,1990.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 11,
            "raw": "Y. Miao, X. Xu, B. Wu, D. Han, Y. Zeng, T. Wang, “Effects of bypass current on arc characteristics and metal transfer behaviour during MIG-TIG double sided arc welding”, Journal of Materials Processing Technology , 224 , 40-48 , 2015",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 12,
            "raw": "B. Iscan, V. Onar, A. Işıtan, “Investigation of the Mechanical Properties of AISI 304 Austenitic Stainless Steel Joints Produced by TIG and MIG Welding Methods using 308L Filler Wire, Vol. 6, 4-12, 2017.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        }
    ],
    "statements": {
        "acknowledgements": null,
        "conflict_of_interest": null,
        "data_availability": null,
        "ai_disclosure": null
    },
    "credit": [],
    "history": {
        "published": "2018-12-31"
    }
}