{ "article_id": 985, "public_id": "b577d304-aeeb-4892-accc-82c5f608894e", "internal_identifier": null, "source_identifier": "40:45", "status": "published", "type": "research_article", "title": "Tasarım-üretim işbirliği sürecinde parametrik tasarım yazılımlarının sürece katkısına yönelik bir model önerisi: Revit-dynamo örneği", "title_secondary": null, "abstract": "Günümüzde parametrik tasarım yöntem ve yazılımları dünyada birçok mimarlık ofisi tarafından yaygın olarak tasarım süreçlerinde kullanılmaya başlanmıştır. Takip etmekte ve kendimizi güncel olmakla zorunlu olduğumuz bu ortamda, parametrik tasarım yazılımlarına hakim olmanın yanı sıra iyi bir kullanıcısı olmak kabul edilen bir gerçek haline gelmiştir. Parametrik tasarım metodları ile ilgili günümüzde binaların cephe sistemleri üzerine, form-geometri arayışları üzerine, arazi ile ilişkileri üzerine,ikonik bina örnekleri üzerine, ve kavramsal ilişkiler üzerine çalışmaların yapıldığı, yurt içi ve yurt dışı literatür taramalarında görülmektedir. Ancak, üretim-tasarım işbirliği içerisinde konsept ile başlayan ve resmi kurumlarda mimari onay süreci ile devam eden ve ardından üretim bölümü ile tamamlanan süreci inceleyen ara kesit çalışmasının eksikliği görülmektedir. İşveren talepleri, arsa ile ilgili sınırlamalar, yapı yaklaşma bilgileri, emsal sınırlamaları, tabii zemin ve yol ile projenin ilişkileri, kat yükseklikleri ve h max sınırlaması, net-brüt alan sınırlamları vs. gibi birçok tasarım-üretim sürecinde projeyi sınırlandırılan parametreler mevcuttur. Bim yazılımı olan Revit-dynamo iş birliği içerisinde parametrik tasarım metodları kullanılarak sürecin nasıl optimize edilip, verimli kullanılacağı ve bu sınırlayıcı parametrelerin yazılımlara nasıl entegre edilip geri dönüşler ve revizyonlar olması halinde kurulan sistemin nasıl eş zamanlı proje genelinde değiştiğinin tespitinin yapılıp analiz ediliği bir model önerisi hedeflenmiş ve sürecin nasıl verimli hale geldiği tespit edilmiştir.", "language": "tr", "english_title": "A proposed model for the contribution of parametric design software to the design-production collaboration process: The Revit-Dynamo example.", "english_abstract": "Nowadays, parametric design methods and software are used widely by design offices around the world. In this environment where we are obliged to follow and be up to date, being a good user as well as mastering parametric design software has become an accepted fact. It is seen that parametric design methods related to building facade systems, form-geometry searches, relations with the land, on iconic building samples and conceptual relations are conducted in domestic and overseas literature surveys. However, there is a lack of a cross-sectional study that starts with the concept of production-design cooperation and continues with the architectural approval process in the official institutions and then examining the completed process with the production department. Various parameters limit the project in the design and production process, for example employer demands, land limitations, building approach information, floor area ratio limitations, natural ground, relations between the road and project, the slab to slab height and maximum height limitation, rentable-gross area limitations etc. The aim of this model proposal is to determine how to optimize and use the parametric design methods in the Bim software Revit-dynamo, how to optimize and use the process and how to integrate these limiting parameters into software and to see how the system is changed simultaneously and how the process has become efficient.", "doi": null, "doi_url": null, "resource_url": "https://www.set-science.com/a/b577d304-aeeb-4892-accc-82c5f608894e", "pdf_url": "https://www.set-science.com/a/b577d304-aeeb-4892-accc-82c5f608894e/pdf", "og_image": "https://www.set-science.com/assets/img/og-card-v2.png", "authors": [ { "public_id": "173c9ee2-fbb2-4e7a-921c-bced07dd1e04", "given": "Yasin", "family": "Yıldız", "full": "Yasin Yıldız", "literal": null, "orcid": null, "orcid_url": null, "email": "yy-arc@hotmail.com", "corresponding": false, "sequence": "first", "affiliations": [ { "name": "Gazi Üniversitesi  ", "department": null, "country": null, "country_code": null, "ror": null, "ror_url": null } ] }, { "public_id": "698d015e-4676-49fe-ab27-f6f055e0dd1a", "given": "Arzu", "family": "Özen Yavuz", "full": "Arzu Özen Yavuz", "literal": null, "orcid": null, "orcid_url": null, "email": "arzuozen@gazi.edu.tr", "corresponding": true, "sequence": "additional", "affiliations": [ { "name": "Gazi Üniversitesi  ", "department": null, "country": null, "country_code": null, "ror": null, "ror_url": null } ] } ], "keywords": [], "translations": [ { "language": "en", "title": "A proposed model for the contribution of parametric design software to the design-production collaboration process: The Revit-Dynamo example.", "abstract": "Nowadays, parametric design methods and software are used widely by design offices around the world. In this environment where we are obliged to follow and be up to date, being a good user as well as mastering parametric design software has become an accepted fact. It is seen that parametric design methods related to building facade systems, form-geometry searches, relations with the land, on iconic building samples and conceptual relations are conducted in domestic and overseas literature surveys. However, there is a lack of a cross-sectional study that starts with the concept of production-design cooperation and continues with the architectural approval process in the official institutions and then examining the completed process with the production department. Various parameters limit the project in the design and production process, for example employer demands, land limitations, building approach information, floor area ratio limitations, natural ground, relations between the road and project, the slab to slab height and maximum height limitation, rentable-gross area limitations etc. The aim of this model proposal is to determine how to optimize and use the parametric design methods in the Bim software Revit-dynamo, how to optimize and use the process and how to integrate these limiting parameters into software and to see how the system is changed simultaneously and how the process has become efficient.", "keywords": [ "Parametrik, revit, dynamo, algoritmik tasarım, tasarım verisi" ] } ], "subjects": [], "subject_names": [], "published_date": "2019-08-19", "published_year": "2019", "received_date": null, "accepted_date": null, "volume": "7", "issue": null, "page_first": "366", "page_last": "371", "article_number": null, "conference": { "short_name": "ISAS2019-FDAS", "full_title": "3rd International Symposium on Innovative Approaches in Scientific Studies (Fine Arts, Design and Architecture)", "name": "3rd International Symposium on Innovative Approaches in Scientific Studies (Fine Arts, Design and Architecture)", "acronym": "ISAS2019-FDAS", "location": "Ankara, Türkiye", "start_date": "2019-04-19", "end_date": null, "public_id": "46e1894e-d8c3-4497-a0af-fc65583fe657" }, "proceedings": { "title": "3rd International Symposium on Innovative Approaches in Scientific Studies (Fine Arts, Design and Architecture)", "series_title": null, "publisher": "SET Technology", "isbn": null, "eisbn": null, "issn": null, "eissn": null, "doi": null, "doi_prefix": null, "slug": "setsci-volume-7-2019-legacy-40", "public_id": "85fb66d3-5b5c-4726-872a-f16f1128c7ca", "url": "https://www.set-science.com/p/setsci-volume-7-2019-legacy-40" }, "license": { "name": "CC BY 4.0", "url": "https://creativecommons.org/licenses/by/4.0/", "code": "CC-BY-4.0", "open_access": true }, "copyright": { "holder": "SET Technology", "year": "2019" }, "funding_statement": null, "funders": [], "references": [ { "order": 1, "raw": "Leach N., 2009. Swarm Urbanism. Architectural Design, Vol 79, No 4.", "doi": null, "title": null, "authors": null, "source": null, "year": null, "volume": null, "pages": null }, { "order": 2, "raw": "Senagala M., 2003. Time-like Architectures: The Emergence of Postspatial Parametric Worlds. alındığı tarih 15.12.2018.", "doi": null, "title": null, "authors": null, "source": null, "year": null, "volume": null, "pages": null }, { "order": 3, "raw": "Burry M., Murray Z., 1997. Computer Aided Architectural Design Using Parametric Variation and Associative Geometry, 15th eCAADe Conference Proceedings.", "doi": null, "title": null, "authors": null, "source": null, "year": null, "volume": null, "pages": null }, { "order": 4, "raw": "Archer, B., “Systematic Method for Designers”, Developments in Design Methodology” , Cross, N., John Wiley & Sons Ltd., Chichester, England, 57-82 (1984).Leach N., 2009. Swarm Urbanism. Architectural Design, Vol 79, No 4.", "doi": null, "title": null, "authors": null, "source": null, "year": null, "volume": null, "pages": null }, { "order": 5, "raw": "Url-1 https://autodesk.typepad.com/bimtoolbox/2016/06/lift-rangecapacity-in-revit-with-dynamo-use-case-by-mt-h%C3%B8jgaard.html", "doi": null, "title": null, "authors": null, "source": null, "year": null, "volume": null, "pages": null }, { "order": 6, "raw": "Ömer Faruk Taş, Yapı Yaklaşma Sınırı ile İlgili Dynamo Çalışma Modeli (2019)", "doi": null, "title": null, "authors": null, "source": null, "year": null, "volume": null, "pages": null } ], "statements": { "acknowledgements": null, "conflict_of_interest": null, "data_availability": null, "ai_disclosure": null }, "credit": [], "history": { "published": "2019-08-19" } }