{
    "article_id": 309,
    "public_id": "b5f04b1a-4953-4116-b384-9619b4a99c7f",
    "internal_identifier": null,
    "source_identifier": "1:34",
    "status": "published",
    "type": "research_article",
    "title": "Fabrication and Characterization of Ceramic Reinforced Aluminum Matrix Composites by Powder Metallurgy Method",
    "title_secondary": null,
    "abstract": "Aluminum based metal matrix composites are frequently used in automotive, aircraft, space, automotive, agricultural and building industries due to their easy shaping, good heat and electrical conductivity, low density, high strength and toughness. In these composite structures, graphene has begun to use as a reinforcement element since 2008. In this study, graphene reinforced aluminum composites with various graphene addition (0.1wt.%, 0.3wt.%, 0.5wt.%) were fabricated by powder metallurgy method. Vickers hardness, experimental density and wear behavior of fabricated composites were investigated. The best density and hardness value were obtained at 0.1wt.% graphene reinforcement. It was determined that the friction coefficient between the fabricated composites and stainless steel decreased with graphene addition. The results show that graphene is a good solid lubricant.  ",
    "language": "en",
    "english_title": null,
    "english_abstract": null,
    "doi": null,
    "doi_url": null,
    "resource_url": "https://www.set-science.com/a/b5f04b1a-4953-4116-b384-9619b4a99c7f",
    "pdf_url": "https://www.set-science.com/a/b5f04b1a-4953-4116-b384-9619b4a99c7f/pdf",
    "og_image": "https://www.set-science.com/assets/img/og-card-v2.png",
    "authors": [
        {
            "public_id": "9a8e5b67-99b4-4f0f-9e29-4bbfbd9a0d66",
            "given": "Mahmut Can",
            "family": "Şenel",
            "full": "Mahmut Can Şenel",
            "literal": null,
            "orcid": null,
            "orcid_url": null,
            "email": "mahmutcan.senel@omu.edu.tr",
            "corresponding": true,
            "sequence": "first",
            "affiliations": [
                {
                    "name": "Ondokuz Mayıs University",
                    "department": null,
                    "country": null,
                    "country_code": null,
                    "ror": null,
                    "ror_url": null
                }
            ]
        },
        {
            "public_id": "3919efb5-6b8d-40da-bbfd-b7e56be9aaf0",
            "given": "Mevlüt",
            "family": "Gürbüz",
            "full": "Mevlüt Gürbüz",
            "literal": null,
            "orcid": null,
            "orcid_url": null,
            "email": "mgurbuz@omu.edu.tr",
            "corresponding": false,
            "sequence": "additional",
            "affiliations": [
                {
                    "name": "Ondokuz Mayıs University",
                    "department": null,
                    "country": null,
                    "country_code": null,
                    "ror": null,
                    "ror_url": null
                }
            ]
        },
        {
            "public_id": "f3be9c6b-e386-45a3-8060-30f05eb51782",
            "given": "Erdem",
            "family": "Koç",
            "full": "Erdem Koç",
            "literal": null,
            "orcid": null,
            "orcid_url": null,
            "email": "erdemkoc@omu.edu.tr",
            "corresponding": false,
            "sequence": "additional",
            "affiliations": [
                {
                    "name": "Ondokuz Mayıs University",
                    "department": null,
                    "country": null,
                    "country_code": null,
                    "ror": null,
                    "ror_url": null
                }
            ]
        }
    ],
    "keywords": [
        "Aluminum, graphene, wear, powder metallurgy, microstructure"
    ],
    "translations": [
        {
            "language": "en",
            "title": "Fabrication and Characterization of Ceramic Reinforced Aluminum Matrix Composites by Powder Metallurgy Method",
            "abstract": "Aluminum based metal matrix composites are frequently used in automotive, aircraft, space, automotive, agricultural and building industries due to their easy shaping, good heat and electrical conductivity, low density, high strength and toughness. In these composite structures, graphene has begun to use as a reinforcement element since 2008. In this study, graphene reinforced aluminum composites with various graphene addition (0.1wt.%, 0.3wt.%, 0.5wt.%) were fabricated by powder metallurgy method. Vickers hardness, experimental density and wear behavior of fabricated composites were investigated. The best density and hardness value were obtained at 0.1wt.% graphene reinforcement. It was determined that the friction coefficient between the fabricated composites and stainless steel decreased with graphene addition. The results show that graphene is a good solid lubricant.  \r\n",
            "keywords": [
                "Aluminum, graphene, wear, powder metallurgy, microstructure"
            ]
        }
    ],
    "subjects": [],
    "subject_names": [],
    "published_date": "2017-12-08",
    "published_year": "2017",
    "received_date": null,
    "accepted_date": null,
    "volume": "1",
    "issue": null,
    "page_first": "148",
    "page_last": "152",
    "article_number": null,
    "conference": {
        "short_name": "ISMSIT2017",
        "full_title": "International Symposium on Multidisciplinary Studies and Innovative Technologies",
        "name": "International Symposium on Multidisciplinary Studies and Innovative Technologies",
        "acronym": "ISMSIT2017",
        "location": "Tokat, Türkiye",
        "start_date": "2017-12-02",
        "end_date": null,
        "public_id": "a63b4822-97d6-4580-83b6-aec40f3f7964"
    },
    "proceedings": {
        "title": "International Symposium on Multidisciplinary Studies and Innovative Technologies",
        "series_title": "Setsci conference indexing system",
        "publisher": "SET Technology",
        "isbn": "978-605-81988-1-4",
        "eisbn": null,
        "issn": "2618-6446",
        "eissn": null,
        "doi": null,
        "doi_prefix": null,
        "slug": "setsci-volume-1-2017-legacy-1",
        "public_id": "1ecf7302-3692-408b-b680-50001a9ab62c",
        "url": "https://www.set-science.com/p/setsci-volume-1-2017-legacy-1"
    },
    "license": {
        "name": "CC BY 4.0",
        "url": "https://creativecommons.org/licenses/by/4.0/",
        "code": "CC-BY-4.0",
        "open_access": true
    },
    "copyright": {
        "holder": "SET Technology",
        "year": "2017"
    },
    "funding_statement": null,
    "funders": [],
    "references": [
        {
            "order": 1,
            "raw": "M.C. Şenel, M. Gürbüz, E. Koç, “Grafen takviyeli alüminyum matrisli yeni nesil kompozitler,” Mühendis ve Makina Dergisi, cilt.56, sayı.669, s.36-47, Ekim 2015.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 2,
            "raw": "M. Pul, “Al matrisli MgO takviyeli kompozitlerin infiltrasyon yöntemi ile üretilmesi ve işlenebilirliğinin değerlendirilmesi,” Doktora tezi, Gazi Üniversitesi Fen Bilimleri Enstitüsü, Ankara, 2010.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 3,
            "raw": "Y. Şahin, Kompozit Malzemelere Giriş, Seçkin Yayınevi, 2. Baskı, Ankara, 2006.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 4,
            "raw": "M. Erdoğan, “Çelik takviyeli alüminyum kompozit üretimi ve mekanik özelliklerinin deneysel incelenmesi,” Yüksek Lisans Tezi, Dumlupınar Üniversitesi Fen Bilimleri Enstitüsü, Kütahya, 2005.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 5,
            "raw": "S. C. Tjong, “Recent progress in the development and properties of novel metal matrix nanocomposites reinforced with carbon nanotubes and graphene nanosheets,” Materials Science and Engineering, vol.74, no.10, p.281–350. 2013.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 6,
            "raw": "A. K. Geim, K. S. Novoselov, “The rise of graphene”, Nature Materials, vol.6, p.183–191, 2007.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 7,
            "raw": "(2013), TOBB web site. [Online]. Available: https://www.tobb.org.tr/ Documents/yayinlar/2014/Demir%20ve%20Demir%20D%C4%B1% C5%9F%C4%B1%20Rapor%20web.pdf.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 8,
            "raw": "(2015), Alcoa website. [Online]. Available: http://www.alcoa.com/ sustainability/en/info_page/products_design_lifecycle.asp.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 9,
            "raw": "E. P. Randviir, D. A. C. Brownson, C. E. Banks, “A decade of graphene research: production, applications and outlook,” Materials Today, vol.17, no.9, pp.426-432, 2014.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 10,
            "raw": "N. Savage, “Materials science:super carbon”, Nature, vol. 482, pp.30- 31, 2012.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 11,
            "raw": "V. Singh, D. Joung, L. Zhai, S. Das, S. I. Khondaker, “Graphene based materials: past, present and future,” Progress in Materials Science, vol. 56, no. 8, pp. 1178–1271, 2012.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 12,
            "raw": "J. Adams, D. Pendlebury, Global Research Report Materials Science and Technology, Thomsons Reuters, 2011.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 13,
            "raw": "H.G.P. Kumar, M. A. Xavior, “Graphene reinforced metal matrix composite (GRMMC): a review”, Procedia Engineering, vol. 97, pp.1033-1040, 2014.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 14,
            "raw": "J. Wang, Z. Li, G. Fan, H. Pan, Z. Chen, D. Zhang, “Reinforcement with graphene nanosheets in aluminum matrix composites,” Scripta Materialia, vol. 66, pp. 594–597, 2012.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 15,
            "raw": "J. L. Li, Y. C. Xiong, X. D. Wang, S. J. Yan, C. Yang, W.W. He, J.Z. Chen, S. Q. Wang, “Microstructure and tensile properties of bulk nanostructured aluminum/graphene composites prepared via cryomilling,” Materials Science&Engineering A, vol. 626, pp. 400-405, 2015.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 16,
            "raw": "S. Aswin, S. Varghese, “Tribology study of graphene-aluminum nanocomposites,” Proceedings of 10th IRF International Conference, 2014, p. 11-15.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 17,
            "raw": "M. Tabandeh-Khorshid, E. Omrani, P. L. Menezes, P. K. Rohatgi, “Tribological performance of self-lubricating aluminum matrix nanocomposites: role of graphene nanoplatelets,” Engineering Science and Technology an International Journal, vol.19, pp. 463-469, 2016.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        }
    ],
    "statements": {
        "acknowledgements": null,
        "conflict_of_interest": null,
        "data_availability": null,
        "ai_disclosure": null
    },
    "credit": [],
    "history": {
        "published": "2017-12-08"
    }
}