{ "article_id": 1114, "public_id": "c0eabddb-20d6-4df7-b3de-b4ce49d72a16", "internal_identifier": null, "source_identifier": "42:119", "status": "published", "type": "research_article", "title": "GERİ DÖNÜŞÜM AGREGALRINDAN ÜRETİLEN ATIK TENEKE KATKILI BETONLARIN MEKANİK ÖZELLİKLERİNİN ARAŞTIRILMASI", "title_secondary": null, "abstract": "Bu çalışmada, beton bileşenleri içerisinde en büyük paya sahip doğal kaynak olan agregaların geri kazanılarak beton\r\nüretiminde, maksimum düzeyde yeniden kullanılması hedeflenmiştir. Geri dönüşüm agregaların beton üretiminde\r\nkullanılabilirliğinin araştırıldığı bu çalışmada doğal agrega ve geri dönüşüm agregalar %100 doğal agregalı, ince agregası %100\r\ngeri dönüşüm, iri agregası %100 geri dönüşüm ve %100 geri dönüşüm agregalı oranlar şeklinde beton serileri üretilmiştir.\r\nBetonun fiziksel ve mekanik özelliklerini iyileştirmek amacı ile mineral katkı olarak silis dumanı %10 oranında çimento ile ilave\r\nedilmiştir. Dökülen beton numuneler 7., 28. ve 90. günlerde fiziksel ve mekanik deneyler yapılmıştır. Karışımların su/çimento\r\noranı 0,50 olup hedef dayanımı C30/37 betonu olarak üretilmiştir. Beton üretiminden önce hazırlanan agregalarda birim ağırlık,\r\nözgül ağırlık, su emme, granülometri ve Los Angeles aşınma deneyleri, taze betonda slump (çökme) ve sertleşmiş betonda birim\r\nağırlık ve basınç dayanımı deneyleri araştırılmıştır. Bu çalışmada ayrıca atık teneke ambalajları beton ile karıştırılarak betonun\r\nmekanik özelliklerine etkisi araştırılmıştır. Atık teneke ambalajları boy/en oranı ", "language": "tr", "english_title": "INVESTIGATION OF THE MECHANICAL PROPERTIES OF WASTE TIN ADDITIVE CONCRETE PRODUCED BY RECYCLING AGGREGATES", "english_abstract": "In this study, it is aimed to reuse the aggregates, which are the natural resources which have a large share in the concrete components, in the production of concrete, at maximum level. In this study which investigated the usability of recycled aggregates in concrete production, natural aggregate and recycled aggregates were produced as 100% natural aggregate, fine aggregate 100% recycled, coarse aggregate 100% recycled and 100% recycled aggregate ratios as concrete series. 10% silica fume of cement weight was used as mineral additive and the water/cement ratio of mixtures is 0.50 and target strength is produced as C30/37 concrete. Physical and mechanical tests were carried out on the 7th, 28th and 90th days of concrete samples. Unit weight, specific gravity, water absorption, granulometry and Los Angeles abrasion tests in aggregates, slump in fresh concrete, unit weight and compressive strength tests in hardened concrete were investigated. Also used length/width ratio 𝑙∕w=70/5𝑚𝑚 and 40𝑘𝑔∕𝑚3 of waste tin packages and the effect on the concrete was investigated. As a result, it was revealed that the recovered aggregates have a higher water absorption rate, and therefore they can be used in the production of concrete at a certain rate rather than completely recovered aggregate.", "doi": null, "doi_url": null, "resource_url": "https://www.set-science.com/a/c0eabddb-20d6-4df7-b3de-b4ce49d72a16", "pdf_url": "https://www.set-science.com/a/c0eabddb-20d6-4df7-b3de-b4ce49d72a16/pdf", "og_image": "https://www.set-science.com/assets/img/og-card-v2.png", "authors": [ { "public_id": "1694f0db-7dc6-4c79-813e-848e7e6d84ae", "given": "Mohammd Hosaın   ", "family": "AMINI", "full": "Mohammd Hosaın    AMINI", "literal": null, "orcid": null, "orcid_url": null, "email": "eng.h.amini@gmail.com", "corresponding": true, "sequence": "first", "affiliations": [ { "name": "Konya Technical University  ", "department": null, "country": null, "country_code": null, "ror": null, "ror_url": null } ] }, { "public_id": "21086084-2b3a-4021-977d-1836cf44114d", "given": "Mehmet   ", "family": "KAMANLI", "full": "Mehmet    KAMANLI", "literal": null, "orcid": null, "orcid_url": null, "email": "eng.h.amini@gmail.com", "corresponding": false, "sequence": "additional", "affiliations": [ { "name": "Konya Technical University  ", "department": null, "country": null, "country_code": null, "ror": null, "ror_url": null } ] }, { "public_id": "f86b4c42-aaac-493b-86ff-1f5eee8ff092", "given": "Alptuğ   ", "family": "ÜNAL", "full": "Alptuğ    ÜNAL", "literal": null, "orcid": null, "orcid_url": null, "email": "eng.h.amini@gmail.com", "corresponding": false, "sequence": "additional", "affiliations": [ { "name": "Konya Technical University  ", "department": null, "country": null, "country_code": null, "ror": null, "ror_url": null } ] } ], "keywords": [], "translations": [ { "language": "en", "title": "INVESTIGATION OF THE MECHANICAL PROPERTIES OF WASTE TIN ADDITIVE CONCRETE PRODUCED BY RECYCLING AGGREGATES", "abstract": "In this study, it is aimed to reuse the aggregates, which are the natural resources which have a large share in the concrete components, in the production of concrete, at maximum level. In this study which investigated the usability of recycled aggregates in concrete production, natural aggregate and recycled aggregates were produced as 100% natural aggregate, fine aggregate 100% recycled, coarse aggregate 100% recycled and 100% recycled aggregate ratios as concrete series. 10% silica fume of cement weight was used as mineral additive and the water/cement ratio of mixtures is 0.50 and target strength is produced as C30/37 concrete. Physical and mechanical tests were carried out on the 7th, 28th and 90th days of concrete samples. Unit weight, specific gravity, water absorption, granulometry and Los Angeles abrasion tests in aggregates, slump in fresh concrete, unit weight and compressive strength tests in hardened concrete were investigated. Also used length/width ratio 𝑙∕w=70/5𝑚𝑚 and 40𝑘𝑔∕𝑚3 of waste tin packages and the effect on the concrete was investigated. As a result, it was revealed that the recovered aggregates have a higher water absorption rate, and therefore they can be used in the production of concrete at a certain rate rather than completely recovered aggregate.", "keywords": [ "Geri Dönüşüm, Beton, kullanılabilirlik, sürdürülebilirlik, mekanik özellikler" ] } ], "subjects": [], "subject_names": [], "published_date": "2019-06-01", "published_year": "2019", "received_date": null, "accepted_date": null, "volume": "4", "issue": null, "page_first": "615", "page_last": "618", "article_number": null, "conference": { "short_name": "ISAS2019-ENS", "full_title": "3rd International Symposium on Innovative Approaches in Scientific Studies (Engineering and Natural Sciences)", "name": "3rd International Symposium on Innovative Approaches in Scientific Studies (Engineering and Natural Sciences)", "acronym": "ISAS2019-ENS", "location": "Ankara, Türkiye", "start_date": "2019-04-19", "end_date": null, "public_id": "ed3b36e9-38cf-4aeb-a135-833c969cc89f" }, "proceedings": { "title": "3rd International Symposium on Innovative Approaches in Scientific Studies (Engineering and Natural Sciences)", "series_title": "Setsci conference indexing system", "publisher": "SET Technology", "isbn": null, "eisbn": null, "issn": "2618-6446", "eissn": null, "doi": null, "doi_prefix": null, "slug": "setsci-volume-4-2019-legacy-42", "public_id": "24d215ef-a545-4351-9725-6e9bdb167b3c", "url": "https://www.set-science.com/p/setsci-volume-4-2019-legacy-42" }, "license": { "name": "CC BY 4.0", "url": "https://creativecommons.org/licenses/by/4.0/", "code": "CC-BY-4.0", "open_access": true }, "copyright": { "holder": "SET Technology", "year": "2019" }, "funding_statement": null, "funders": [], "references": [ { "order": 1, "raw": "N. D. Oikonomou, “Recycled concrete aggregates,” Cement and concrete composites, vol. 27, no. 2, pp. 315-318, 2005.", "doi": null, "title": null, "authors": null, "source": null, "year": null, "volume": null, "pages": null }, { "order": 2, "raw": "B. Erdal, “Geri kazanılmış agrega ile üretilen polipropilen lif katkılı betonların özellikleri,” Yıldız Teknik Üniversitesi, 2011.", "doi": null, "title": null, "authors": null, "source": null, "year": null, "volume": null, "pages": null }, { "order": 3, "raw": "A. Köken, M. A. Köroğlu, and F. Yonar, “Atık betonların beton agregası olarak kullanılabilirliği,” 2008.", "doi": null, "title": null, "authors": null, "source": null, "year": null, "volume": null, "pages": null }, { "order": 4, "raw": "Ö. G. C. Demirel, A. G. K. TOKLU, O. ŞiMŞEK et al., “Geri Dönüşüm Agregasının Beton Üretiminde Kullanılabilirliği Ve Sürdürülebilirlik Açısından Değerlenirilmesi,” 2015.", "doi": null, "title": null, "authors": null, "source": null, "year": null, "volume": null, "pages": null }, { "order": 5, "raw": "İ. KILIÇ, and A. KADAYIFÇI, “Geri Dönüştürülmüş Atık Betonlarda Silis Dumanının Etkileri,” Trakya Üniversitesi Fen Bilimleri Dergisi, vol. 8, no. 2, pp. 115-121, 2007.", "doi": null, "title": null, "authors": null, "source": null, "year": null, "volume": null, "pages": null }, { "order": 6, "raw": "H. Dilbas, and Ö. Çakır, “Geri Kazanılmış Agregaların Mekanik Öğütme Yöntemi ile İyileştirilmesi,” HAZIR BETON, pp. 80-86, 2018.", "doi": null, "title": null, "authors": null, "source": null, "year": null, "volume": null, "pages": null }, { "order": 7, "raw": "S. S. TOPGÜL, “Öğütülmüş Granüle Yüksek Fırın Cürufunun Geri Kazanilmiş Agregali Betonlarin Özelliklerine Etkisi,” Yüksek Lisans Tezi, yıldız teknik üniversitesi, istanbul, 2016.", "doi": null, "title": null, "authors": null, "source": null, "year": null, "volume": null, "pages": null }, { "order": 8, "raw": "M. Çakıroğlu, S. Kasap, and N. Keskin, “Betona Atık Teneke Ambalajlarının İlave Edilmesinin Basınç Dayanımına Etkisinin İncelenmesi Üzerine Deneysel Bir Çalışma,” 2011.", "doi": null, "title": null, "authors": null, "source": null, "year": null, "volume": null, "pages": null }, { "order": 9, "raw": "T. S. TS500, “Betonarme Yapıların Hesap ve Yapım Kuralları,” Türk Standartları Enstitüsü, Ankara, 2000.", "doi": null, "title": null, "authors": null, "source": null, "year": null, "volume": null, "pages": null }, { "order": 10, "raw": "T.-Y. Tu, Y.-Y. Chen, and C.-L. Hwang, “Properties of HPC with recycled aggregates,” Cement and concrete research, vol. 36, no. 5, pp. 943-950, 2006.", "doi": null, "title": null, "authors": null, "source": null, "year": null, "volume": null, "pages": null }, { "order": 11, "raw": "C. Demirel, and O. Şimşek, “C30 sınıfı atık betonun geridönüşüm agregası olarak beton üretiminde kullanılabilirliği,” 2014.", "doi": null, "title": null, "authors": null, "source": null, "year": null, "volume": null, "pages": null } ], "statements": { "acknowledgements": null, "conflict_of_interest": null, "data_availability": null, "ai_disclosure": null }, "credit": [], "history": { "published": "2019-06-01" } }