{
    "article_id": 1072,
    "public_id": "df2d39a3-fe41-4c10-bc0c-9a29d9961899",
    "internal_identifier": null,
    "source_identifier": "42:77",
    "status": "published",
    "type": "research_article",
    "title": "FLORO POLİMER KAPLAMANIN BAKIR PLAKA ÜZERİNE UYGULANMASI VE AŞINMA ÜZERİNE ETKİSİNİN İNCELENMESİ",
    "title_secondary": null,
    "abstract": "Bu çalışmada, bakır bir plaka floro polimer esaslı malzeme ile kaplanarak, kaplama yüzeyinin hidrofobikliği ve aşınma miktarı incelenmiştir. Kaplamasız bakır plaka yüzeyinin hidrofilik, floro polimer esaslı malzeme ile kaplanan bakır plaka yüzeyinin ise hidrofobik özellik gösterdiği belirlenmiştir. Plakalara uygulanan aşınma testinde, kaplamasız bakır plakanın 4,2mg, floro polimer esaslı malzeme ile kaplanan bakır plakanın ise 1,2mg kütle kaybına uğradığı tespit edilmiştir. Aynı zamanda bakır plakanın özgül aşınma miktarının 5,4mm3/Nm, floro polimer esaslı malzeme ile kaplanan bakır plakanın özgül aşınma miktarının ise 1,5mm3/Nm olduğu tespit edilmiştir. Böylece bakır plakanın yüzeyinin floro polimer esaslı malzeme ile kaplanmasının aşınma\r\nmiktarını %72 oranında düşürdüğü belirlenmiştir.  ",
    "language": "tr",
    "english_title": "APPLICATION OF FLUOROPOLYMER COATING ON COPPER PLATE AND INVESTIGATION OF ITS EFFECT ON WEAR",
    "english_abstract": "In this study, a copper plate was coated with a fluoropolymer-based material, and the hydrophobicity and wear of the coated surface were investigated. It was determined that the uncoated copper plate surface was hydrophilic, while the copper plate surface coated with the fluoropolymer-based material exhibited hydrophobic properties. In the wear test applied to the plates, it was found that the uncoated copper plate experienced a mass loss of 4.2 mg, while the copper plate coated with the fluoropolymer-based material experienced a mass loss of 1.2 mg. At the same time, it was determined that the specific wear amount of the copper plate was 5.4 mm³/Nm, and the specific wear amount of the copper plate coated with the fluoropolymer-based material was 1.5 mm³/Nm. Thus, it was determined that coating the surface of the copper plate with a fluoropolymer-based material reduced the wear amount by 72%.",
    "doi": null,
    "doi_url": null,
    "resource_url": "https://www.set-science.com/a/df2d39a3-fe41-4c10-bc0c-9a29d9961899",
    "pdf_url": "https://www.set-science.com/a/df2d39a3-fe41-4c10-bc0c-9a29d9961899/pdf",
    "og_image": "https://www.set-science.com/assets/img/og-card-v2.png",
    "authors": [
        {
            "public_id": "fea8c6d0-1975-4a39-be8b-b578b186a37f",
            "given": "Mustafa ",
            "family": "PEHLİVAN  ",
            "full": "Mustafa  PEHLİVAN  ",
            "literal": null,
            "orcid": null,
            "orcid_url": null,
            "email": "mustafa.pehlivan@samsun.edu.tr",
            "corresponding": true,
            "sequence": "first",
            "affiliations": [
                {
                    "name": "Samsun Üniversitesi",
                    "department": null,
                    "country": null,
                    "country_code": null,
                    "ror": null,
                    "ror_url": null
                }
            ]
        },
        {
            "public_id": "49ed00ca-4fa7-42e5-a510-811a9251d727",
            "given": "Uğur ",
            "family": "KARAKURT  ",
            "full": "Uğur  KARAKURT  ",
            "literal": null,
            "orcid": null,
            "orcid_url": null,
            "email": "ugurkrkrt@gmail.com",
            "corresponding": false,
            "sequence": "additional",
            "affiliations": [
                {
                    "name": "Ondokuz Mayıs Üniversitesi  ",
                    "department": null,
                    "country": null,
                    "country_code": null,
                    "ror": null,
                    "ror_url": null
                }
            ]
        },
        {
            "public_id": "492804e5-7794-4ec0-8c88-b4f4fea0102b",
            "given": "Mustafa ",
            "family": "ÖZBEY  ",
            "full": "Mustafa  ÖZBEY  ",
            "literal": null,
            "orcid": null,
            "orcid_url": null,
            "email": "ugurkrkrt@gmail.com",
            "corresponding": false,
            "sequence": "additional",
            "affiliations": [
                {
                    "name": "Ondokuz Mayıs Üniversitesi  ",
                    "department": null,
                    "country": null,
                    "country_code": null,
                    "ror": null,
                    "ror_url": null
                }
            ]
        },
        {
            "public_id": "ce298947-e29d-46c6-bffa-f197e9a6ed12",
            "given": "Mevlüt ",
            "family": "GÜRBÜZ  ",
            "full": "Mevlüt  GÜRBÜZ  ",
            "literal": null,
            "orcid": null,
            "orcid_url": null,
            "email": "ugurkrkrt@gmail.com",
            "corresponding": false,
            "sequence": "additional",
            "affiliations": [
                {
                    "name": "Ondokuz Mayıs Üniversitesi  ",
                    "department": null,
                    "country": null,
                    "country_code": null,
                    "ror": null,
                    "ror_url": null
                }
            ]
        }
    ],
    "keywords": [
        "bakır plaka",
        "kaplama",
        "hidrofobik",
        "floro polimer",
        "aşınma dayanımı"
    ],
    "translations": [
        {
            "language": "en",
            "title": "APPLICATION OF FLUOROPOLYMER COATING ON COPPER PLATE AND INVESTIGATION OF ITS EFFECT ON WEAR",
            "abstract": "In this study, a copper plate was coated with a fluoropolymer-based material, and the hydrophobicity and wear of the coated surface were investigated. It was determined that the uncoated copper plate surface was hydrophilic, while the copper plate surface coated with the fluoropolymer-based material exhibited hydrophobic properties. In the wear test applied to the plates, it was found that the uncoated copper plate experienced a mass loss of 4.2 mg, while the copper plate coated with the fluoropolymer-based material experienced a mass loss of 1.2 mg. At the same time, it was determined that the specific wear amount of the copper plate was 5.4 mm³/Nm, and the specific wear amount of the copper plate coated with the fluoropolymer-based material was 1.5 mm³/Nm. Thus, it was determined that coating the surface of the copper plate with a fluoropolymer-based material reduced the wear amount by 72%.",
            "keywords": [
                "copper plate",
                "coating",
                "hydrophobic",
                "fluoropolymer",
                "wear resistance"
            ]
        }
    ],
    "subjects": [],
    "subject_names": [],
    "published_date": "2019-06-01",
    "published_year": "2019",
    "received_date": null,
    "accepted_date": null,
    "volume": "4",
    "issue": null,
    "page_first": "408",
    "page_last": "410",
    "article_number": null,
    "conference": {
        "short_name": "ISAS2019-ENS",
        "full_title": "3rd International Symposium on Innovative Approaches in Scientific Studies (Engineering and Natural Sciences)",
        "name": "3rd International Symposium on Innovative Approaches in Scientific Studies (Engineering and Natural Sciences)",
        "acronym": "ISAS2019-ENS",
        "location": "Ankara, Türkiye",
        "start_date": "2019-04-19",
        "end_date": null,
        "public_id": "ed3b36e9-38cf-4aeb-a135-833c969cc89f"
    },
    "proceedings": {
        "title": "3rd International Symposium on Innovative Approaches in Scientific Studies (Engineering and Natural Sciences)",
        "series_title": "Setsci conference indexing system",
        "publisher": "SET Technology",
        "isbn": null,
        "eisbn": null,
        "issn": "2618-6446",
        "eissn": null,
        "doi": null,
        "doi_prefix": null,
        "slug": "setsci-volume-4-2019-legacy-42",
        "public_id": "24d215ef-a545-4351-9725-6e9bdb167b3c",
        "url": "https://www.set-science.com/p/setsci-volume-4-2019-legacy-42"
    },
    "license": {
        "name": "CC BY 4.0",
        "url": "https://creativecommons.org/licenses/by/4.0/",
        "code": "CC-BY-4.0",
        "open_access": true
    },
    "copyright": {
        "holder": "SET Technology",
        "year": "2019"
    },
    "funding_statement": null,
    "funders": [],
    "references": [
        {
            "order": 1,
            "raw": "Beşe, A.V., Bakır Cüruflarından Metallerin Kazanılması, 2017",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 2,
            "raw": "URL http://www.mta.gov.tr/, Erişim tarihi 16.03.2019",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 3,
            "raw": "Koyun, T. ve Güven, Ş.Y., Galvanik Korozyon ve Alüminyum-Bakır Üzerine Deneysel Bir Çalışma, Mühendislik Bilimleri ve Tasarım Dergisi, 2017",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 4,
            "raw": "Zhang, P. ve Lv, F.Y., A review of the recent advances in superhydrophobic surfaces and the emerging energy-related applications, Energy, 2015",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 5,
            "raw": "Oberli L, Caruso D, Hall C, Fabretto M, Murphy PJ, Evans D., Condensation and freezing of droplets on superhydrophobic surfaces. Adv Colloid Interface Sci, 2014",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 6,
            "raw": "Koraman, E., Al-Fe-V-Si Alaşımlarının Yüksek Sıcaklık Aşınma Özelliklerinin İncelenmesi, İTÜ Yüksek Lisans Tezi, 2011",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 7,
            "raw": "Varol, T., Karadeniz Teknik Üniversitesi Mühendislik Fakültesi, Metalurji ve Malzeme Mühendisliği Bölümü Aşınma Deneyi Laboratuar Föyü, 2016",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        },
        {
            "order": 8,
            "raw": "Şenel, M.C., Gürbüz, M. ve Koç, E., Mechanical and Tribological Behaviours of Aluminium Matrix Composites Reinforced By Graphene Nanoplatelets, Materials Science and Technology, 2018",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        }
    ],
    "statements": {
        "acknowledgements": null,
        "conflict_of_interest": null,
        "data_availability": null,
        "ai_disclosure": null
    },
    "credit": [],
    "history": {
        "published": "2019-06-01"
    }
}