{ "article_id": 1127, "public_id": "ef450532-1532-4dd5-abae-a76ebe9fadca", "internal_identifier": null, "source_identifier": "42:132", "status": "published", "type": "research_article", "title": "The Effect of MWCNT Addition on Mechanical Properties of Epoxy Based Adhesives", "title_secondary": null, "abstract": "In this study, multi-walled carbon nanotubes (MWCNT) in different weight ratios effect on the mechanical\r\nproperties of modified epoxy based adhesive under an axial load was investigated. 0.25, 0.50, 0.75 and 1 % by weight ratio the\r\nMWCNT added epoxy adhesives were prepared. Tensile test specimens of MWCNT added epoxy adhesives were produced in\r\naccordance with ASTM D638-10 and the tensile tests under axial load were performed. The tensile strength, elastic modulus,\r\nand toughness of the modified epoxy adhesives were calculated. As a result of these tests, tensile strengths and deformation of\r\nthe samples were compared with reference (neat epoxy) samples and different proportions of MWCNT additive epoxy based\r\nadhesives. While the maximum strain of the epoxy adhesive is obtained as 0.061(mm/mm), it was obtained to 0.081(mm/mm)\r\nfor 0.25% MWCNT added modified epoxy-based adhesive. In addition, fractured surfaces of the adhesives were analyzed by\r\nscanning electron microscopy (SEM) and damage mechanisms were investigated. By increasing the amount of MWCNT by\r\nweight, the agglomeration regions have been seen and because of these agglomerations, it has been observed to decrease in the\r\nmechanical properties such as tensile strength, etc.  ", "language": "en", "english_title": null, "english_abstract": null, "doi": null, "doi_url": null, "resource_url": "https://www.set-science.com/a/ef450532-1532-4dd5-abae-a76ebe9fadca", "pdf_url": "https://www.set-science.com/a/ef450532-1532-4dd5-abae-a76ebe9fadca/pdf", "og_image": "https://www.set-science.com/assets/img/og-card-v2.png", "authors": [ { "public_id": "1d6ddc14-93ee-4521-b671-20a7b9d0578d", "given": "Necati   ", "family": "ATABERK", "full": "Necati    ATABERK", "literal": null, "orcid": null, "orcid_url": null, "email": "mekrem@erbakan.edu.tr", "corresponding": false, "sequence": "first", "affiliations": [ { "name": "Necmettin Erbakan University", "department": null, "country": null, "country_code": null, "ror": null, "ror_url": null } ] }, { "public_id": "c24d2176-08bc-4042-8d8f-e48e99b227a9", "given": "Mürsel   ", "family": "EKREM", "full": "Mürsel    EKREM", "literal": null, "orcid": null, "orcid_url": null, "email": "mekrem@erbakan.edu.tr", "corresponding": true, "sequence": "additional", "affiliations": [ { "name": "Necmettin Erbakan University", "department": null, "country": null, "country_code": null, "ror": null, "ror_url": null } ] }, { "public_id": "1613850e-4402-4c32-b0c7-bc9f3871a0f9", "given": "Yasin   ", "family": "ÖZDEMİR", "full": "Yasin    ÖZDEMİR", "literal": null, "orcid": null, "orcid_url": null, "email": "mekrem@erbakan.edu.tr", "corresponding": false, "sequence": "additional", "affiliations": [ { "name": "Necmettin Erbakan University", "department": null, "country": null, "country_code": null, "ror": null, "ror_url": null } ] } ], "keywords": [ "Tensile strength, SEM, Epoxy adhesives, MWCNT" ], "translations": [ { "language": "en", "title": "The Effect of MWCNT Addition on Mechanical Properties of Epoxy Based Adhesives", "abstract": "In this study, multi-walled carbon nanotubes (MWCNT) in different weight ratios effect on the mechanical\r\nproperties of modified epoxy based adhesive under an axial load was investigated. 0.25, 0.50, 0.75 and 1 % by weight ratio the\r\nMWCNT added epoxy adhesives were prepared. Tensile test specimens of MWCNT added epoxy adhesives were produced in\r\naccordance with ASTM D638-10 and the tensile tests under axial load were performed. The tensile strength, elastic modulus,\r\nand toughness of the modified epoxy adhesives were calculated. As a result of these tests, tensile strengths and deformation of\r\nthe samples were compared with reference (neat epoxy) samples and different proportions of MWCNT additive epoxy based\r\nadhesives. While the maximum strain of the epoxy adhesive is obtained as 0.061(mm/mm), it was obtained to 0.081(mm/mm)\r\nfor 0.25% MWCNT added modified epoxy-based adhesive. In addition, fractured surfaces of the adhesives were analyzed by\r\nscanning electron microscopy (SEM) and damage mechanisms were investigated. By increasing the amount of MWCNT by\r\nweight, the agglomeration regions have been seen and because of these agglomerations, it has been observed to decrease in the\r\nmechanical properties such as tensile strength, etc.  \r\n", "keywords": [ "Tensile strength, SEM, Epoxy adhesives, MWCNT" ] } ], "subjects": [], "subject_names": [], "published_date": "2019-06-01", "published_year": "2019", "received_date": null, "accepted_date": null, "volume": "4", "issue": null, "page_first": "672", "page_last": "675", "article_number": null, "conference": { "short_name": "ISAS2019-ENS", "full_title": "3rd International Symposium on Innovative Approaches in Scientific Studies (Engineering and Natural Sciences)", "name": "3rd International Symposium on Innovative Approaches in Scientific Studies (Engineering and Natural Sciences)", "acronym": "ISAS2019-ENS", "location": "Ankara, Türkiye", "start_date": "2019-04-19", "end_date": null, "public_id": "ed3b36e9-38cf-4aeb-a135-833c969cc89f" }, "proceedings": { "title": "3rd International Symposium on Innovative Approaches in Scientific Studies (Engineering and Natural Sciences)", "series_title": "Setsci conference indexing system", "publisher": "SET Technology", "isbn": null, "eisbn": null, "issn": "2618-6446", "eissn": null, "doi": null, "doi_prefix": null, "slug": "setsci-volume-4-2019-legacy-42", "public_id": "24d215ef-a545-4351-9725-6e9bdb167b3c", "url": "https://www.set-science.com/p/setsci-volume-4-2019-legacy-42" }, "license": { "name": "CC BY 4.0", "url": "https://creativecommons.org/licenses/by/4.0/", "code": "CC-BY-4.0", "open_access": true }, "copyright": { "holder": "SET Technology", "year": "2019" }, "funding_statement": null, "funders": [], "references": [ { "order": 1, "raw": "1. Kozma, L. and I. Olefjord, Basic processes of surface preparation and bond formation of adhesively joined aluminium. Materials Science and Technology, 1987. 3(10): p. 860-874.\r\n\r\n2. Lapique, F. and K. Redford, Curing effects on viscosity and mechanical properties of a commercial epoxy resin adhesive. International journal of adhesion and adhesives, 2002. 22(4): p.337-346.\r\n\r\n3. Shao, H. and R.J. Stewart, Biomimetic underwater adhesives with environmentally triggered setting mechanisms. Advanced materials, 2010. 22(6): p. 729-733.\r\n\r\n4. Coleman, J.N., et al., Improving the mechanical properties of single-walled carbon nanotube sheets by intercalation of polymeric adhesives. Applied Physics Letters, 2003. 82(11): p. 1682-1684.\r\n\r\n5. Banea, M. and L.F. da Silva, The effect of temperature on the mechanical properties of adhesives for the automotive industry. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2010. 224(2): p. 51-62.\r\n\r\n6. Ban, G., et al., Effect of nano-Cu addition on microstructure evolution of Sn0. 7Ag0. 5Cu-BiNi/Cu solder joint. Soldering & Surface Mount Technology, 2017. 29(2): p. 92-98.", "doi": null, "title": null, "authors": null, "source": null, "year": null, "volume": null, "pages": null } ], "statements": { "acknowledgements": null, "conflict_of_interest": null, "data_availability": null, "ai_disclosure": null }, "credit": [], "history": { "published": "2019-06-01" } }