{
    "article_id": 324,
    "public_id": "fba239ba-4321-4475-8c93-b4ad9295ab80",
    "internal_identifier": null,
    "source_identifier": "1:49",
    "status": "published",
    "type": "research_article",
    "title": "Investigation of Stress-Corrosion Behaviours in Dıfferent Environments of AA2024 Alloy",
    "title_secondary": null,
    "abstract": "Stress corrosion is a dangerous type of corrosion occuring as a result of effective with corrosive environment and stress of sensitive a material. Many metallic material may be exposed to stress corrosion damage depending on operating conditions. In order to determine the stress corrosion behavior is used SSRT (slow strain rate test) method. In this study, stress corrosion behaviours of AA2024 aluminum alloys were struggle to determine stress corrosion behaviours of different environments with comparison of stress corrosion indexes (I_SCC) and tensile strenghts obtained from air environment of same test sample and SSRT results that obtained from three different environment being pH= 2, 7 and 11 of solution 3.5% NaCl.",
    "language": "en",
    "english_title": null,
    "english_abstract": null,
    "doi": null,
    "doi_url": null,
    "resource_url": "https://www.set-science.com/a/fba239ba-4321-4475-8c93-b4ad9295ab80",
    "pdf_url": "https://www.set-science.com/a/fba239ba-4321-4475-8c93-b4ad9295ab80/pdf",
    "og_image": "https://www.set-science.com/assets/img/og-card-v2.png",
    "authors": [
        {
            "public_id": "b3a11ba8-5799-4883-a51c-7037821e5b15",
            "given": "Batuhan",
            "family": "Özakın",
            "full": "Batuhan Özakın",
            "literal": null,
            "orcid": null,
            "orcid_url": null,
            "email": "batuhan_ozakin@hotmail.com",
            "corresponding": true,
            "sequence": "first",
            "affiliations": [
                {
                    "name": "Ondokuz Mayıs University",
                    "department": null,
                    "country": null,
                    "country_code": null,
                    "ror": null,
                    "ror_url": null
                }
            ]
        },
        {
            "public_id": "60ccdc19-353d-4947-900b-43babfe2c1fb",
            "given": "Hikmet",
            "family": "Altun",
            "full": "Hikmet Altun",
            "literal": null,
            "orcid": null,
            "orcid_url": null,
            "email": "haltun@atauni.edu.tr",
            "corresponding": false,
            "sequence": "additional",
            "affiliations": [
                {
                    "name": "Atatürk University",
                    "department": null,
                    "country": null,
                    "country_code": null,
                    "ror": null,
                    "ror_url": null
                }
            ]
        }
    ],
    "keywords": [
        "Aluminum alloys, Stress corrosion, SSRT"
    ],
    "translations": [
        {
            "language": "en",
            "title": "Investigation of Stress-Corrosion Behaviours in Dıfferent Environments of AA2024 Alloy",
            "abstract": "Stress corrosion is a dangerous type of corrosion occuring as a result of effective with corrosive environment and stress of sensitive a material. Many metallic material may be exposed to stress corrosion damage depending on operating conditions. In order to determine the stress corrosion behavior is used SSRT (slow strain rate test) method. In this study, stress corrosion behaviours of AA2024 aluminum alloys were struggle to determine stress corrosion behaviours of different environments with comparison of stress corrosion indexes (I_SCC) and tensile strenghts obtained from air environment of same test sample and SSRT results that obtained from three different environment being pH= 2, 7 and 11 of solution 3.5% NaCl.",
            "keywords": [
                "Aluminum alloys, Stress corrosion, SSRT"
            ]
        }
    ],
    "subjects": [],
    "subject_names": [],
    "published_date": "2017-12-08",
    "published_year": "2017",
    "received_date": null,
    "accepted_date": null,
    "volume": "1",
    "issue": null,
    "page_first": "214",
    "page_last": "218",
    "article_number": null,
    "conference": {
        "short_name": "ISMSIT2017",
        "full_title": "International Symposium on Multidisciplinary Studies and Innovative Technologies",
        "name": "International Symposium on Multidisciplinary Studies and Innovative Technologies",
        "acronym": "ISMSIT2017",
        "location": "Tokat, Türkiye",
        "start_date": "2017-12-02",
        "end_date": null,
        "public_id": "a63b4822-97d6-4580-83b6-aec40f3f7964"
    },
    "proceedings": {
        "title": "International Symposium on Multidisciplinary Studies and Innovative Technologies",
        "series_title": "Setsci conference indexing system",
        "publisher": "SET Technology",
        "isbn": "978-605-81988-1-4",
        "eisbn": null,
        "issn": "2618-6446",
        "eissn": null,
        "doi": null,
        "doi_prefix": null,
        "slug": "setsci-volume-1-2017-legacy-1",
        "public_id": "1ecf7302-3692-408b-b680-50001a9ab62c",
        "url": "https://www.set-science.com/p/setsci-volume-1-2017-legacy-1"
    },
    "license": {
        "name": "CC BY 4.0",
        "url": "https://creativecommons.org/licenses/by/4.0/",
        "code": "CC-BY-4.0",
        "open_access": true
    },
    "copyright": {
        "holder": "SET Technology",
        "year": "2017"
    },
    "funding_statement": null,
    "funders": [],
    "references": [
        {
            "order": 1,
            "raw": "1. Sharma, M. M., Tomedi, J. D., Weigley, J. 2014. “Slow strain rate testing and stress corrosion cracking of ultrafine grained and coventional Al-Mg alloy,” Materials Science & Engineering, vol. 619, p. 35-46\r\n\r\n2. Dey, S., Chattoraj, I. 2016. “Interaction of strain rate and hydrogen input on the embrittlementof 7075 T6 aluminum alloy,” Materials Science & Engineering, vol. 661, p. 168-178\r\n\r\n3. Liu, Y., Sun, D., You, H., Chung, J. S. 2005. “Corrosion resistance properties of organic-inorganic hybrid coatings on 2024 aluminum alloy,” Applied Surface Science, vol. 246, p. 82-89\r\n\r\n4. Queiroz, F. M., Magnani, M., Costa, I., De Melo, H. G. 2008. “Investigation of the corrosion behaviour of AA2024-T3 in low concentrated chloride media,”\r\nCorrosion Science, vol. 50, p. 2646-2657\r\n\r\n5. Fadaee, H., Javidi, M. 2014. “Investigation on the corrosion behaviour and microstructure of 2024-T3 Al alloy treated via plasma electrolytic oxidation,” Journal of Alloys annd Compounds, vol. 604, p. 36-42\r\n\r\n6. Ghosh, K. S., Hilal M. D., Bose, S. 2013. “Corrosion behavior of 2024 Al-Cu-Mg alloy of various tempers,” Transactions of Nonferrous Metal Society of China, vol. 23, p. 3215-3227\r\n\r\n7. Contreras, A., Albiter, A., Salazar, M., Perez, R. 2005. “Slow strain rate corrosion and fracture characteristics of X-52 and X-70 pipeline steels,” Materials Science & Engineering, vol. 407, p. 45-52\r\n\r\n8. Ciu, X., Frankel, G. S. 2006. “Effects of compressive stress on localized corrosion in AA2024-T3,” Corrosion Science, vol. 48, p. 3309-3329 \r\n\r\n9. Luo, C., Zhou, X., Thompson, G. E., Hughes, A. E. 2012. “Observations of intergranular corrosion in AA2024-T351: The influence of grain stored energy,” Corrosion Science, vol. 61, p. 35-44\r\n\r\n10. Lee, H., Kim, Y., Jeong, Y., Kim, S. 2012. “Effects of testing variables on stress corrosion cracking susceptibility of Al 2024-T351,” Corrosion Science, vol.\r\n55, p. 10-19 \r\n\r\n11. De Tiedra, P., Martin, O. 2013. “Effect of welding on stress corrosion cracking behaviour of prior cold worked AISI 316L stainless steel studied by using the slow strain rate test,” Materials and Design, vol. 49, p. 103-109\r\n\r\n12. Bertini, L., Santus, C., Valentini, R., Lovicu G. 2007. “New high concentration-high temparature method for slow strain rate tensile tests,” Materials Letters, vol. 61, p. 2509-2513\r\n\r\n13. ASTM G 129-00: 2013. Standard Practice for Slow Strain Rate Testing to Evaluate the Susceptibility of Metallic Materials to Environmentally Assisted Cracking.",
            "doi": null,
            "title": null,
            "authors": null,
            "source": null,
            "year": null,
            "volume": null,
            "pages": null
        }
    ],
    "statements": {
        "acknowledgements": null,
        "conflict_of_interest": null,
        "data_availability": null,
        "ai_disclosure": null
    },
    "credit": [],
    "history": {
        "published": "2017-12-08"
    }
}