Search

The purpose of this study is to examine the software libraries and data sets used for Deep Learning architectures. Deep Learning brings a different perspective to the field of artificial intelligence. It has begun to be used an incredibly wide field in recent …

This paper describes a laboratory application for the forecasting the dielectric properties, using an artificial neural network embedded in a microprocessor. The dielectric permittivity and loss factor of the insulation material were determined as a function o…

In this paper, a structural-output is obtained to estimate 3D human pose using 3D human point cloud and monocular images. The Neural Network takes a human image and 3D pose as inputs and gives outputs a score value. Conditional Random Field (CRF) approach is u…

In this study, the accelerations caused by the diaphragm movements during respiration were monitored with a 3-axis accelerometer and the measured accelerations were recorded on an SD card. A measurement system for this purpose was developed. The moments in whi…

Building automation and control systems (BACs) allow plants in buildings to be controlled and managed, thus increasing the users' comfort and reducing the operation and maintenance costs. As far as the lighting services are concerned, control systems offer an …

Social networks are formed from interactions of peoples. Measuring the degree of those relationships requires interpreting connectivity of vertices and extracting information from it. Generally individuals form smaller sub-communities in those networks. Identi…

In this study, Al-12Si ingot alloy was melted in an electric resistance furnace and then poured into metal moulds through traditional casting method. Optimum machining conditions is aimed to determine by investigating the effects of cutting parameters on surfa…

Wireless Sensor Networks have many application fields including both industrial and military usages. They are used for monitoring temperature, distance, light, and motion in laboratories and/or application specific environments. This paper focuses on developin…

In this study, the experimental application of polymer electrolyte membrane fuel cell (PEM-FC) with dc-dc boost converter is realized for compact design of electric vehicle (eV). The PEM-FC is an electro-chemical device which combines hydrogen with oxygen to p…

In this study, we focused on to drive a compound DC motor with a Fuel-Cell and battery, which uses hydrogen as a fuel. A fuel cell can supply maximum 40V electric. In order to drive a DC motor, it needs 200Vdc. Therefore, a microcontroller controlled boost con…

Analysis of faults in synchronous generators are so important to protect the generators and the power systems. In this paper, double line-to-ground fault analysis in unloaded synchronous generator is presented. Apart from the similar studies in the literature,…

Exhaust gas distribution in street canyons is one of the important research subjects in urban air quality studies. Vehicle emissions are an important group of pollutants in urban areas. In this study, the dispersion of exhaust emissions from vehicles in canyon…

The aim of this study is to determine instantaneous irradiance and annual percentile sunlit time on the available rooftop floor area of Technical and Social Science Vocational School at Usak University by simulation using open source software. The building of …

The paper aims is to highlight the unavoidable changes in industrial society together with the basic elements of this transformation as well as to take the attention of the readers on the healthiest change process. Some actions which are considered to be very …

In this study, research on the determination of the technological level in the greenhouse mechanization in Southeastern Anatolia Region of Turkey has been carried out. The technological equipment and operating parameters that should be in a modern greenhouse h…

Taguchi’s robust parameter design focuses on reducing the system variability caused by the noise factors. The results obtained under unrealistic assumptions about the noises may mislead the practitioners when it comes to improving quality in robust design. For…

The Friction Stir Spot Welding (FSSW) method is a derivative of the Friction Stir Welding (FSW) process, which is a new welding process that recently has received considerable attention from the automotive and other industries. The studies of the different res…

Bu çalışmada balıklara doğal ve rahat bir yaşam alanı oluşturmak için akıllı bir akvaryum tasarımının yapılması amaçlanmıştır. Akvaryumun tasarımı için kullanılan elektronik bileşenlerin kontrolü Arduino mikrodenetleyicisi ile gerçekleştirilmiştir. Akvaryum iç…

Nowadays, competition in industrial production has come to the top with technological improvements. In this competitive environment, producers need better quality, faster and less costly production methods. So, the use of industrial robotic systems is becoming…

Researchers attention on the optimization methods to solve several applications increases recently by the advances in the technological field. The Artificial Bee Colony algorithm that has been quite popular during the recent years is firstly used in this study…