Search

Failure Mode and Effects Analysis (FMEA) is a technique that evaluates and classifies the errors/risks that may occur at different stages in the enterprises according to their types and prioritizes the errors. Because it is an easy and effective technique to a…

The collective system, which includes the automation system, data exchanges and production technologies is referred to as Industry 4.0. This system has two main components. The first is the new generation of software and hardware, and the second is the cyber p…

This study presents the investigation of thorium utilization in an ADS with Lead-Bismuth Eutectic (LBE) target. To effectively burn thorium, the ThO2 fuel rods cylindrically prepared, and cladded with SiC, are mixed with 233UO2 at volumetric ratio of 1%. These…

Bilgi iletişim teknolojileri (BİT) ile insan kaynakları yönetiminin (İKY) bütünleşmesiyle birlikte, yeni insan kaynakları tanımları ortaya çıkmış ve dijital insan kaynakları yönetim sistemi ihtiyacı doğmuştur. Dijital İnsan Kaynakları Yönetim Sistemi (HRMS), B…

This study includes the design of quadratic cascade DC/DC boost converter with PI controller. Two or more cascade boost converters have been used to increase system efficiency. Advantages of the proposed converter compared to the conventional boost converter a…

Fotovoltaik (FV) sistemler birkaç W’dan, MW’a kadar ölçeklendirilebilmesi gibi özelliklerinden dolayı en çok yaygınlaşan yenilenebilir enerji kaynağı türüdür. Bu enerji kaynağından en yüksek oranda yararlanılabilmesi maksimum güç noktasını izleyen (MPPT) dönüş…

Elektrik sistemlerinin arızasız ve güvenli bir şekilde çalışabilmesi, akım ve gerilim gibi devre büyüklüklerin 50 Hz frekansta ve sinüsoidal formda olmasına bağlıdır. Bununla birlikte bir çok nedenlerden dolayı bu temel büyüklükler sinüsoidal özelliklerini k…

Optimal operation of the power systems is very important. In this paper, a new approach for both the economic active power flow and active power loss minimization in multi-terminal HVDC systems is proposed. In the proposed optimization approach, system constra…

In this paper, a different approach for the optimal active power flow solution in multi-terminal HVDC systems to minimize total active power generation cost is proposed. System constraints for all of the control and state variables of both AC and DC systems ar…

Optimal reactive power flow and economic power dispatch is very important in power systems. Optimal reactive power flow provides minimum active power loss and economic power dispatch provides minimum active power generation cost in power systems. This study pr…

For a successful thermal performance, the right choice and design of the thermal management materials used in LED die-moulding, cooler and soldered parts is a critical engineering problem. Because they are affected by heat emitted from the pn junction in the L…

This study investigates the return on investment (ROI) of Building Information Modelling (BIM) in the construction industry and addresses common barriers to its adoption such as high start-up costs and lack of familiarity with the technology. Despite its prove…

The uncontrolled spread of forest fires, driven by climate change and increasing human activities, poses a significant global challenge, disrupting the delicate balance of ecosystems. These fires, whether caused by natural disasters or human factors, have seve…

Accurate and efficient detection of aircraft at airports is crucial for enhancing airport security, ensuring safe operations, and improving overall air traffic management. As airports grow in complexity and traffic density increases, automated object detection…

Biomedical Sciences are the technological disciplines that aim to explore methods to obtain, produce, reveal or produce information related to understand, model, monitor, diagnose, combat problems in human and/or animal bodies. Machine learning in biomedical t…

 Developments in economic and technological fields have led to the development of new production systems in manufacturing technology. It is argued that the traditional costing techniques applied by many enterprises today are not compatible with new production …

3D object classification has been widely studied in robotic community in recent years. According to types of features that are utilized to describe an object, 3D object classification studies can be separated into two main categories (local and global).The loc…

3 + 1 Training Model have been developed in vocational high schools in Turkey in order to train the qualified personnel needed by the industry with the technology and knowledge of the day at the right time. In this training model, the students receive 3 semest…

Kablosuz ağlar, veri sinyallerinin havadan iletildiği, kablo kullanmadan uzak mesafeler arasında iletişimi sağlayabilen teknolojilerdir. Kablosuz ağlarda veri, radyo frekansları veya kızılötesi ışınlar vasıtasıyla iletilir. Bu ağlardaki kullanıcılar arasında h…

In the present study, the effects of cutting parameters on surface roughness were investigated in order to determine the optimum machining conditions for the hot work tool steel (155 HB), which is an important part of the mold industry. For this purpose, the m…