Search

The Friction Stir Spot Welding (FSSW) method is a derivative of the Friction Stir Welding (FSW) process, which is a new welding process that recently has received considerable attention from the automotive and other industries. The studies of the different res…

In the present study, energy and exergy analyses of a solar powered absorption refrigeration system are corried out by terms of the first and second laws of thermodynamics. NH3-H2O fluid couple is used in the system. The analyses are performed with the help of…

3D printing filling structures at prototyping and design stage are increasingly important issue for products with complicated shapes. The objective of the present study is to investigate 3D printing filling structures effect on mechanical properties and surfac…

The aim of this study is to improve the quality of the effluent of Elazığ Municipal Wastewater Treatment Plant with the technique of phytoremediation used in a biotechnological application. For this purpose, a reactor design which the effluent of Elazığ Munici…

Evrimsel algoritma ve parçacık sürü algoritması çok uzun zamandır ayrı ayrı çeşitli karmaşık problemlerin çözümünde yaygın olarak kullanılan sezgisel algoritmalardır. Evrimsel algoritma canlıların çoğalmasını ve hayatta kalmak için en iyilerin seçilmesi tekniğ…

Nowadays, competition in industrial production has come to the top with technological improvements. In this competitive environment, producers need better quality, faster and less costly production methods. So, the use of industrial robotic systems is becoming…

In this study, the experimental application of polymer electrolyte membrane fuel cell (PEM-FC) with dc-dc boost converter is realized for compact design of electric vehicle (eV). The PEM-FC is an electro-chemical device which combines hydrogen with oxygen to p…

Analysis of faults in synchronous generators are so important to protect the generators and the power systems. In this paper, double line-to-ground fault analysis in unloaded synchronous generator is presented. Apart from the similar studies in the literature,…

Bu çalışmada balıklara doğal ve rahat bir yaşam alanı oluşturmak için akıllı bir akvaryum tasarımının yapılması amaçlanmıştır. Akvaryumun tasarımı için kullanılan elektronik bileşenlerin kontrolü Arduino mikrodenetleyicisi ile gerçekleştirilmiştir. Akvaryum iç…

In this study, an experimental investigation of electricity production from a thermoelectric cooler heated by solar energy heat pipe has been done. For this, a heat pipe with water as the working fluid has been manufactured. Approximately 300 ml of water stora…

In this work, Intralube E with 0.38 % C press-ready mix powders were pressed with 550 MPa pressure and sintered 25 min at 1120 °C. Samples were coated electrochemically with nano diamond (ND) reinforced nickel to study the effect of nano composite coating on c…

This study presents the investigation of thorium utilization in an ADS with Lead-Bismuth Eutectic (LBE) target. To effectively burn thorium, the ThO2 fuel rods cylindrically prepared, and cladded with SiC, are mixed with 233UO2 at volumetric ratio of 1%. These…

In this study, the effect of still water cooling on electricity generation in a thermoelectric generator heated by solar energy heat pipe is experimentally investigated. For this purpose, a heat pipe with ethyl alcohol as the working fluid has been manufacture…

Fins are basic structures which can be easily added to many engineering designs to improve heat transfer from hot surfaces. The addition of a fin to a particular heated surface can significantly increase the cooling at no extra cost. In some cases, standard fi…

The aim of this study is to forecast installed wind power which is a one of the renewable energy resources in Turkey for the year of 2017 based on artificial neural network method using the normalized last ten-year data. An artificial neural network has been c…

Stress corrosion is a dangerous type of corrosion occuring as a result of effective with corrosive environment and stress of sensitive a material. Many metallic material may be exposed to stress corrosion damage depending on operating conditions. In order to d…

Several test suites have been developed to test the statistical properties of random numbers generated from pseudotrue random number generators. Some of these are Crypt-X, Diehard, FIPS 140, NIST 800-22 AIS31 test suites. In this study, web based application o…

This paper describes a laboratory application for the forecasting the dielectric properties, using an artificial neural network embedded in a microprocessor. The dielectric permittivity and loss factor of the insulation material were determined as a function o…

The use of GPUs for general purpose applications is not a recent approach, but it was quickly becoming widespread with NVIDIA's CUDA (Compute Unified Device Architecture) architecture based on C programming language in 2007. Algorithms suitable for parallel op…

In this study, Al-12Si ingot alloy was melted in an electric resistance furnace and then poured into metal moulds through traditional casting method. Optimum machining conditions is aimed to determine by investigating the effects of cutting parameters on surfa…