Search

In this work, the effects of bis (2-methoxy-4-allylphenyl) oxalate (I) on levitation (Fz) and lateral forces (Fx) of bulk MgB2 superconductor has been investigated and reported for the first time. All samples were prepared from magnesium powder (Mg, 99.8 %),…

Fuel cells can be considered as clean, efficient and economic devices for the next power generation. Flow configuration and operating conditions such as temperature, relative humidity and stoichiometric number are key factors for improving cell performance. …

Optimal reactive power flow and economic power dispatch is very important in power systems. Optimal reactive power flow provides minimum active power loss and economic power dispatch provides minimum active power generation cost in power systems. This study pr…

Current study is related with numerical simulation of a centrifugal pump impeller with the specific speed of nq=13. By the help of computational fluid dynamics (CFD) at different operating points, pump performance rsults (Head-Discharge graph) are obtained. Si…

The present study investigates the heat transfer characteristics of swirling coaxial confined impinging turbulent air jets. Experimental range covers different values of dimensionless nozzle-to-plate distance (H / D = 0.5, 1 and 2) and dimensionless flowrate…

In this paper, a different approach for the optimal active power flow solution in multi-terminal HVDC systems to minimize total active power generation cost is proposed. System constraints for all of the control and state variables of both AC and DC systems ar…

Çarpan jetler, iyi bir ısı transferi performansı sağlamaları nedeniyle genellikle sanayide elektronik ekipmanların ısıl problemlerini çözmek için kullanılırlar. Bu çalışmada, tek bir hava jeti akışı kullanılarak bir tarafı açık, üç tarafı kapalıdikdörtgensel…

This paper presents a different approach for the optimal active power flow solution in multi-terminal AC-DC systems to minimize total active power generation cost. System constraints for all of the control and state variables of both AC and DC systems are also…

Open channel flow is defined as fluid flow with a free surface open to the atmosphere. One of the main sources of resistance in open channel flow is the roughness of channel bed. The roughness of channel base and side walls must be considered seperately invest…

The continuity of life and the development of civilization are directly related to the correct and careful use of resources in the world. The 19th and 20th centuries are the centuries which involve greatest changes in the history of mankind. The industrial era…

Optimal operation of the power systems is very important. In this paper, a new approach for both the economic active power flow and active power loss minimization in multi-terminal HVDC systems is proposed. In the proposed optimization approach, system constra…

Coils are electrical-electronic circuit elements and they are obtained by winding conductive wires on top of one another on a core or space, when electrical current pass through the coils they bring a magnetic field around them. The electromotive force (emf) t…

In this study, the problem of dam break wave propagation over a dry bed in a horizontal rectangular channel was investigated. Dam break event was represented by a sudden removal of the plate which has water on the upstream side. The experiment was recorded b…

In this study, mixed convection heat transfer and fluid flow in a three-dimensional horizontal duct with three different geometries of cavity were investigated numerically. Air flows in a square duct which is heated by a cavity with triangular, a rectangular a…

One of the most consumed energy sources today is fossil-based fuels. While the reserve of these fuels is declining, it continues to be the main cause of environmental pollution. Due to the influence of environmental factors and increases in fuel costs has acce…

Energy dissipaters used in open channels are devices designed to reduce the flow velocity and allow water to pass downstream without harming water structures and environment. In this study the effect of energy dissipaters on energy loss is investigated depende…

Taşıyıcı sistemlerin deprem, rüzgar gibi etkiler altında dinamik analizinde serbest titreşim analizi önemli bir yer tutmaktadır. Dinamik yükler altında taşıyıcı sistemlerin serbest titreşim analizi sürekli veya ayrık kütleli hesap modelleri kullanılarak gerç…

In many engineering applications such as aerospace, automotive and telecommunications, icing leads to mechanical and socio-economic problems such as efficiency reduction, decreased power transmission, security threat, material damage and energy waste. Theref…

The rapid increase in the world population and climate change due to industrialization require the preservation and sustainability of existing water resources. The calculation of drainage networks that are directly related to watershed management is very impor…

Developing technology, and electronic devices, power consumption is increasing day by day. At the present time, there are many methods used to generate electricity. Most of these methods cause environmental pollution. The share of thermal power plants in elect…