Search

In this paper, a thermal insulation analysis was carried out for a building using paper waste reinforced clay brick as building material. Firstly, the analysis was made using two different normal wall bricks as building material for the sample building. Later,…

Refrigeration and air-conditioning systems consume about 15% of global electricity, and 46% of energy used in household and commercial buildings belongs to heating, ventilation and air-conditioning (HVAC) systems. Vapor-compression technologies dominate the HV…

Fins are basic structures which can be easily added to many engineering designs to improve heat transfer from hot surfaces. The addition of a fin to a particular heated surface can significantly increase the cooling at no extra cost. In some cases, standard fi…

In this article, the influence of the use of three different bricks on the building heat performance is compared for use on wall surfaces as a building construction element. At the beginning of the analysis, the thermal analysis of the building was carried out…

In this study, research on the determination of the technological level in the greenhouse mechanization in Southeastern Anatolia Region of Turkey has been carried out. The technological equipment and operating parameters that should be in a modern greenhouse h…

Exhaust gas distribution in street canyons is one of the important research subjects in urban air quality studies. Vehicle emissions are an important group of pollutants in urban areas. In this study, the dispersion of exhaust emissions from vehicles in canyon…

Building automation and control systems (BACs) allow plants in buildings to be controlled and managed, thus increasing the users' comfort and reducing the operation and maintenance costs. As far as the lighting services are concerned, control systems offer an …

Friction stir spot welding (FSSW) method is prone to automation. In this way, by integrating the robot and automation systems have been easily developed. Thanks to the method, the effective overlapping joints can be obtained a short processing time. In the stu…

The Friction Stir Spot Welding (FSSW) method is a derivative of the Friction Stir Welding (FSW) process, which is a new welding process that recently has received considerable attention from the automotive and other industries. The studies of the different res…

3D printing filling structures at prototyping and design stage are increasingly important issue for products with complicated shapes. The objective of the present study is to investigate 3D printing filling structures effect on mechanical properties and surfac…

For a successful thermal performance, the right choice and design of the thermal management materials used in LED die-moulding, cooler and soldered parts is a critical engineering problem. Because they are affected by heat emitted from the pn junction in the L…

Stress corrosion is a dangerous type of corrosion occuring as a result of effective with corrosive environment and stress of sensitive a material. Many metallic material may be exposed to stress corrosion damage depending on operating conditions. In order to d…

This paper describes a laboratory application for the forecasting the dielectric properties, using an artificial neural network embedded in a microprocessor. The dielectric permittivity and loss factor of the insulation material were determined as a function o…

The column materials in the form of monodisperse and porous particles were synthesized with regard to test their column performances in Ion Exchange Chromatography (IEC) mode. Particles in the form of poly(glycidil methacrylate-coethyleneglycol dimethacrylate)…

The aim of this study is to determine instantaneous irradiance and annual percentile sunlit time on the available rooftop floor area of Technical and Social Science Vocational School at Usak University by simulation using open source software. The building of …

Aim of the study: It is important to be able to plan the production transmission and distribution necessary for uninterrupted electricity and to use the electricity more efficiently and to make demand forecasts. For this reason, it is aimed to estimate the ele…

The column materials in the form of monodisperse and porous particles were synthesized with regard to test their column performances in Ion Exchange Chromatography (IEC) mode. Particles in the form of poly(glycidil methacrylate-coethyleneglycol dimethacrylate)…

The column materials in the form of monodisperse and porous particles were synthesized with regard to test their column performances in Ion Exchange Chromatography (IEC) mode. Particles in the form of poly(glycidil methacrylate-coethyleneglycol dimethacrylate)…

Grinding of brittle material such as glass is becoming crucial in consequence of rapid growth in the area of white goods. Industrial area, during flat glass processing iron based diamond wheels can be selected in order to improve the service life of the grindi…

Use of superplasticing chemical admixtures in concrete production is widespread all over the world and has become almost inevitable. Super-plasticizers (SPA), extend the setting time of concrete by adsorbing onto cement particles and provide concrete to preser…