Skip to content
Research Article Open Access

Design of DFT Algorithm and Realization by Using FPGA

1selcuk university
✉ Corresponding author: Kürşad Uçar · kucar@selcuk.edu.tr
PDF BibTeX RIS

Abstract

Field Programmable Gate Arrays (FPGAs) are configurable logic semiconductor devices which connect by programmable interconnections. They can be reprogrammed to desired application or functionality requirements. VHDL is a one of the hardware descriptive languages that use for changing the structure of the FPGA hardware. With DFT, discrete time data sets converts into a discrete-frequency representation, so this procedure provides a process of fast programming that often uses in signal processing. In this study, a design for processing DFT proposes. A 16 point DFT algorithm wrote using VHDL. The inputs of the design are 32 bit single precision floating numbers, these input points processed by Cooley-Tukey DFT algorithm and as a result 16 points complex numbers which are again in single precision floating point format obtained. During the processing of the data, Random access memory (RAM) element and pipeline registers are used for storing of the intermediate values. DFT operation conducted in three stages and each of the stage work parallel to other. Developed VHDL code realized physically by using Altera FPGA board.  

Keywords

Cite this article

Uçar, K., & Koçer, H. E. (2017). Design of DFT Algorithm and Realization by Using FPGA. In International Symposium on Multidisciplinary Studies and Innovative Technologies (pp. 183–187). SET Technology.

Article History

Published
8 Dec 2017

License

© 2017 SET Technology. This article is distributed under the terms of the CC BY 4.0.

Research Contributions (2019+)Peer reviewed by at least two reviewers
Open AccessCC BY 4.0
Open Discovery Metadata · DOI · OAI-PMH
Global Reachresearchers worldwide