Denim Pantolon Üretiminde Ölçü Değişimlerinin İncelenmesi
Abstract
Bu çalışmada, denim pantolon üretiminde sıklıkla karşılaşılan ölçü probleminin analizi yapılmıştır. Öncelikle, işletmenin iş akışı çıkarılmış, ürünün izlediği yollar analiz edilmiştir. Altı farklı modelin ayrıntılı olarak ele alındığı çalışmada, kalıphanenin ölçüm değişim tahminlerinde ne derece sapma olduğu ve bu sapmanın kullanılan hammadde oranıyla ilişkisi kontrol edilmiştir. 3000’den fazla üründen alınan ölçülere bağlı olarak gerçekleştirilen istatistiksel değerlendirme yardımıyla, beden ölçüsünün değişimine bağlı olarak bel ve basen farklılığın ne şekilde olduğu konusunda bir inceleme gerçekleştirilmiştir. Beden ölçüsünün hem bel hem basen farklılığı açısından, düşük seviyede de (bel farklılığı için 0,08, basen farklılığı için 0,177) olsa korelasyon etkisi olduğu tespit edilmiştir. Aynı şekilde kumaşta kullanılan elastan oranının, bel ve basen farklılığına korelasyon etkisinin zayıf derecede olduğu belirlenmiştir. Eldeki örneklem büyüklüğü göz önüne alınarak, kalıp departmanı için bazı tavsiyelerde bulunulmuştur.
English-language details
Analysis of Measurement Changes in Denim Trouser Production
This study analyzes the measurement problem frequently encountered in denim trouser production. First, the company's workflow was determined, and the product's path was analyzed. In this study, which examined six different models in detail, the degree of deviation in the pattern making department's measurement change predictions and the relationship between this deviation and the raw material ratio used were checked. Using statistical evaluation based on measurements taken from more than 3000 products, an examination was conducted on how waist and hip differences are affected by changes in body measurements. It was determined that there is a correlation effect, albeit at a low level (0.08 for waist difference, 0.177 for hip difference), between body measurements and both waist and hip differences. Similarly, it was determined that the elastane ratio used in the fabric has a weak correlation effect on waist and hip differences. Considering the sample size, some recommendations were made for the pattern department.
Keywords
Cite this article
Ünal, C. (2018). Analysis of Measurement Changes in Denim Trouser Production. In 2nd International Symposium on Innovative Approaches in Scientific Studies (pp. 491–496). SET Technology.
Article History
- Published
- 31 Dec 2018
License
© 2018 SET Technology. This article is distributed under the terms of the CC BY 4.0.