Skip to content
Home / Search

Search

Conference: 1d94fec9-c4fe-4034-9157-0b205eef4e56 × Clear filters

32 results for “heat transfer”

Research Article Open Access Yenilikçi Soğutma Teknolojileri: Isı Boruları
Burak Markal, Markal B, Kübra Aksoy, Aksoy K
Ist International Symposium on Innovative Approaches in Scientific Studies 2018

Yenilikçi soğutma teknolojileri arasında yer alan ısı boruları, sahip olduğu özgün karakteristikler sebebiyle son yıllarda önemli bir araştırma alanı olarak ortaya çıkmaktadır. Isı boruları, taşınımla ısı geçişi ve sıvı-buhar faz değişimi ilkelerinden faydalan…

Research Article Open Access Strength Development of Fly Ash-Based Sodium Meta-Silicate and Heat Activated Geopolymer Mortar
Cengiz Duran Atiş, Atiş C, Omeed Adwal Ali  Ali, Ali O, Uğur Durak, Durak U, Serhan İlkentapar, İlkentapar S, Okan Karahan, Karahan O
Ist International Symposium on Innovative Approaches in Scientific Studies 2018

In this study, the development of the compressive strength obtained by heat-activation of the mortar produced with Fclass fly ash and sodium meta-silicate was investigated. In the study, mortar samples were produced using F class fly ash, standard Rilem sand a…

Research Article Open Access Heating System Application with Ground Source Heat Pump for Isparta Climate Conditions
Osman İpek, İpek O, Mohammed  Alkhalidi  , Alkhalidi   M, Mehmet Kan, Kan M, Barış Gürel, Gürel B, Sedeeq  Alomari, Alomari S
Ist International Symposium on Innovative Approaches in Scientific Studies 2018

One of the most consumed energy sources today is fossil-based fuels. While the reserve of these fuels is declining, it continues to be the main cause of environmental pollution. Due to the influence of environmental factors and increases in fuel costs has acce…

Research Article Open Access Investigation of Heat Transfer and Fluid Flow in Horizontal Duct with Different Cavity Geometry
Çisil TİMURALP, TİMURALP Ç, Zerrin SERT , SERT  Z, Mesut TEKKALMAZ , TEKKALMAZ  M
Ist International Symposium on Innovative Approaches in Scientific Studies 2018

In this study, mixed convection heat transfer and fluid flow in a three-dimensional horizontal duct with three different geometries of cavity were investigated numerically. Air flows in a square duct which is heated by a cavity with triangular, a rectangular a…

Research Article Open Access Solar Thermal Energy Storage
Mehmet Emin Canlı, Canlı M, Himmet Erdi Tanürün , Tanürün  H, Adem Acır, Acır A
Ist International Symposium on Innovative Approaches in Scientific Studies 2018

Energy is at the forefront of the needs to maintain the continuity of life and make it easier, and the energy demand is increasingly dependent on population growth. Today, fossil energy resources are widely used to meet energy demand and renewable energy resou…

Research Article Open Access Combined Heat Transfer in Glass and Plastic Covered Solar Collector
Zerrin SERT , SERT  Z, Çisil TİMURALP, TİMURALP Ç, Mesut TEKKALMAZ , TEKKALMAZ  M
Ist International Symposium on Innovative Approaches in Scientific Studies 2018

In this study, combined thermal radiation and natural convection heat transfer problem are investigated in glass and plastic covered flat solar collector. The bottom plate that absorbs the sunlight and the ambient temperature are kept constant. Solar collector…

Research Article Open Access Effects Of Heat Treatment On The Microstructure And Mechanical Properties Of Titanium Alloys
Mehmet Ekici, Ekici M, Uğur Özsaraç, Özsaraç U
Ist International Symposium on Innovative Approaches in Scientific Studies 2018

Titanium and titanium alloys are suitable for a variety of applications, with their low density, high strength and high corrosion resistance. Despite strong mechanical and corrosive qualities, titanium use is restricted by its weak friction and wear characteri…

Research Article Open Access The Effect of Cutting Parameters on Surface Hardness Change in Turning of 16MnCr5 Steel
Ümmü Gamze Durutürk, Durutürk Ü, Kağan Telek, Telek K, Ahmet Özdemir, Özdemir A
Ist International Symposium on Innovative Approaches in Scientific Studies 2018

Cementation steels; surface hardness is high and abrasion resistant materials.Also, cementation steels are materials with the alloyed or non-alloyed structure which materials used in the manufacture of parts which are resistant to shock and variable loads.Addi…

Research Article Open Access Outdoor Zippered Curtains
A.Aslı İlleez, İlleez A, Bülent İlleez, İlleez B
Ist International Symposium on Innovative Approaches in Scientific Studies 2018

The sun's rays, which are our source of life, give us pleasure to enjoy in the winter and spring, but in the summer, the steep and scorching rays disturb us all. For this reason, it is observed that on average, 52% of the cooling load needed in the calculation…

Research Article Open Access Abrasive Wear Behaviour of Hardened AISI 51B60H Boron Steel
Ümit Er, Er Ü
Ist International Symposium on Innovative Approaches in Scientific Studies 2018

One of the materials that are increasingly used today in various engineering applications is boron steels. Though boron steels draw attentions with their superior wear characteristics, studies on the tribological properties of these materials is quite limited …

Research Article Open Access Design and Application of Grey Predictor for Unglazed Transpired Solar Collector
Saliha Erentürk, Erentürk S, Köksal Erentürk, Erentürk K
Ist International Symposium on Innovative Approaches in Scientific Studies 2018

In order to evaluate different modeling techniques for Unglazed Transpired Collectors (UTC), not only mathematical modeling method for UTC based on heat transfer expressions to estimate the various heat transfer coefficients for the UTC components and empirica…

Research Article Open Access Stronsiyum ve Stronsiyum-Magnezyum katkılarının Al-9Si Alaşımının Yapısal ve Mekanik Özelliklerine Etkisi
Ali Paşa Hekimoğlu, Hekimoğlu A, Merve Çalış, Çalış M, Gizem Ayata, Ayata G
Ist International Symposium on Innovative Approaches in Scientific Studies 2018

Bu çalışmada birer adet ikili Al-9Si, üçlü Al-9Si-0,1Sr ve dörtlü Al-9Si-0,1Sr-0,6Mg alaşımı indüksiyonlu ergitme ocağında ergitme ve oda sıcaklığında tutulan kokil kalıba döküm yöntemi ile üretildi. Alaşımların yapısal ve mekanik özellikleri üretilen alaşım k…

Research Article Open Access Electricity Generation Using R134a in Organic Rankine Cycle
Osman İpek, İpek O, Merve Göltaş, Göltaş M, Mehmet Kan, Kan M, Barış Gürel, Gürel B
Ist International Symposium on Innovative Approaches in Scientific Studies 2018

Developing technology, and electronic devices, power consumption is increasing day by day. At the present time, there are many methods used to generate electricity. Most of these methods cause environmental pollution. The share of thermal power plants in elect…

Research Article Open Access Jeotermal Enerji Kullanılarak Termoelektrik Jeneratör İle Elektrik Enerjisi Üretimi
Ramazan Kayabaşı, Kayabaşı R, Kemal Atik, Atik K
Ist International Symposium on Innovative Approaches in Scientific Studies 2018

Jeotermal enerji varlığını dünyanın kuruluşundan bu yana sürdürmüş temiz bir enerji türüdür. Her geçen yıl yeni jeotermal alanlar bulunmakta ve kullanım alanları hızla artmaktadır. Enerji maliyetlerinin yükselme eğiliminde olduğu günümüzde jeotermal enerji alt…

Research Article Open Access Numerical Simulation of A Cavitating Centrifugal Pump
Aydın Hacı Dönmez, Dönmez A, Zehra Yumurtacı, Yumurtacı Z, Levent Kavurmacıoğlu, Kavurmacıoğlu L
Ist International Symposium on Innovative Approaches in Scientific Studies 2018

Current study is related with numerical simulation of a centrifugal pump impeller with the specific speed of nq=13. By the help of computational fluid dynamics (CFD) at different operating points, pump performance rsults (Head-Discharge graph) are obtained. Si…

Research Article Open Access Copolymerization of Thiophene with Carbazole Derivative and Investigation of Its Electrochemical and Electrochromic Behavior
Yasemin Torlak, Torlak Y
Ist International Symposium on Innovative Approaches in Scientific Studies 2018

Polycarbazole (PAAC) and poly (thiophene) (PTH) are both highly stable polymers. But the conductivity of (PAAC) is much lower than PTH. When polycarbazole and polythiophene alternative copolymers are synthesized, it is aimed to increase the conductivity of PAA…

Research Article Open Access CAUSAL RELATIONSHIP BETWEEN PUBLIC EXPENDITURE AND ECONOMIC GROWTH: TODA-YAMAMOTO APPROACH
Nigar Alev, Alev N
Ist International Symposium on Innovative Approaches in Scientific Studies 2018

In the history of economic thought, different hypotheses have been formed which reveal the interaction between public expenditure and national income. These hypotheses can be decomposed according to their economic and political content. Political content hypot…

Research Article Open Access Dry and Wet Chemical Etching Techniques for Patterning Silicon Surface
Serra Altınoluk, Altınoluk S
Ist International Symposium on Innovative Approaches in Scientific Studies 2018

Micro electro mechanical systems (MEMS) technology enables us to create any pattern with any dimension. There are many surface patterning techniques which help us transfer the desired pattern from mask to the wafer surface. Predefined patterns on the wafer sur…

Research Article Open Access Superhyrophobic Surface, Theory, Applications and Technological Importance
Selçuk Özcan, Özcan S, Gökhan   Açıkbaş  , Açıkbaş   G, Nurcan  Çalış Açıkbaş, Çalış Açıkbaş N
Ist International Symposium on Innovative Approaches in Scientific Studies 2018

Superhydrophobic surfaces and materials received great attention of scientists and engineers due to their unwetting, self cleaning and antimicrobial properties. Hydrophobic surfaces are defined as having sessile water drop contact angle greater than 90°, while…

Research Article Open Access Energy Storage Systems and Future Trends
Saliha Erentürk, Erentürk S, Köksal Erentürk, Erentürk K
Ist International Symposium on Innovative Approaches in Scientific Studies 2018

As a long-range vision, many countries is aimed to generate all of their heat and electricity without using fossil fuels. In the meantime, providing the sufficient power is convenient on demand is essential in new energy technologies whenever and wherever this…

Research Contributions (2019+)Peer reviewed by at least two reviewers
Open AccessCC BY 4.0
Open Discovery Metadata · DOI · OAI-PMH
Global Reachresearchers worldwide