Search

Optimal operation of the power systems is very important. In this paper, a new approach for both the economic active power flow and active power loss minimization in multi-terminal HVDC systems is proposed. In the proposed optimization approach, system constra…

A theoretical design assessment performed here to evaluate the idea of utilizing wave energy in the Red sea to power electric-cargo ships, in the route between Port Sudan and Jeddah Islamic port. The calculated mean wave power in 2018 was (1.4 MW), five wave p…

In this paper, a different approach for the optimal active power flow solution in multi-terminal HVDC systems to minimize total active power generation cost is proposed. System constraints for all of the control and state variables of both AC and DC systems ar…

Analysis of faults in synchronous generators are so important to protect the generators and the power systems. In this paper, double line-to-ground fault analysis in unloaded synchronous generator is presented. Apart from the similar studies in the literature,…

Recently, works on the development of equipment in the field of power electronics has been increasing day by day. Inverter design is one of the outstanding issues in the field of power electronics. One of the most important of these studies has been the multi-…

Artificial lighting is an important part of global electricity consumption. At office buildings, the energy consumed by artificial lighting can reach up to 40% of total energy consumption. This work is being done to find solutions to such problems with energy …

This paper presents a different approach for the optimal active power flow solution in multi-terminal AC-DC systems to minimize total active power generation cost. System constraints for all of the control and state variables of both AC and DC systems are also…

The aim of this study is to determine instantaneous irradiance and annual percentile sunlit time on the available rooftop floor area of Technical and Social Science Vocational School at Usak University by simulation using open source software. The building of …

With the help of ability to imitate the biological nervous system, Spiking Neural Networks (SNNs) architectures have become popular recently. In order to benefit at the maximum level from the low power consumption, event-based structure and parallelization fea…

In this study, mathematical modeling of an ohmic heating system has been done, firstly. Then, two different control approaches, PID and fuzzy logic control, have been considered to control of mathematically modeled ohmic heating system. An optimal PID controll…

Synchronous Reluctance Motors (SRMs) are defined as reliable electric motors. Although the history of this type of motor dates back a very long time, their usage areas have started to increase with the developments in power electronics in recent years. While t…

Solar energy from renewable energy sources can be used for different purposes. The most common areas of use are electricity generation and preparation of hot water. While photovoltaic (PV) modules are used for direct electricity production, commercial vacuum…

In this case study, the shading effect of 480 kW Solar power plant in ilkadım-Samsun was investigated. It is well known that the power generation of photovoltaic systems is significantly influenced by the partial or complete shading of the cells. The substat…

In this study, the experimental application of polymer electrolyte membrane fuel cell (PEM-FC) with dc-dc boost converter is realized for compact design of electric vehicle (eV). The PEM-FC is an electro-chemical device which combines hydrogen with oxygen to p…

The structure of the gas diffusion layer influences cell performance because it also affects the passage of reaction gases and electrons. In this study, the effect of the thickness of the gas diffusion layer on the cell performance for the singlecelled PEM fue…

In this study, a PID controller with fractional order derivative filter (PIDFF) is designed for automatic voltage regulation (AVR) in power systems. In order to ensure maximum transient and steady state performance from the designed controller, the controller …

Fossil fuels used by traditional internal combustion vehicles today are quite damaging to environment. Because of these fuels, global warming has reached a very dangerous point. However, fossil fuels are gradually depleting. Therefore, it is inevitable that el…

The majority of the resources used in the production of electricity in our country are imported. In order to meet the ever-increasing need for energy, it has started to turn to different and new generation energy sources. In this context, especially the use of…

This study presents the investigation of thorium utilization in an ADS with Lead-Bismuth Eutectic (LBE) target. To effectively burn thorium, the ThO2 fuel rods cylindrically prepared, and cladded with SiC, are mixed with 233UO2 at volumetric ratio of 1%. These…

In this study, mathematical modeling of outer rotor brushless direct current motor (BLCD) is performed. Brushless direct current motor is highly preferred in industrial applications when compared the other motor types with considering advantages and disadvanta…