Search

In this work, Intralube E with 0.38 % C press-ready mix powders were pressed with 550 MPa pressure and sintered 25 min at 1120 °C. Samples were coated electrochemically with nano diamond (ND) reinforced nickel to study the effect of nano composite coating on c…

In this study, AISI 430 ferritic stainless steel sheet with 0.6 mm thickness was joined by resistance spot welding at different welding times and currents. The effects of welding parameters on the mechanical properties of welded samples are defined in terms of…

For a successful thermal performance, the right choice and design of the thermal management materials used in LED die-moulding, cooler and soldered parts is a critical engineering problem. Because they are affected by heat emitted from the pn junction in the L…

In this paper, a structural-output is obtained to estimate 3D human pose using 3D human point cloud and monocular images. The Neural Network takes a human image and 3D pose as inputs and gives outputs a score value. Conditional Random Field (CRF) approach is u…

Friction stir spot welding (FSSW) method is prone to automation. In this way, by integrating the robot and automation systems have been easily developed. Thanks to the method, the effective overlapping joints can be obtained a short processing time. In the stu…

Analysis of faults in synchronous generators are so important to protect the generators and the power systems. In this paper, double line-to-ground fault analysis in unloaded synchronous generator is presented. Apart from the similar studies in the literature,…

Ortodontik tedavi sırasında diş hareketini etkileyen önemli faktörlerden biri sürtünme kuvvetidir. Sürtünme kuvvetine etki eden faktörlere müdahale edilebilirse ortodontik tedavinin süresi ve başarısı ile ilgili olumlu tahminler yapmak mümkün olacaktır. Sürtün…

In this study, 0-12wt.% of Si3N4 or 0-30wt.% of SiC was added to the aluminum matrix by powder metallurgy method. Hence, the effect of reinforcement elements’s (SiC or Si3N4) amount on the mechanical properties was examined. Micro structures and crystal struct…

In this study, Al-12Si ingot alloy was melted in an electric resistance furnace and then poured into metal moulds through traditional casting method. Optimum machining conditions is aimed to determine by investigating the effects of cutting parameters on surfa…

Stress corrosion is a dangerous type of corrosion occuring as a result of effective with corrosive environment and stress of sensitive a material. Many metallic material may be exposed to stress corrosion damage depending on operating conditions. In order to d…

İnsanoğlunun hayatını devam ettirebilmesi için, yaşamı boyunca her türlü yapıya ihtiyaç duymaktadır. Bu bazen çok katlı bir yapı, bazen ise köprü kolonu ya da kirişi olabilmektedir. Yapısal bir eleman olan kolon veya kiriş ister köprüde ister binada kullanılsı…

Bu çalışmada doğalgaz borularının kaynaklanabilirliğinin tespiti için API 5L X52 kalite 21,3 mm (1/2 inç) yarıçapında 2,8 mm et kalınlığına sahip borular 100 mm boyutlarında kesilmiş ve kaynak ağzı açılmıştır. Kaynak ağzı açılmış olan numuneler oksigaz, elektr…

Researchers attention on the optimization methods to solve several applications increases recently by the advances in the technological field. The Artificial Bee Colony algorithm that has been quite popular during the recent years is firstly used in this study…

Wireless Sensor Networks have many application fields including both industrial and military usages. They are used for monitoring temperature, distance, light, and motion in laboratories and/or application specific environments. This paper focuses on developin…