17 results for “compressive strength”
Research Article
Open Access High performance cement composites with nano-SiO2 and nano-Al2O3 powders
Tuğba Mutuk, Mutuk T, Sinem Çevik, Çevik S, Başak Mesci Oktay, Mesci Oktay B
4th International Symposium on Innovative Approaches in Engineering and Natural Sciences 2019 https://doi.org/10.36287/setsci.4.6.099
In this study, the effects nano-SiO2 and nano-Al2O3 on cement mortars were experimentally studied. The percentage of nano-powders were used as 1%, 3% and 5% into the material. Different types of analysis were used to nano-powder’s impact on the cement mortars.…
Research Article
Open Access Karot Basınç Dayanımınını Etkileyen Faktörlerin Araştırılması
Ehsanullah Samadoghli , Samadoghli E, Mehmet Kamanlı , Kamanlı M, Salih Cengiz , Cengiz S, Alptuğ Ünal , Ünal A
3rd International Symposium on Innovative Approaches in Scientific Studies (Engineering and Natural Sciences) 2019
Yapıların depreme karşı güvenliğini artırmak için yerinde beton basınç dayanımının belirlenmesinin önemi gün gittikçe artmaktadır. Bunun için mevcut yapıların güvenliğinin artırılması büyük önem arzetmektedir. Bu çalışmada yerinde beton basınç dayanımının beli…
Research Article
Open Access Mechanical and Solubility Behavior of Chitosan Coated Hydroxyapatite Foams
Rasul Dadaev, Dadaev R, Mevlüt Gürbüz, Gürbüz M
3rd International Symposium on Innovative Approaches in Scientific Studies (Engineering and Natural Sciences) 2019
In this study highly porous hydroxyapatite foam fabricated by powder metallurgy method for various sintering
temperatures and coated with chitosan after sintering. The solubility of the samples were in Lactated Ringer's solutions for
various day. From the re…
Research Article
Open Access Mechanical Properties of the Combined Single Lap-Shear Connections with Graphene Doped Epoxy Adhesives
Necati ATABERK, ATABERK N, Mürsel EKREM, EKREM M, Yasin ÖZDEMİR, ÖZDEMİR Y
3rd International Symposium on Innovative Approaches in Scientific Studies (Engineering and Natural Sciences) 2019
In this study, it is aimed to strengthen epoxy with graphene as an adhesive, because of recently the outstanding
properties of graphene. For this purpose, the effects of graphene usage on shear strength of modified epoxy-based adhesives
were examined. The sh…
Research Article
Open Access Atık Hematitin Dolgu Malzemesi Olarak Hint Yağı Tabanlı Poliüretan Yapıştırıcılarda Kullanılabilirliğinin Araştırılması
Fatmanur Kübra Bakır, Bakır F, Mehmet Demir, Demir M, Özgür Karakaş, Karakaş Ö, Erdoğan Kanca, Kanca E
4th International Symposium on Innovative Approaches in Engineering and Natural Sciences 2019 https://doi.org/10.36287/setsci.4.6.123
Atık Hematitin Dolgu Malzemesi Olarak Hint Yağı Tabanlı Poliüretan Yapıştırıcılarda Kullanılabilirliğinin Araştırılması Fatmanur Kübra BAKIR1*+, Erdoğan KANCA 2 1Şampiyon Filtre Ar-Ge Merkezi, Hatay, Türkiye 2Makina Mühendisiliği / Mühendislik ve Doğa Bilimler…
Research Article
Open Access Wood Protection in Varnish (Nano) and Pressure Resistance Change
Hüseyin Tan, Tan H
4th International Symposium on Innovative Approaches in Engineering and Natural Sciences 2019 https://doi.org/10.36287/setsci.4.6.066
In this study, the impregnation of Lareks wood with borax and nanotechnological varnish at various vacuum / diffusion times according to ASTM 1413-76 standards and the changes on technological properties were investigated. Pressure resistance properties were d…
Research Article
Open Access The Effect of MWCNT Addition on Mechanical Properties of Epoxy Based Adhesives
Necati ATABERK, ATABERK N, Mürsel EKREM, EKREM M, Yasin ÖZDEMİR, ÖZDEMİR Y
3rd International Symposium on Innovative Approaches in Scientific Studies (Engineering and Natural Sciences) 2019
In this study, multi-walled carbon nanotubes (MWCNT) in different weight ratios effect on the mechanical
properties of modified epoxy based adhesive under an axial load was investigated. 0.25, 0.50, 0.75 and 1 % by weight ratio the
MWCNT added epoxy adhesive…
Research Article
Open Access AHŞAPTA NANOTEKNOLOJİK VERNİK / TUTKAL KULLANIMI ve ETKİLERİ
Hatice Ulusoy, Ulusoy H, Hüseyin PEKER, PEKER H
3rd International Symposium on Innovative Approaches in Scientific Studies (Engineering and Natural Sciences) 2019
Nanoteknolojik çalışmalar bazı literatürlerde MÖ 2000 yıllara kadar dayandığı bildirilmiştir. Mısır uygarlığında ilk nano ürünler (mürekkep üretiminde) yalın düzeyde de olsa göze çarpmaktadır. Özellikle teknolojisinin gelişmesine paralel olarak günümüz bilim d…
Research Article
Open Access Use of GFRP Bar in Civil Engineering
Ahmet Emin Uğur, Uğur A, Alptuğ Ünal, Ünal A, Burak Arda Akgöbek, Akgöbek B, Mehmet Kamanlı, Kamanlı M, Salih Cengiz, Cengiz S
4th International Symposium on Innovative Approaches in Engineering and Natural Sciences 2019 https://doi.org/10.36287/setsci.4.6.029
Conventional steel bar does not have high resistance to corrosion. In addition, considering the cost of conventional steel bar, the search for an alternative reinforcing element continues. In this search, GFRP bar are tested, necessary corrections are made and…
Research Article
Open Access Rib Spacing Optimization of a Generic UAV Wing to Increase the Aeroelastic Endurance
Tolga Vergün, Vergün T, Ceyhun Tola, Tola C
4th International Symposium on Innovative Approaches in Engineering and Natural Sciences 2019 https://doi.org/10.36287/setsci.4.6.032
Design and usage of Unmanned Aerial Vehicles (UAV) especially for military purposes has been rapidly increasing in recent years due to their capability to endure long flight durations without needing a crew and due to their low cost compared with the conventio…
Research Article
Open Access Colorization of 1-D photonic crystals with Rare-earth element doping
O. Yasin Keskin, Keskin O, N. Funda Ak Azem, Ak Azem N, Isil Birlik, Birlik I, Ramazan Dalmış, Dalmış R
4th International Symposium on Innovative Approaches in Engineering and Natural Sciences 2019 https://doi.org/10.36287/setsci.4.6.109
Nowadays, nature-inspired structural colorization takes increasing attention due to its exceptional optical properties. One-dimensional (1-D) photonic crystals are new kind of optical materials which can be used to obtain structural colorization. In recent yea…
Research Article
Open Access Ahşapta Çevreyle Dost Bor Bileşikleri/Mordan Kullanımı ve Tutunma Düzeyi
Hüseyin Peker, Peker H
International Congress on Human-Computer Interaction, Optimization and Robotic Applications 2019 https://doi.org/10.36287/setsci.4.5.005
Sarıçam odununun çeşitli vakum/difüzyon sürelerinde emprenye işlemine tabi tutulması ve su bazlı vernik uygulamasıyla da çeşitli teknolojik özellikleri belirlenmiştir. Emprenye işleminde ASTM 1413 76 esaslarına uyulmuş olup; kullanılan emprenye maddelerinin öz…
Research Article
Open Access Theoretical & Experimental Shape Optimization Of Cantilever Beam by Constrained Optimization Method
Uğur Poyraz, Poyraz U, L. Özlem Akkan, Akkan L, Şahin Yavuz, Yavuz Ş
International Congress on Human-Computer Interaction, Optimization and Robotic Applications 2019 https://doi.org/10.36287/setsci.4.5.032
The term structural optimization is commonly used for the optimization of engineering structures, such as building, automobile, or airplane structures for improved strength, stiffness properties, fatigue life and reduced weight or cost. Main purpose of this st…
Research Article
Open Access Internet of Things and Agricultural Applications
Ali Çaylı, Çaylı A
3rd International Symposium on Innovative Approaches in Scientific Studies (Engineering and Natural Sciences) 2019
The increasing world population has increased the demand for food. Many threats such as agricultural land use, environmental impacts, global warming and drought risks necessitate industrialization of agricultural production and optimum utilization of existing …
Research Article
Open Access The Relationship between Yarn Properties and Pilling Resistance in Knitted Fabrics
Abdurrahman Telli , Telli A
3rd International Symposium on Innovative Approaches in Scientific Studies (Engineering and Natural Sciences) 2019
Pilling resistance is an important subject for apparel industry. The purpose of this research was to determine whether the physical yarn properties have an effect on pilling resistance of knitted fabrics. In addition, the other aim of work was to investigate w…
Research Article
Open Access Zn-15Al-3Cu-(0,5-3)Si alaşımlarının yağlı çalışma koşullarındaki sürtünme ve aşınma özelliklerinin incelenmesi
Ali Paşa Hekimoğlu , Hekimoğlu A, Temel Savaşkan , Savaşkan T
3rd International Symposium on Innovative Approaches in Scientific Studies (Engineering and Natural Sciences) 2019
Bu çalışmada, silisyum oranları %0,5 ile %3 arasında yer alan altı adet Zn-15Al-3Cu-Si alaşımı kokil döküm yöntemiyle üretildi. Silisyum oranının üretilen alaşımların yapısal, mekanik ve tribolojik özelliklerine etkileri araştırıldı. Alaşımların içyapıları tar…
Research Article
Open Access Bor Mineralleri ve Atıkları İle Üretilen Betonarme Yapılarda Yangına Dayanıklılığın Araştırılması
Hasan SÖYLEMEZ , SÖYLEMEZ H, Oğuzhan Yavuz BAYRAKTAR , BAYRAKTAR O
3rd International Symposium on Innovative Approaches in Scientific Studies (Engineering and Natural Sciences) 2019
Dünya toplam bor rezervi sıralamasında Türkiye % 72’lik pay ile ilk sıradadır. Bor elementinin; ilaç ve kozmetik sanayi, inşaat ve çimento yapımı, cam sanayi, kimya sanayi, ahşap malzemelerinde koruyucu, makine sanayi, nükleer sanayi, tarım sektörü ve otomobil…
