Search

In this study, the development of the compressive strength obtained by heat-activation of the mortar produced with Fclass fly ash and sodium meta-silicate was investigated. In the study, mortar samples were produced using F class fly ash, standard Rilem sand a…

Evaluation of rock engineering properties is a significant phenomenon for mining, civil and geotechnical engineering disciplines. Uniaxial compressive strength is one of the most important engineering parameters and it is used to characterize rocks from the …

Timber structures are used as building elements in ancient times due to the lightness and durability. Formwork material of reinforced concrete structures are also made of wood. Although timber is widely used in industry, it has been limited research in liter…

Friction stir spot welding (FSSW) method is prone to automation. In this way, by integrating the robot and automation systems have been easily developed. Thanks to the method, the effective overlapping joints can be obtained a short processing time. In the stu…

The Friction Stir Spot Welding (FSSW) method is a derivative of the Friction Stir Welding (FSW) process, which is a new welding process that recently has received considerable attention from the automotive and other industries. The studies of the different res…

Atık Hematitin Dolgu Malzemesi Olarak Hint Yağı Tabanlı Poliüretan Yapıştırıcılarda Kullanılabilirliğinin Araştırılması Fatmanur Kübra BAKIR1*+, Erdoğan KANCA 2 1Şampiyon Filtre Ar-Ge Merkezi, Hatay, Türkiye 2Makina Mühendisiliği / Mühendislik ve Doğa Bilimler…

In this study, multi-walled carbon nanotubes (MWCNT) in different weight ratios effect on the mechanical properties of modified epoxy based adhesive under an axial load was investigated. 0.25, 0.50, 0.75 and 1 % by weight ratio the MWCNT added epoxy adhesive…

Bu çalışmada birer adet ikili Al-9Si, üçlü Al-9Si-0,1Sr ve dörtlü Al-9Si-0,1Sr-0,6Mg alaşımı indüksiyonlu ergitme ocağında ergitme ve oda sıcaklığında tutulan kokil kalıba döküm yöntemi ile üretildi. Alaşımların yapısal ve mekanik özellikleri üretilen alaşım k…

In this study, two different welding methods as TIG and TIG Pulse are used for joining 304 series stainless steel sheets having 2 mm thickness. In preparation of welded specimens were used three different welding currents ranging from 70 A to 110 A by rise o…

In the last century, there has been an ever-increasing demand for novel materials namely known as composites. Biological fibers are reinforcement materials of composite structures owing to their economic and ecological advantages. Among these fibers, plant f…

The concrete, which is an important building material, has a wide range of uses through its economic advantages and many other advantages. Economics, easy obtainable, long life, easy curing and workability are some of the advantages. Concrete is the most used …

Conventional steel bar does not have high resistance to corrosion. In addition, considering the cost of conventional steel bar, the search for an alternative reinforcing element continues. In this search, GFRP bar are tested, necessary corrections are made and…

In this study, AISI 430 ferritic stainless steel sheet with 0.6 mm thickness was joined by resistance spot welding at different welding times and currents. The effects of welding parameters on the mechanical properties of welded samples are defined in terms of…

It was aimed to find the structural discontinuities of the Eastern Anatolia Region by using horizontal gradient magnitude technique. When determining the structural discontinuities of the region, the maximum amplitudes of the horizontal gradient magnitude we…

Titanium and its alloys are increasingly used in aerospace, automotive and biomedical industries because of their high strength, excellent corrosion, wear resistance and a wide range of mechanical properties. Materials with superior properties are needed in …

Complexity in the behavior of asphalt binders are further escalated with geopolymer (fly ash and the alkali liquid) modification thus, making it difficult to predict the performance of the binder accurately. This study employs artificial neural network model…

Stress corrosion is a dangerous type of corrosion occuring as a result of effective with corrosive environment and stress of sensitive a material. Many metallic material may be exposed to stress corrosion damage depending on operating conditions. In order to d…

Kayseri’nin Talas ilçesi, yüzyıllar boyunca pek çok medeniyete ev sahipliği yapmış, bu süreçte önemli kültürel izler bırakan tarihi yapılarla zenginleşmiştir. Ancak bu yapılardan bazıları, çeşitli doğal ve insan kaynaklı etkenler nedeniyle ciddi ölçüde tahrip …

Many well-known material structures, such as metals, ceramics or polymers, cannot meet all the technological demands. For this reason, there is ongoing research into new materials with advanced features. A composite material is consisting of at least two phase…

Pilling resistance is an important subject for apparel industry. The purpose of this research was to determine whether the physical yarn properties have an effect on pilling resistance of knitted fabrics. In addition, the other aim of work was to investigate w…