17 results for “load”
Research Article
Open Access Comparison of Control Methods Approaches in Microgrid Architectures
Ayşe Bağıran, Bağıran A, Köksal Erentürk, Erentürk K
4th International Symposium on Innovative Approaches in Engineering and Natural Sciences 2019 https://doi.org/10.36287/setsci.4.6.070
A microgrid is a power grid consists of distributed power generation units and loads. Microgrid is also a system that can operate in grid-connected mode and islanding (autonomous) mode. The control of distributed power generation units in microgrids is necessa…
Research Article
Open Access The Use of New Approaches in Civil Engineering Decisions for Disaster Risk Reduction
Gaioz Partskhaladze, Partskhaladze G, Elguja Medzmariashvili, Medzmariashvili E, Guram Gabrichidze, Gabrichidze G, Teimuraz Melkadze, Melkadze T, Merab Khalvashi, Khalvashi M
4th International Symposium on Innovative Approaches in Architecture, Planning and Design 2019 https://doi.org/10.36287/setsci.4.7.048
Many structures, machinery, equipment, heritages, also socio-cultural systems may be subjected to the unfavourable impact caused by various disaster risks, such as flooding, heavy snow, earthquakes, landslides, hurricanes etc. For prevention and reduction of d…
Research Article
Open Access The Effect of MWCNT Addition on Mechanical Properties of Epoxy Based Adhesives
Necati ATABERK, ATABERK N, Mürsel EKREM, EKREM M, Yasin ÖZDEMİR, ÖZDEMİR Y
3rd International Symposium on Innovative Approaches in Scientific Studies (Engineering and Natural Sciences) 2019
In this study, multi-walled carbon nanotubes (MWCNT) in different weight ratios effect on the mechanical
properties of modified epoxy based adhesive under an axial load was investigated. 0.25, 0.50, 0.75 and 1 % by weight ratio the
MWCNT added epoxy adhesive…
Research Article
Open Access Atık Hematitin Dolgu Malzemesi Olarak Hint Yağı Tabanlı Poliüretan Yapıştırıcılarda Kullanılabilirliğinin Araştırılması
Fatmanur Kübra Bakır, Bakır F, Mehmet Demir, Demir M, Özgür Karakaş, Karakaş Ö, Erdoğan Kanca, Kanca E
4th International Symposium on Innovative Approaches in Engineering and Natural Sciences 2019 https://doi.org/10.36287/setsci.4.6.123
Atık Hematitin Dolgu Malzemesi Olarak Hint Yağı Tabanlı Poliüretan Yapıştırıcılarda Kullanılabilirliğinin Araştırılması Fatmanur Kübra BAKIR1*+, Erdoğan KANCA 2 1Şampiyon Filtre Ar-Ge Merkezi, Hatay, Türkiye 2Makina Mühendisiliği / Mühendislik ve Doğa Bilimler…
Research Article
Open Access Design of Droop Controller in Microgrid Architectures
Ayşe Bağıran, Bağıran A, Köksal Erentürk, Erentürk K
4th International Symposium on Innovative Approaches in Engineering and Natural Sciences 2019 https://doi.org/10.36287/setsci.4.6.072
A microgrid is a power grid consists of distributed power generation units and loads. Microgrid is also a system that can operate in grid-connected mode and islanding (autonomous) mode. The control of distributed power generation units in microgrids is necessa…
Research Article
Open Access Classification of Induction Motors by Fault Type with bidirectional Long-Short Term Memory Method
Ahmet Ali Süzen, Süzen A, Kıyas Kayaalp, Kayaalp K
4th International Symposium on Innovative Approaches in Engineering and Natural Sciences 2019 https://doi.org/10.36287/setsci.4.6.074
It is important to determine the initial level of failures of induction motors used in many industrial applications. The sudden stops of the system can be prevented with the pre-detection of the fault. The experiment mechanism was established to detect mechani…
Research Article
Open Access Low Voltage Organic Field Effect Light Emitting Transistors with Vertical Geometry
Melek Uygun, Uygun M, Savaş Berber, Berber S
4th International Symposium on Innovative Approaches in Engineering and Natural Sciences 2019 https://doi.org/10.36287/setsci.4.6.112
The devices developed in the field of organic electronics in recent years are on the technological applications and development of organic electronic devices using organic semiconductor films. The main applications of the organic electronic revolution are; Ele…
Research Article
Open Access Determination Of Sediment Yield By GeoWEPP Erosion Estimation Model
Cengizhan Yıldırım, Yıldırım C, Mustafa Tüfekçioğlu, Tüfekçioğlu M
4th International Symposium on Innovative Approaches in Engineering and Natural Sciences 2019 https://doi.org/10.36287/setsci.4.6.127
The estimation of the sediment yield for Coruh watersheds should be determined in order to calculate the lifespan of the dams that are being already build. In order to determine sediment yield, information regarding topographic situation, vegetation, climate, …
Research Article
Open Access Curvilinear Glass Technologies In The Historical Urban Environment. A New Approach To Rehabilitation Of The Urban Tissue And Its Elements - Selected Examples.
Marta Banachowicz, Banachowicz M, Krystyna Januszkiewicz, Januszkiewicz K
4th International Symposium on Innovative Approaches in Architecture, Planning and Design 2019 https://doi.org/10.36287/setsci.4.7.054
The paper is deals with Glass Structures, used as a component of nonlinear shaping architectural forms in historical urban environment. These forms are treated as a city-event per analogies to Bernard Tschumi's theory of „event cities”. In this theory, the ess…
Research Article
Open Access A Quadratic Cascade DC/DC Boost Converter Design
Kemal Kaya, Kaya K, Yakup Hameş, Hameş Y
International Congress on Human-Computer Interaction, Optimization and Robotic Applications 2019 https://doi.org/10.36287/setsci.4.5.023
This study includes the design of quadratic cascade DC/DC boost converter with PI controller. Two or more cascade boost converters have been used to increase system efficiency. Advantages of the proposed converter compared to the conventional boost converter a…
Research Article
Open Access Comparative Analysis of PI and Sliding Mode Control Methods for Cascade DC/DC Boost Converters
Kemal Kaya, Kaya K, Yakup Hameş, Hameş Y
International Congress on Human-Computer Interaction, Optimization and Robotic Applications 2019 https://doi.org/10.36287/setsci.4.5.024
In this study, a single switch cascade DC/DC boost converter has been preferred instead of conventional cascade DC/DC boost converter to reduce cost and provide simple system control. High-performance controller design for DC/DC converters is the most importan…
Research Article
Open Access Theoretical & Experimental Shape Optimization Of Cantilever Beam by Constrained Optimization Method
Uğur Poyraz, Poyraz U, L. Özlem Akkan, Akkan L, Şahin Yavuz, Yavuz Ş
International Congress on Human-Computer Interaction, Optimization and Robotic Applications 2019 https://doi.org/10.36287/setsci.4.5.032
The term structural optimization is commonly used for the optimization of engineering structures, such as building, automobile, or airplane structures for improved strength, stiffness properties, fatigue life and reduced weight or cost. Main purpose of this st…
Research Article
Open Access Design and Development of a Hand Exoskeleton Robotic System
Jamshed Iqbal , Iqbal J
3rd International Symposium on Innovative Approaches in Scientific Studies (Engineering and Natural Sciences) 2019
Hand exoskeleton systems extend the mechanical sensing and manipulation capabilities of a human user in a real and/or virtual environment. Design of such a system needs careful consideration of associated requirements along with optimised, human-hand compatibl…
Research Article
Open Access A Smart Lighting Control System Using Solar Energy in The Scope of Internet of Things
Harun Ergün, Ergün H, İbrahim Alper Doğru, Doğru İ, Murat Dörterler, Dörterler M
3rd International Symposium on Innovative Approaches in Scientific Studies (Engineering and Natural Sciences) 2019
Artificial lighting is an important part of global electricity consumption. At office buildings, the energy consumed by artificial lighting can reach up to 40% of total energy consumption. This work is being done to find solutions to such problems with energy …
Research Article
Open Access T5 ve T7 Isıl İşlemlerinin Zn-15Al-3Cu-1Si Alaşımının Yağlı Çalışma Koşullarındaki Sürtünme ve Aşınma Özelliklerine Etkilerinin İncelenmesi
Temel Savaşkan , Savaşkan T, Ali Paşa Hekimoğlu , Hekimoğlu A
3rd International Symposium on Innovative Approaches in Scientific Studies (Engineering and Natural Sciences) 2019
Bu çalışmada kokil kalıba döküm yöntemiyle üretilen Zn-15Al-3Cu-1Si alaşımına T5 ve T7 ısıl işlemleri uygulandı. Alaşımın dökülmüş ve ısıl işlem görmüş durumlardaki numunelerinin içyapıları taramalı elektron mikroskobu (SEM) ve enerji dispersif spektrometresi …
Research Article
Open Access Gürültülü ve Gürültüsüz Ortamlarda Servo Sistemin Kalman Durum Kestirimi ve LQR Kontrolü
Nedime Merve Aydın, Aydın N, Ömer Aydoğdu, Aydoğdu Ö
3rd International Symposium on Innovative Approaches in Scientific Studies (Engineering and Natural Sciences) 2019
Doğru akım motoru servo sistemlerde önemli bir tahrik unsurdur. Hız veya konum denetimi gerektiren sistemlerde kolay denetlenebildiği ve yüksek performans gösterdiği için sıkça kullanılmaktadırlar. Bu çalışmada, bir DC servo sistemin modellenmesi, durum değişk…
Research Article
Open Access The Effect of Jet Impingement on the Performance of a Photovoltaic Module
Burak MARKAL, MARKAL B, Ramazan VAROL, VAROL R
3rd International Symposium on Innovative Approaches in Scientific Studies (Engineering and Natural Sciences) 2019
The cell temperature of a photovoltaic (PV) module increases with increasing irradiation rate, and this increment
adversely affects the output power or the electrical efficiency of the PV module. Therefore, in the present study, a series of
experiments are p…
