337 results for “phase-change materials”
Research Article
Open Access Faz Değişimli Malzemeler için Yüksek Hızlı Elektriksel Ölçüm Tekniği
Faruk Dirisağlık , Dirisağlık F, Ali Gökırmak , Gökırmak A
3rd International Symposium on Innovative Approaches in Scientific Studies (Engineering and Natural Sciences) 2019
Faz değişimli malzemeler, kristal yapıları sıcaklığa bağlı olarak değişen, kristal ve amorf fazlarında elektriksel ve optik özelliklerinde büyük farklılıklar gösteren malzemelerdir. Günümüzde, başta Flash ve DRAM hafıza teknolojilerine alternatif olarak görüle…
Research Article
Open Access Comparison of Control Methods Approaches in Microgrid Architectures
Ayşe Bağıran, Bağıran A, Köksal Erentürk, Erentürk K
4th International Symposium on Innovative Approaches in Engineering and Natural Sciences 2019 https://doi.org/10.36287/setsci.4.6.070
A microgrid is a power grid consists of distributed power generation units and loads. Microgrid is also a system that can operate in grid-connected mode and islanding (autonomous) mode. The control of distributed power generation units in microgrids is necessa…
Research Article
Open Access Best Practices and Policies Regarding Forestry in Response to Climate Change
Nuray Mısır, Mısır N, Mehmet Mısır, Mısır M, Cemile Çakır, Çakır C
2nd International Symposium on Innovative Approaches in Scientific Studies 2018
Forest functions traditionally included wood production, protection and forest recreation. The twofold role of
forests as both sources and sinks of greenhouse gases makes their influence on the climate extremely significant. This fact has
led to climate chan…
Research Article
Open Access Stronsiyum ve Stronsiyum-Magnezyum katkılarının Al-9Si Alaşımının Yapısal ve Mekanik Özelliklerine Etkisi
Ali Paşa Hekimoğlu, Hekimoğlu A, Merve Çalış, Çalış M, Gizem Ayata, Ayata G
Ist International Symposium on Innovative Approaches in Scientific Studies 2018
Bu çalışmada birer adet ikili Al-9Si, üçlü Al-9Si-0,1Sr ve dörtlü Al-9Si-0,1Sr-0,6Mg alaşımı indüksiyonlu ergitme ocağında ergitme ve oda sıcaklığında tutulan kokil kalıba döküm yöntemi ile üretildi. Alaşımların yapısal ve mekanik özellikleri üretilen alaşım k…
Research Article
Open Access Climate Change Oriented Design – Learning from Nature – Nature and Advanced Technology in architecture
Krystyna Januszkiewicz, Januszkiewicz K
4th International Symposium on Innovative Approaches in Architecture, Planning and Design 2019 https://doi.org/10.36287/setsci.4.7.049
This paper explores the possibilities of architectural design to benefit human condition, which encompasses physical environment of a safe life during the climate change era and predicted disasters. The first part deals with the problem of natural hazards and …
Research Article
Open Access Bidirectional Active Rectifier Phase Lock Loop Software Design for More Electric Aircraft
İ. Ethem Demiralay, Demiralay İ, A. Faruk Bakan, Bakan A
Proceeding of the 5th International Symposium on Innovative Approaches in Smart Technologies 2022 https://doi.org/10.36287/setsci.5.1.004
The next generation aircraft will be operated first with hybrid technology and then with purely electric technology, just like in the automobile industry. More electric aircraft concepts today have brought about a reorganization of the generation, transmission…
Research Article
Open Access PREDICTION OF HIGH-TEMPERATURE PERFORMANCE OF GEOPOLYMER MODIFIED ASPHALT BINDER USING ARTIFICIAL NEURAL NETWORKS
Mustafa Alas, Alas M, Shaban Ismael Albrka Ali , Albrka Ali S
2nd International Symposium on Innovative Approaches in Scientific Studies 2018
Complexity in the behavior of asphalt binders are further escalated with geopolymer (fly ash and the
alkali liquid) modification thus, making it difficult to predict the performance of the binder accurately. This study
employs artificial neural network model…
Research Article
Open Access Creep Behavior of Metallic Materials
Zakaria Boumerzoug, Boumerzoug Z
International Congress on Human-Computer Interaction, Optimization and Robotic Applications 2019 https://doi.org/10.36287/setsci.4.5.015
This paper presents the theoretical aspect of the creep behavior in materials, particularly in metallic materials. Different creep mechanisms were displayed. The main models developed to determine or extrapolate the rupture time of materials were presented. So…
Research Article
Open Access Analysis of Double Line-to-Ground Fault in an Unbalanced-Unloaded Synchronous Generator
Faruk Yalçın, Yalçın F, Sezgin Kaçar, Kaçar S, Aslan Çoban, Çoban A, İdris Cesur, Cesur İ
International Symposium on Multidisciplinary Studies and Innovative Technologies 2017
Analysis of faults in synchronous generators are so important to protect the generators and the power systems. In this paper, double line-to-ground fault analysis in unloaded synchronous generator is presented. Apart from the similar studies in the literature,…
Research Article
Open Access Image enhancement by using Hybrid methods based on Artificial Neural Networks
Gülhan Ustabaş Kaya, Kaya G, Zehra Saraç, Saraç Z
International Symposium on Multidisciplinary Studies and Innovative Technologies 2017
In this study, the elimination of zero diffraction order and twin image from three dimensional reconstructed images in digital holography and the image enhancement are desired to achieve in a short time by using hybrid methods. In addition, the brightness of t…
Research Article
Open Access An AI-Driven Drone-Integrated Mobile Photobioreactor System: A Novel Approach to Atmospheric Carbon Sequestration and Oxygen Emission
Betül Güroy, Güroy B
International Symposium on AI-Driven Engineering Systems 2025 https://doi.org/10.36287/setsci.22.31.001
A universally applicable “optimal photobioreactor” design has yet to be established, as the success of such systems varies depending on the algal species used, environmental conditions, and intended applications. Meanwhile, the accelerating pace of climate cha…
Research Article
Open Access A Conceptual Framework for AI-Assisted Monitoring in Microalgae Cultivation: A Case Study on Synechococcus elongatus PCC 3055
Betül Güroy, Güroy B, Derya Güroy, Güroy D, İzzet Şahin, Şahin İ, Serhan Mantoğlu, Mantoğlu S, Mustafa Rüçhan Pekcan, Pekcan M
International Symposium on AI-Driven Engineering Systems 2025 https://doi.org/10.36287/setsci.22.29.001
Microalgae are recognized as environmentally sustainable and biologically renewable resources for the production of high-value products such as biomass, biofuels, dietary supplements, and pharmaceuticals. However, their large-scale cultivation is highly sensit…
Research Article
Open Access Chromatographic Performance of Weak Cation Exchanger Carrying Molecular Brushes Synthesized by Atom Transfer Radical Polymerization
Berna S. Kaya, Kaya B, Ali Tuncel, Tuncel A
International Symposium on Multidisciplinary Studies and Innovative Technologies 2017
The column materials in the form of monodisperse and porous particles were synthesized with regard to test their column performances in Ion Exchange Chromatography (IEC) mode. Particles in the form of poly(glycidil methacrylate-coethyleneglycol dimethacrylate)…
Research Article
Open Access Chromatographic Performance of Weak Cation Exchanger Carrying Molecular Brushes Synthesized by Reversible Addition Fragmentation Chain Transfer Polymerization
Berna S. Kaya, Kaya B, Ali Tuncel, Tuncel A
International Symposium on Multidisciplinary Studies and Innovative Technologies 2017
The column materials in the form of monodisperse and porous particles were synthesized with regard to test their column performances in Ion Exchange Chromatography (IEC) mode. Particles in the form of poly(glycidil methacrylate-coethyleneglycol dimethacrylate)…
Research Article
Open Access Kesme Hızı ve İlerlemenin Al-35Zn Alaşımının İşlenebilirliğine Etkisinin İncelenmesi
Ali Paşa Hekimoğlu, Hekimoğlu A, Şenol Bayraktar , Bayraktar Ş, Yakup Turgut, Turgut Y
2nd International Symposium on Innovative Approaches in Scientific Studies 2018
Bu çalışmada yüksek ticari saflıkta (%99,8) alüminyum ve çinko elementleri kullanılarak bir adet ikili Al-35Zn
alaşımı üretildi. Alaşım elementlerinin ergitilmesinde orta frekanslı bir indüksiyon ocağı kullanıldı. Ergimiş durumdaki sıvı metal oda
sıcaklığınd…
Research Article
Open Access Exploring Disaster Vulnerability of Children in Urban Informal Settlements: A Built Environment Perspective
Atiya Rahman Piya, Piya A, Afroza Parvin, Parvin A
6th International Symposium on Innovation in Architecture, Planning and Design 2024 https://doi.org/10.36287/setsci.20.24.187
This study investigates the heightened vulnerability of children residing in disaster-prone informal settlements in the southwestern coastal city of Khulna, Bangladesh. The study focuses on both social and physical factors contributing to children's vulnerabil…
Research Article
Open Access The Process of Industrial Change and Social Transformation
Ercan Öztemel, Öztemel E
International Symposium on Multidisciplinary Studies and Innovative Technologies 2017
The paper aims is to highlight the unavoidable changes in industrial society together with the basic elements of this transformation as well as to take the attention of the readers on the healthiest change process. Some actions which are considered to be very …
Research Article
Open Access Climate-Adaptive Modular Micro-Living for Urban Regeneration: A Passive Design and Low-Carbon Construction Framework
Aydın Oğuz, Oğuz A, Osman Hansu, Hansu O
7th International Symposium on Innovation in Architecture, Planning and Design 2025 https://doi.org/10.36287/setsci.23.62.001
This study proposes a climate-adaptive framework for modular micro-living units as a construction-based response to growing urban challenges related to climate resilience, densification, and housing affordability. The design integrates prefabricated cross-lami…
Research Article
Open Access A Comparative Study of Quantitative Image Analyze and X-Ray Diffraction Methods for Carbide Amount in composite coatings on steel
Koray Kılıçay, Kılıçay K, Esad Kaya, Kaya E, İsmail Bayar , Bayar İ, Mustafa Ulutan, Ulutan M
Ist International Symposium on Innovative Approaches in Scientific Studies 2018
Carbides change highly effective on the mechanical and tribological properties of the coatings. For this reason, it is very important to determine the carbide ratio in the microstructure correctly. Researchers mostly try to determine phase ratios by optical im…
Research Article
Open Access Global Ağ Yapısına Dayalı Kuramoto Modelinde Senkronizasyonun Araştırılması
İrem Şenyer Yapıcı, Yapıcı İ, Rukiye Uzun, Uzun R
International Symposium on Multidisciplinary Studies and Innovative Technologies 2017
In the study synchronization was studied using an all-to-all network structure in a multiple system of Kuramoto oscillators. Synchronization performance was first investigated in a weakly connected system, and the effects of link strength and number of oscilla…