Ahşap Akustik Panellerin Opera Salonunda Dinleme Sonuçları
Abstract
Yaşadığımız her ortamda gürültü, yankı ve çift ses vardır. Bu tip durumların yaşandığı en çok ortamların kapalı ortamlar olduğu ve kapalı ortamlarda ise topluluk alanlarının yoğunlukla bulunduğu ortamlarda sezilmiştir. İnsanların geniş topluluk olarak sergilendiği en büyük ortamlar stadyumlar, konferans salonları derslik fabrika vb. gibi ortamlar başlangıç olarak gelmektedir. Gürültü ortamlarının kendi i Ortamı gürültüden arındırmak insanlar arasında iletişsek sorunların ortadan kaldırılmasını sağlar. Bunun için doğal kaynakların yanında suni kaynaklarında kullanılması kaçınılmazdır. Ahşap akustik paneller duyum kalitesini gürültüden arındıran duyulan seslerin berrak olmasını sağlayarak eko seviyesini en aza indiren malzemelerdir. Ahşap ses absorbsiyonu bakımından doğal bir malzeme olmasından dolayı ses emme kabiliyeti diğer malzemelere göre daha fazladır ve diğer malzemelere göre daha ucuzdur. Bu çalışmada 1381 kapasiteli konferans salonu örnek olarak alınmıştır. Konferans salonunun varsayılan malzemeler sırası ile yansıtıcı panelinde ham MDF panel, yan ve arka duvar emici panellerinde akustik nitelikli MDF panel (8mm çapında ve 16mm aralığında delikli), sahne portal ve tavan emici panel bölümünde akustik nitelikli MDF panel (3mm - 32mm) kullanılmıştır. Ayrıca mekânın zemininde halı, sahne zemininde ahşap parke, seyirci koltuklarında tekstil döşeme kaplaması kullanılmıştır. Sahne ortamı belirtilen materyaller kullanılarak ODEON 14.01 Auditorium benzetim programında incelenmiştir. Simülasyon programında Erken Düşüş Süresi (EDT), Yansışım Süresi T20- T30), Konuşma Anlaşılırlığı (Speech Transmission Index, STI), Netlik (D50) testleri yapılmıştır. Ve elde edilen analizler neticesinde mevcut salondaki ilk ve son değerler arasındaki N değerleri incelenmiştir. Bu inceleme sonucunda; EDT 1.12s, T20 1.70s, T30 1.00s, STI 0.65 ve D50 0.50 olarak elde edilen parametreler değerlendirilmiştir.
English-language details
Results of Wooden Acoustic Panels on The Opera Hall
There are noise, echo and double sound in every environment we live in. It was observed that most environments wheresuch situations were experienced were closed environments and in closed environments where the community areas wereconcentrated. The largest environments where people are exhibited as large communities are stadiums, conference halls,classrooms etc. environments such as; Noise environments have their own I Decompressing the environment noise eliminatesthe communicative problems among people. For this purpose, it is inevitable to use it in artificial sources as well as naturalresources. Wood acoustic panels are the materials that minimize the echo level by making the sounds that are clear of the noisequality of the senses to be clear. Due to the fact that wood is a natural material for sound absorption, its sound absorption abilityis higher than other materials and it is cheaper than other materials. In this study 1381 capacity conference hall was taken as anexample. The default materials of the conference hall were raw MDF panels on the reflective panel, acoustic MDF panels on theside and back wall absorbent panels (8mm diameter and 16mm perforated), stage gantry and acoustic MDF panels (3mm - 32mm)on the ceiling absorbent panel section. In addition, the floor of the floor carpet, wooden parquet on the stage floor, textile flooringin the seats were used. The scene environment was examined in the ODEON 14.01 Auditorium simulation program using thespecified materials. In the simulation program, Early Fall Time (EDT), Reflection Time T20- T30), Speech Transmission Index (STI), Clarity (D50) tests were performed. As a result of analyzes, N values between the first and last values in the existing hall were examined. As a result of this review; the parameters obtained as EDT 1.12s, T20 1.70s, T30 1.00s, STI 0.65 and D50 0.50 were evaluated.
Keywords
Cite this article
Telli, A., Çelik, C., & Mestan, A. (2019). Results of Wooden Acoustic Panels on The Opera Hall. In 3rd International Symposium on Innovative Approaches in Scientific Studies (Fine Arts, Design and Architecture) (pp. 167–178). SET Technology.
Article History
- Published
- 19 Aug 2019
License
© 2019 SET Technology. This article is distributed under the terms of the CC BY 4.0.